Abstract:This article presents a novel design approach of a reconfigurable filter with switchable operating frequency, bandwidth, and response type. Boolean-like operations, including intersection and complement, of frequency responses are defined, as the basic design principle. The switchable filtering responses are discussed in detail when utilizing one-or two-channel filters with overlapping passbands. It is easy to extend the properties to the N -stage case of a reconfigurable filter. Generally, for a cascaded N -stage reconfigurable filter, one can achieve 2N(2)+ 2 filtering responses, including (3N-1) N/2 bandpass responses, (N+1)N/2 bandstop responses, along with an all-pass (AP) response and an all-stop (AS) response. As the basic building block, a switchable filter unit consists of a channel bandpass filter (BPF), a circulator, and three RF switches, whose response type can be reconfigured by adjusting the states of the switches. A single-stage switchable filter unit and a three-stage reconfigurable filter prototype are developed with microstrip structures. The reconfigurable filter prototype offers 20 different filtering responses with only three channel filters, occupying an area of 1.21x 0.69 lambda(2)(g). For the provided bandpass responses, the 12 passbands cover 1.17 similar to 1.6 GHz with selectable bandwidths of 60.6 similar to 245.4 MHz, with in-band insertion losses (ILs) of 5.1 similar to 7.9 dB. For the bandstop responses, the six suppression bandwidths are 227.6 similar to 368.1 MHz, with an in-band suppression of 16.3 similar to 22.5 dB. The IL is 3.5 dB for the AP response, and the suppression level is 63 dB for the AS response. Good agreement is obtained between the simulated and measured results to validate the proposed technique.

A wideband reconfigurable filtering phase shifter based on Stub-loaded multimode resonators

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Direct synthesis method of wideband tunable filtering phase shifter based on complex matched transversal multiple resonances

Design of A Reconfigurable Filtering Switch with Sharp Rejection and Wide Stopband

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Novel Passive Vector-Sum Reconfigurable Filtering Phase Shifter With Continuous Phase-Control and Tunable Center Frequency

Novel Multifunctional Reconfigurable Wideband Frequency-Selective Filter/Shielding With Independently Controlled Operating Modes

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

Design of Wideband Tunable Filtering Phase Shifter with Switchable TTD or CPD Phase Mode

A Novel Wideband 90° Filtering Phase Shifter Using Broadside-Coupled MSLs

Novel Passive Vector-Sum Amplitude-Variable Phase Shifter With Integrated Reconfigurable Filtering Function

Design of Ultraflat Phase Shifters Using Multiple Quarter-Wavelength Short-Ended Stubs

Wideband Bandpass Frequency-Selective Structures on Stacked Slotline Resonators: Proposal and Synthetic Design

Novel Phase Shifters Using Short-Circuited Cross-Slotted Patch Resonator

High Selectivity Wideband 180° Phase Shifters with the Functionality of Vertical Transition

Reconfigurable Filter with Switchable Operating Frequency, Bandwidth, and Response Type Using RF Switches and Circulators

Reconfigurable Bandpass Filter With Multi-Band Switching and Band Shiftability

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

Design of Filtering Tunable Liquid Crystal Phase Shifter Based on Coplanar Waveguide and Split-Ring Resonators

High Selectivity Wideband Bandpass Filter Based on Stepped Impedance Open Stubs Loaded Ring Resonator

Compact Tri-Band Bandpass Filter Using Asymmetric Stub-Loaded Stepped-Impedance Resonator with Multiple Transmission Zeros