Abstract:Dolomitic limestone is the main surrounding rock material in Yangzong tunnel engineering; the instantaneous mechanical properties and creep behaviors of limestone are significant for stability evaluation during the stages of tunnel excavation and long-term maintenance. Herein, four conventional triaxial compression tests were carried out to explore its instantaneous mechanical behavior and failure characteristics; subsequently, the creep behaviors of limestone subjected to multi-stage incremental axial loading at the confinements of 9 MPa and 15 MPa were studied by employing an advanced rock mechanics testing system (i.e., MTS815.04). The results reveal the following. (1) comparing the curves of axial strain-, radial strain-, and volumetric strain-stress under different confining pressures shows that these curves present a similar trend, whereas the stress drops during the post-peak stage decelerate with the increase in confining pressure, suggesting that the rock transits from brittleness to ductility. The confining pressure also has a certain role in controlling the cracking deformation during the pre-peak stage. Besides, the proportions of compaction- and dilatancy-dominated phases in the volumetric strain-stress curves differ obviously. Moreover, the failure mode of the dolomitic limestone is a shear-dominated fracture but is also affected by the confining pressure. (2) When the loading stress reaches a creep threshold stress, the primary and steady-state creep stages occur successively, and a higher deviatoric stress corresponds to a greater creep strain. When the deviatoric stress surpasses an accelerated creep threshold stress, a tertiary creep appears and then is followed by creep failure. Furthermore, the two threshold stresses at 15 MPa confinement are greater than that at 9 MPa confinement, suggesting that the confining pressure has an obvious impact on the threshold values and a higher confining pressure corresponds to a greater threshold value. Additionally, the specimen's creep failure mode is one of "abrupt" shear-dominated fracturing and is similar to that under a conventional triaxial compression test at high confining pressure. (3) A multi-element nonlinear creep damage model is developed by bonding a proposed visco-plastic model in series with the Hookean substance and Schiffman body, and can accurately describe the full-stage creep behaviors.

Mechanical Properties and Nonlinear Energy Evolution of Holed Limestone Under Hydro-Mechanical Coupling

Numerical simulation of mesomechanical properties of limestone containing dissolved hole and persistent joint

Time-dependent behavior and permeability evolution of limestone under hydro-mechanical coupling

Experimental study on the mechanical and permeability behaviors of limestone under hydro-mechanical-coupled conditions

Triaxial Creep Mechanical Behaviors and Creep Damage Model of Dolomitic Limestone Material under Multi-Stage Incremental Loading

Mechanical characteristics of single cracked limestone in compression-shear fracture under hydro-mechanical coupling

Numerical simulation of micro crack evolution and failure modes of limestone under uniaxial multi-level cyclic loading

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Experimental Studies on Cracking and Local Strain Behaviors of Rock-Like Materials with a Single Hole before and after Reinforcement under Biaxial Compression

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

A Study on the Permeability and Damage Characteristics of Limestone under Stress–Seepage Coupling Conditions

Strength and damage evolution mechanism of rock mass with holes under cyclic loading

Deformation and mechanical properties of rock: effect of hydromechanical coupling under unloading conditions

Hydromechanical coupling tests for mechanical and permeability characteristics of fractured limestone in complete stress–strain process

Nonlinear Elasto-Visco-Plastic Creep Behavior and New Creep Damage Model of Dolomitic Limestone Subjected to Cyclic Incremental Loading and Unloading

Creep Behavior of Intact and Cracked Limestone Under Multi-Level Loading and Unloading Cycles

Mechanical properties and nonlinear deformation description model of cement stone

Study on Dynamic Mechanical Properties of Limestone under Uniaxial Impact Compressive Loads

Study on the evolution of permeability properties of limestone under different stress paths

Brittleness evaluation and damage evolution of sandstone under hydromechanical coupling

Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression