Abstract:An urban hydrological model (UHM) forced by radar-observed rainfalls was developed for producing rainstorm-related urban inundation maps for obtaining flash flood forecasts. The parameter sets of the land use and land cover (LULC) and urban drainage capacity derive from satellite multispectral images and high spatial resolution GIS datasets, relating to the urban hydrology and hydraulic properties. The hydrodynamics model was based on the simplified shallow water equation (SWE) neglecting the convective acceleration and pressure terms in the St. Venant equation. The intense convective rainstorm that induced heavy flash floods on 21 Jul. 2012 and the large-scale stratiform precipitation that occurred from 19 Jul. to 21 Jul. 2016 in Beijing were deliberately selected to perform flood-simulation and model-validation case studies. The simulation of severe flooding scenarios in the 2012 event was fairly reproduced and verified using media reports. In the case studies, the sensitivity tests verified that the flood intensity (1) would be enhanced slightly on pure impervious surfaces, (2) would be reduced significantly on pure pervious surfaces, and (3) would increase by 30%–60% without a drainage system. No false alarm could be perceived in the simulation of the 2016 event in a prolonging stratiform precipitation. The case studies confirmed the perspectives of using the hydrological model fed by QPEs/QPFs for flash flood forecasting and concluded that the hourly precipitation surpassing 30 mm/h would be indicative in impending flash floods in Beijing metropolis.

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve This paper aims to develop an Urban Hydrological Model (UHM) to simulate and analyze urban flash floods and explore the sensitivity of flood intensity to urbanization. Specifically, the research objectives include: 1. **Simulating Urban Flash Floods**: By integrating radar-observed rainfall data, generate urban inundation maps related to heavy rainfall to achieve flash flood forecasting. 2. **Analyzing Sensitivity of Flood Intensity to Urbanization**: Evaluate the impact of different Land Use and Land Cover (LULC) types and urban drainage systems on flood intensity. 3. **Validating the Model's Effectiveness**: Conduct model validation and case studies by selecting two significant rainstorm events that occurred in Beijing on July 21, 2012, and from July 19 to 21, 2016. ### Research Background Urban flash floods refer to floods that occur within a short period (from minutes to hours) in small basins, usually covering an area of a few hundred square kilometers. These floods are considered one of the most dangerous types of floods globally and are occurring with increasing frequency. Climate change is believed to be a major factor causing rainstorm-induced floods. Additionally, changes in land use and land cover due to urbanization not only affect local weather and climate patterns but also alter urban hydrological responses and hydraulic characteristics, making cities more prone to flash floods. However, existing urban drainage system design standards often fail to adequately consider the impact of future climate change, resulting in current urban drainage systems being insufficient in coping with flash floods. ### Research Methods 1. **Data Sources**: - **Radar Rainfall Estimation**: Use radar rainfall estimation and forecast data from the Beijing Meteorological Bureau's automatic nowcasting system (BJ_ANC). - **Digital Elevation Model (DEM)**: Use 30-meter resolution DEM data provided by the Beijing Institute of Surveying and Mapping. - **Land Use and Land Cover (LULC)**: Use 30-meter resolution GlobeLand30 data provided by the National Geomatics Center of China. - **Drainage Conveyance Capacity (DCC)**: Based on 1:2000 scale GIS datasets and population density data from the Beijing Statistical Yearbook. 2. **Model Construction**: - **Surface Runoff**: Estimate infiltration rates using the Horton model and calculate runoff volumes for impervious and pervious surfaces. - **Urban Drainage System**: Estimate the conveyance capacity of the drainage system based on road grades and design standards. - **Hydrodynamic Model**: Simulate water flow rates and volumes using simplified 2D shallow water equations (SWE), ignoring convective acceleration and pressure terms. 3. **Case Studies**: - **July 21, 2012, Beijing Heavy Rainstorm**: Simulate the flood scenario of this event and validate it against media reports. - **July 19-21, 2016, Beijing Persistent Rainfall**: Simulate the flood scenario of this event and validate the model's performance in long-duration rainfall events. ### Main Conclusions 1. **Model Validation**: The flood scenario of the 2012 event was successfully reproduced and validated against media reports. The simulation results of the 2016 event also indicated that the model did not produce false alarms in long-duration rainfall events. 2. **Sensitivity Analysis**: The study showed that purely impervious surfaces slightly enhance flood intensity, purely pervious surfaces significantly reduce flood intensity, and areas without drainage systems experience a 30%-60% increase in flood intensity. 3. **Flood Intensity Index**: A flood intensity index was defined to comprehensively reflect the severity of floods, including inundation depth, duration, and coverage. ### Significance This study provides effective tools and technical support for the forecasting and risk management of urban flash floods, helping to improve urban flood control capabilities and the ability to respond to sudden disasters.

Urban hydrological model (UHM) developed for an urban flash flood simulation and analysis of the flood intensity sensitivity to urbanization

Porous Shallow Water Modeling for Urban Floods in the Zhoushan City, China

Urban Flood Risk Assessment Using Storm Characteristic Parameters Sensitive to Catchment-Specific Drainage System

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

STFS-urban: Spatio-temporal flood simulation model for urban areas

Urban Flood Modeling and Risk Assessment with Limited Observation Data: The Beijing Future Science City of China

High efficiency integrated urban flood inundation simulation based on the urban hydrologic unit

Assessing the Effects of Urbanization on Annual Runoff and Flood Events Using an Integrated Hydrological Modeling System for Qinhuai River Basin, China

Monitoring and Simulation of Urban Hydrological Unit: A Case Study of Tsinghua University, Beijing

Urban flood simulation based on the SWMM model

Development of an Integrated Urban Flood Model and Its Application in a Concave-Down Overpass Area

Study of the hydrologic and hydrodynamic coupling model (HHDCM) and application in urban extreme flood systems

Urban flood inundation and damage assessment based on numerical simulations of design rainstorms with different characteristics

A large-scale waterlogging investigation in a megacity

Uncertainties of urban flood modeling: Influence of parameters for different underlying surfaces

An Improved Coupled Hydrologic-Hydrodynamic Model for Urban Flood Simulations Under Varied Scenarios

Hydrologically Enhanced Distributed Urban Drainage Model and Its Application in Beijing City

Assessment of the impact of climate change on urban flooding: a case study of Beijing, China

Urban inundation response law analysis to characteristics of designed rainstorms based on coupled hydrodynamic and rainfall-tracking model

Development of an Urban Rainstorm Flood Simulation Model Based on A Plain Flood Model

Modelling Flash Flood Risk in Urban Areas