Abstract:According to the third-order simplified dynamic model of doubly-fed induction generator(DFIG),an equivalent method of DFIG wind farm based on the Thevenin circuit(EMBTC)is proposed.Firstly,based on the characteristics of mechanical power and rotor speed curve of wind turbine,a faster power flow calculation of power system with wind farm is carried on to determine the initial states of DFIGs.Then,off-line calculation is made to find the upper and down limits of injected wind speed when dynamical characteristics of transient electromotive force change evidently.The DFIGs in the wind farm are clustered according to the dynamic similarities.Secondly,the transient electromotive force buses of DFIGs in one group are aggregated to an equivalent bus through ideal transformers with complex ratios.Parameters of the equivalent DFIG are identified with a similar method of synchronous generators.According to the energy conservation law and a presumed mechanical power and rotor speed characteristics of the equivalent DFIG,the equivalent wind speed and the rotor speed are obtained.Finally,network reduction is accomplished by the elimination of phase shifting transformers,which determines the electrical connections between equivalent DFIG and the point of common coupling.Simulation results of an example wind farm with six DFIGs show that one-DFIG equivalent model has a high steady accuracy while the dynamical accuracy is relatively low.The dynamic precision can be effectively improved when three-DFIG equivalent model are utilized.The EMBTC is suitable for wind farms with complex connections and various wind speeds.

Dynamic State Estimation of a High-Order Model of Doubly-Fed Induction Generator Using Unscented Kalman Filter

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Decoupling Estimation of Parameters in Rotor Side Controller of DFIG-based Wind Turbine by Frequency Domain Method

Phase–amplitude Model for Doubly Fed Induction Generators

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Dynamic State Estimation for DFIG with Unknown Inputs Based on Cubature Kalman Filter and Adaptive Interpolation

Dynamic State Estimation Based on Unscented Kalman Filter and Very Short-Term Load and Distributed Generation Forecasting

Nonlinear Model Predictive Control for Doubly Fed Induction Generator with Uncertainties

Dynamic State Estimation of Power Systems Considering Maximum Correlation Entropy and Quadratic Function

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Robust Dynamic State Estimation for DFIG via the Generalized Maximum Correntropy Criterion Ensemble Kalman Filter

Dynamic Modeling and Control of DFIG for Wind Energy Conversion System Using Feedback Linearization

Dynamic State Estimation Method for Generator Considering Measurement of Bad Data

Steady State Modeling and Performance Analysis of a Wind Turbine-Based Doubly Fed Induction Generator System with Rotor Control

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

An Identification Method for Sequence Impedance Model of DFIG Based on the Joint of Knowledge Driving and Data Driving

Developed Square-Root Cubature Kalman Filter-based Solution for Improving Power System State Estimation with Unknown Inputs and Non-Gaussian Noise

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Dynamic state estimation of a grid-connected converter of a renewable generation system using adaptive cubature Kalman filtering

Dynamic state estimation of power system using hybrid whale-tunicate optimized unscented Kalman filter based on wide area measurement systems