Abstract:Li-metal batteries have the potential to become the next generation of batteries since they can provide an increased energy density vs. Li-ion batteries. However, the safety issue caused by the inhomogeneous Li deposition and Li dendrite growth greatly limits their commercial application. Several methods have been proposed to address this issue. On the one hand, when Li ions are released from one electrode and consumed at the other electrode, it causes a salt concentration gradient. Besides, the electrical migration of anions in the opposite direction aggravates the concentration of gradient since anions do not react at the electrodes. Fast dendritic growth then occurs when the current is high enough to fully deplete the Li+ ion at the anode during charge. Thus, suppressing concentration gradient by immobilizing the anions would in principle solve the fast dendritic growth issue. On the other hand, the Solid Electrolyte Interphase (SEI) plays a crucial role in the operation of Li metal batteries since it prevents further reduction and continuous electrolyte reaction. SEI derives from the passivation layer formed onto the surface of Li metal under dry air during lithium foil extrusion and then evolves further in contact with the electrolytes and during subsequent electrochemical Li stripping/plating. The SEI is inhomogeneous and since it contains lower resistance pathways for Li+ transport, it favors inhomogeneous deposition at any current. Thus, SEI engineering, in order to favor the homogeneity of current density and enhanced mechanical properties to confine lithium could, in principle, improve the performance of Li metal batteries. Thus, we studied the use of single-ion conducting polymers with high cationic transference numbers (tLi + close to 1) as artificial SEIs (art-SEIs) since they include immobile anions and thus prevent Li+ depletion during charge and, at the same time, improve lithium metal confinement and the homogeneity of current density. Our results show much improved homogeneity of Li deposition and cycling stability after single-ion art-SEI coating using an ether-based liquid electrolyte combined with a separator. Nevertheless, it could not enable long-term cycling as the separator does not enable homogeneous pressure and current density onto the lithium anode. Thus, the use of a single-ion conducting solid polymer electrolyte was combined with a single-ion conducting art-SEI (as illustrated in Figure 1). This strategy allows the suppression of salt concentration gradients, inhomogeneous pressure and current density, thus enables homogeneous Li deposition and long-term cycling of Li metal anode. Figure 1

Cation-polymerized artificial SEI layer modified Li metal applied in soft-matter polymer electrolyte

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Rigid and Flexible SEI Layer Formed Over a Cross‐Linked Polymer for Enhanced Ultrathin Li Metal Anode Performance

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Organic-inorganic composite SEI for a stable Li metal anode by in-situ polymerization

Interphase Building of Organic–Inorganic Hybrid Polymer Solid Electrolyte with Uniform Intermolecular Li + Path for Stable Lithium Metal Batteries

A Dual Functional Artificial SEI Layer Based on a Facile Surface Chemistry for Stable Lithium Metal Anode

A Multifunctional Silicon‐Doped Polyether Network for Double Stable Interfaces in Quasi‐Solid‐State Lithium Metal Batteries

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Artificial Single-Ion Conducting Polymer Solid Electrolyte Interphase Layer toward Highly Stable Lithium Anode

Self-healing single-ion-conductive artificial polymeric solid electrolyte interphases for stable lithium metal anodes

Boosting stable lithium deposition via Li3N-Enriched inorganic SEI induced by a polycationic polymer layer

Artificial SEI Layer Combined with Single-Ion Polymer Electrolytes to Prevent Dendrite Growth in Lithium Metal Batteries

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Organophosphorus Hybrid Solid Electrolyte Interphase Layer Based on LixPO4 Enables Uniform Lithium Deposition for High‐Performance Lithium Metal Batteries

A Polymer-Reinforced SEI Layer Induced by a Cyclic Carbonate-Based Polymer Electrolyte Boosting 4.45 V LiCoO2 /Li Metal Batteries

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries

Organophosphorus Hybrid Solid Electrolyte Interphase Layer Based on Li x PO 4 Enables Uniform Lithium Deposition for High‐Performance Lithium Metal Batteries

Constructing robust polymer/two-dimensional Ti3C2TX solid-state electrolyte interphase via in-situ polymerization for high-capacity long-life and dendrite-free lithium metal anodes