Abstract:This manuscript presents a comprehensive study on the optical, dielectric, and electrical properties of Al- and Cu-doped barium hexaferrite/cobalt–zinc-ferrite hybrid nanocomposites. The main objective of the study is to investigate how the concentration of two different materials, namely BaFe 12−0.5 Al 0.5 O 19 and BaFe 12−0.5 Cu 0.5 O 19 , affects the optical, dielectric, and electrical properties in the production of a composite material or the influence of Co 0.6 Zn 0.4 Fe 2 O 4 . The optical behaviour of the nanocomposite was investigated using UV–visible spectroscopy to obtain the absorption spectra. The dielectric and electrical behaviour was extracted from the absorption spectra, and the electrical properties of the nanocomposites were calculated using a simple theoretical model that requires only two parameters: the effective mass of the charge carriers and the activation energy determined from the Urbach and dielectric constants. The results show that the concentration of the hard-phase BaFe 12− x M x O 19 (M = Al, Cu) significantly influences the physical properties. The optical density showed peaks at 450 nm and 550 nm for the Al- and Cu-doped nanocomposites, indicating differences in their electronic structure. The skin depth showed an initial decrease followed by an increase, with minimum values of 400–500 nm and 500–600 nm for the two composites, respectively. The refractive index of 3.0–3.4 corresponds to semiconductors such as mercury sulphide and silicon and enables optoelectronic applications. The high transmittance of 400–800 nm is also suitable for temperature control and radiation shielding of spacecraft. By adjusting the BaFe 12− x M x O 19 concentration, the refractive index and reflectivity can be adjusted. Increased optical conductivity in the visible range reveals potential as an optical conductor. The dielectric constant and the loss factor also change with the composition, which enables the dielectric behaviour to be tuned. The real part of the dielectric constant increased exponentially while the imaginary part peaked around 2.2–2.8 eV, related to inter-band transitions. Both composites showed positive dielectric loss at higher energies, suggesting relaxation phenomena. Overall, the multifunctional nanocomposite holds promise for various applications including optoelectronics, photocatalysis, sensing, and rewritable memory that require low saturation magnetization and coercivity. The findings contribute to the development of advanced materials with desirable properties for modern technological applications.

Synthesis and characterization of BaAl2O4: Ce and Mn-Ce- co-doped BaAl2O4 composite materials by a modified polyacrylamide gel method and prediction of photocatalytic activity using artificial neural network (ANN) algorithm

Controllable Synthesis for Carbon Self-Doping and Structural Defect Co-Modified G-C3n4: Enhanced Photocatalytic Oxidation Performance and the Mechanism Insight

Effect of different doped elements on visible light absorption and ultraviolet light emission on Er 3:Y 3Al 5O 12

Preparation of Er3+:YAlO3/Fe-doped TiO2–ZnO and its application in photocatalytic degradation of dyes under solar light irradiation

Synthesis, Structural and Optical Properties of Mn-Doped Ceria Nanoparticles: A Promising Catalytic Material

Microstructure, optical, photoluminescence properties and the intrinsic mechanism of photoluminescence and photocatalysis for the BaTiO3, BaTiO3/TiO2 and BaTiO3/TiO2/CeO2 smart composites

Study on the regulation mechanism of Al doping on the controllable photocatalytic performance of the ZnO@MgAl-LDH nanocomposite

Blackened nanostructured BaTiO3 and heterojunction with g-C3N4 for enhancing photocatalytic and photoelectrochemical properties

Cerium-doped mesoporous BaTiO3/TiO2 nanocomposites: structural, optical and photocatalytic properties

Structural, optical, magnetic, and photocatalytic analysis of exclusive metal aluminates against Congo Red dye under UV light

A simple polyacrylamide gel route for the synthesis of MgAl2O4 nanoparticles with different metal sources as an efficient adsorbent: Neural network algorithm simulation, equilibrium, kinetics and thermodynamic studies

Synthesis and characterization of Alg/Gel/n-HAP/MNPs porous nanocomposite adsorbent for efficient water conservancy and removal of methylene blue in aqueous environments: Kinetic modeling and artificial neural network predictions

Mn2+ Doped Cobalt Oxide and Its Composite with Carbon Nanotubes for Adsorption-Assisted Photocatalytic Applications

Al-doped Nb3O7F Nanosheets: Preparation, Characterization and Photocatalytic Performance under Visible Light Irradiation

The enhanced photocatalytic performance of CPAA doping with different concentrations of Titanium oxide nanocomposite against MB dyes under simulated sunlight irradiations

Improving the Photocatalytic Performance of Porous Ceria under Visible Light Illumination via Mn Incorporation

Comprehensive Analysis of Optical, Dielectric, and Electrical Properties in Al- and Cu-Doped Barium Hexaferrite/Cobalt–Zinc Ferrite Hybrid Nanocomposites

TiO2/carbonaceous nanocomposite from titanium-alginate coordination compound

Preparation of modified humic acid/TiO2/P(AA-co-AM) nanocomposite hydrogels with enhanced dye adsorption and photocatalysis

Designing an eco-friendly Co/MnS/S-g-C3N4 nanocomposites: revolutionizing photocatalytic dye degradation and antibacterial efficiency

Nanoarchitectonics of Nickel Dimethylglyoxime/γ-alumina Composites: Structural, Optical, Thermal, Magnetic and Photocatalytic Properties