Abstract:The context of the Internet of Vehicles (IoV) and the growing vehicular deployment of sensors and smart devices have demanded alternative wireless communication technologies. Despite the prevalent works on radio-frequency (RF)-based vehicular communication technologies, visible-light communication (VLC) is envisaged to be a promising candidate due to its unlicensed spectrum and high transmission rates. However, the long-distance and high-speed transmission performance of vehicular VLC needs more investigation considering the massive data transmission needs for automotive applications. In this article, a vehicular multiple-input–multiple-output (MIMO) VLC system based on two commercial headlights and a self-designed PIN array is experimentally demonstrated as a proof of concept for the IoV. Considering the relative movement of vehicles, different communication areas are divided based on the position-dependent receiver receiving states. The boundary condition of each area is derived. For the first time, the selection of the strategy that best suits the MIMO demultiplexing scheme is discussed by analyzing the rank and type of the channel matrix. A modified pilot-aided phase recovery method based on polynomial curve fitting (PCF) is proposed to compensate for the phase noise caused by the sampling frequency offset (SFO). The proposed method maintains good robustness even when the VLC system suffers from the strong nonlinearity and bandwidth limitation of the headlights. Based on the proposed MIMO VLC system, we achieve a record-breaking data rate of 3.08 Gb/s at a 2-m indoor transmission link. We further extend the transmission distance to 100 m, and successfully achieve overall data rates of 336 and 362 Mb/s during the daytime and nighttime, respectively. To the best of our knowledge, these are the highest transmission data rates ever reported for a 100-m vehicular VLC system. Our experimental demonstration clearly verifies the feasibility of VLC in the application of IoV.

Vehicular Visible Light Communications for Automated Valet Parking

Automotive Visible-Light Communication:Alternative Devices and Systems

A Survey of Vehicular VLC Methodologies

Vehicular Communications: A Physical Layer Perspective

Poster: A VLC Solution for Smart Parking.

Vehicular Visible Light Communications: A Survey

Outdoor Road-to-Vehicle Visible Light Communication Using On-Vehicle High-Speed Camera

Self-Synchronising On-Off-Keying Visible Light Communication System For Intra and Inter-Vehicle Data Transmission

Investigating the performance of a vehicular communication system based on visible light communication (VLC)

Driving toward Connectivity: Vehicular Visible Light Communications Receiver with Adaptive Field of View for Enhanced Noise Resilience and Mobility

A New Automotive VLC System Using Optical Communication Image Sensor

Image-sensor-based visible light communication for automotive applications

Position-Dependent MIMO Demultiplexing Strategy for High-Speed Visible Light Communication in Internet of Vehicles

A Comprehensive Investigation on Multi-User Interference Effects in Vehicular Visible Light Communications

The Role of Bidirectional VLC Systems in Low-Latency 6G Vehicular Networks and Comparison with IEEE802.11p and LTE/5G C-V2X

INVISIBLE 2.0: An enhanced interference-based handover technique for visible light communications in vehicular networks

IEEE 802.15.7-Compliant Ultra-low Latency Relaying VLC System for Safety-Critical ITS

An Empirical Approach to Rerouting Visible Light Pathways Using an Adjustable-Angle Mirror to Sustain Communication between Vehicles on Curvy Roads

Vehicular Visible Light Communications Noise Analysis and Autoencoder Based Denoising

Multi-User Visible Light Communications: State-of-the-Art and Future Directions

VICO: A Framework for Configuring Indoor Visible Light Communication Networks