Abstract:The performance of three centrifugal pumps designed to operate at a rotational speed of 151.84 rad/s and flow rates of 1, 25, and 45 kg/s is being investigated for both water and non-Newtonian fluids at various rotational speeds and flow rates. The analyses are being conducted experimentally and numerically within the flow rate range of 0.25–55 kg/s and rotational speed values between 52.36 and 151.84 rad/s. Additionally, artificial neural networks (ANN) trained using experimental pump performance data are being tested with experimental and numerical values obtained at a new rotational speed of 130.9 rad/s. The non-Newtonian fluids being tested include CMC 0.2% and CMC 0.4%, comprising carboxy methyl cellulose (CMC) solution and water. The results indicate that the pump's performance when handling non-Newtonian fluids is significantly influenced by the pump's geometry, rotational speed, and flow rate. In design parameters, the head obtained with 0.2% CMC for pump 1 is 3.3% greater than that in water. For pump 2, the highest head is in water according to design parameters. Pump 3 exhibits the highest head at a CMC of 0.4 in design parameters, and this value is 0.81% higher than the value with water. Experimental and numerical results demonstrate good agreement, especially in design parameters. The head obtained from numerical analyses with the RNG k – ε turbulence model for pumps 1, 2, and 3 at design parameters is 3, 10, and 9.83 m, respectively. The corresponding experimental heads are 3, 10, and 9.84 m, respectively. However, discrepancies between these results increase with higher flow rates and the use of non-Newtonian fluids. The compatibility of ANN results with experimental results is better than with numerical results, particularly at higher flow rates than the design condition. Pump performance values estimated by ANNs are 2% lower than the experimental results. This study provides comprehensive experimental data on the use of non-Newtonian fluids in different centrifugal pumps, and it also offers important guidance for future research by comparing ANN and computational fluid dynamics.

Performance Prediction of a Pump as Turbine: Sensitivity Analysis Based on Artificial Neural Networks and Evolutionary Polynomial Regression

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Selection and Performance Prediction of a Pump as a Turbine for Power Generation Applications

Prediction method of centrifugal pump running in turbine mode based on losses analysis

Artificial neural network for the performance improvement of a centrifugal pump

Multi-objective Optimization of a Low Specific Speed Centrifugal Pump Using an Evolutionary Algorithm

The pump as a turbine: A review on performance prediction, performance improvement, and economic analysis

Performance Prediction and Geometry Optimization for Application of Pump as Turbine: A Review

Energy performance prediction of pump as turbine (PAT) based on PIWOA-BP neural network

Theoretical Model of Energy Performance Prediction and BEP Determination for Centrifugal Pump As Turbine

Estimation of the performance of different pumps using non-Newtonian fluids in various operating conditions with artificial neural network

Energy performance prediction of the centrifugal pumps by using a hybrid neural network

Numerical prediction on over-all performance of double suction pump reverse running as turbine

Theoretical, experimental, and numerical methods to predict the best efficiency point of centrifugal pump as turbine

Using Neural Networks as a Data-Driven Model to Predict the Behavior of External Gear Pumps

Towards Predictive Maintenance of a Heavy-Duty Gas Turbine A New Hybrid Intelligent Methodology for Performance Simulation

CFD and Neural Network-Based Predicting for Oil Delivery Performance of Oil Pump in Engines

Probabilistic Modeling and Prediction of Dynamic Discharge Process in Multiphase Pumps

Interference recommendation for the pump sizing process in progressive cavity pumps using graph neural networks

Optimization of Hydraulic Efficiency and Internal Flow Characteristics of a Multi-Stage Pump Using RBF Neural Network

A Feed-Forward Backpropagation Neural Network Method for Remaining Useful Life Prediction of Francis Turbines