Large-Scale Fire Tests of Battery Electric Vehicle (BEV): Slovak Case Study

Jozef Svetlík,Zoltan Tancos,I. Marková,Petr Tancos,Kristián Slašťan

DOI: https://doi.org/10.3390/app14104013

2024-05-09

Applied Sciences

Abstract:Due to the increasing number of battery electric vehicles (BEV) on the roads and the number of BEV accidents with the occurrence of a fire, full-scale fire tests of BEVs were carried out. For initiation, the BEVs were mechanically damaged, forming a gap with a size of 15 cm × 15 cm. The external heat source was a 300 kW propane burner with a maximum power of 54.0 kW and a length of 54 cm. The flame of the propane–butane fuel mixed in air at a temperature of 1970 °C was inserted directly into the battery pack. The increase in the temperature was monitored as a function of time through thermocouples at selected locations of the BEV until the point of initiation. Thermocouples were placed 10, 30, and 50 cm from the place of BEV surface. Accordingly, to obtain the temperature–time curves from the experiment measurement, critical temperatures were subsequently evaluated. The fire tests on BEVs can be described according to the individual phases of the fire. The external heat source started the initiation process at the 25 min time mark. Consequently, the phase of a developed fire with a dynamic course started. A sharp rise in temperature occurred. Within two minutes, the temperature rose to 1056.9 °C. After the initiation source was removed, there was decline in temperature and re-ignition to the stage of a fully developed fire. Thermocouples recorded temperatures in the range of 900 °C. The resulting dynamic process of a BEV fire with a sharp increase in temperature is a problem for the implementation of firefighting works and the liquidation of traffic accidents. Furthermore, foam extinguishing was part of the experiments. In both cases after the foam application, the temperature on the thermocouple T1 (distance was 10 cm from the surface of the BEV) dropped from 486.1 °C to 76 °C after 10 s of application.

Engineering,Environmental Science

What problem does this paper attempt to address?

### The Problem the Paper Attempts to Solve

This paper aims to explore the fire evolution process and temperature growth characteristics of battery electric vehicles (BEVs) when exposed to an external fire source after mechanical damage through full-scale fire experiments. Specifically, the study focuses on:

1. **Impact of Mechanical Damage on NMC Batteries**: Investigating the behavior of an NMC battery with mechanical damage under the influence of an external fire source.
2. **Temperature Monitoring**: Monitoring the origin and development process of a BEV fire by placing thermocouples at selected locations and recording temperature changes at different time points.
3. **Fire Development Process**: Providing a detailed description of the different stages of the fire, including fire initiation, development stages, and situations of rapid temperature rise.

Through these experimental data, the paper attempts to provide important reference information for firefighting efforts and traffic accident handling involving BEV fires.