Noble-metal-free hexagonal wurtzite CdS nanoplates with exposed (110) and (112) crystal facets for efficient visible-light H 2 production

Chao Zhang,Xi Cheng,Baoquan Liu,Zhenmei Guo,Guangxiang He,Zhiguo Lv

DOI: https://doi.org/10.1039/d0nj04778c

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:Hexagonal wurtzite CdS has been regarded as one of the most promising semiconductors for photocatalysis.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Construction of Sugar-Gourd-shaped CdS/Co1-xS Hollow Hetero-Nanostructure As an Efficient Z-scheme Photocatalyst for Hydrogen Generation

Lei Li,Changfa Guo,Junling Shen,Jiqiang Ning,Yijun Zhong,Yong Hu

DOI: https://doi.org/10.1016/j.cej.2020.125925

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:Hollow hetero-nanostructures have unique advantages for energy storage and conversion and are highly desirable for their photocatalysis applications. We herein report the synthesis of an unusual sugar-gourd-shaped hollow hetero-nanostructure, Co1-xS hollow polyhedrons (HPs) skewered on CdS nanowires (NWs) (CdS/Co1-xS HHNSs), through a facile two-step strategy of growing ZIF-67 on CdS NWs followed by a sulfidation reaction. The loading amounts of Co1-xS HPs on an individual CdS NW can be adjusted by simply controlling the content of the Co1-xS precursor in the reaction. The coupling of the Co1-xS HPs with the CdS NWs not only broadens the solar light harvesting spectrum from ultraviolet to near infrared region, but also results in abundant Co vacancies as well as sides and facets with lots of active sites. More importantly, in-situ irradiated X-ray photoelectron spectroscopy confirms the direct Z-scheme transfer pathway of photogenerated charge carriers in the heteronanostructure, which facilitates the separation of photogenerated electron-hole pairs and induces strong photoreduction ability due to lower aligned conductor band of Co1-xS. As a result, the gular-gourd-shaped CdS/Co1-xS HHNSs are demonstrated as an efficient visible light-driven photocatalyst for H-2 production. A H-2 production rate of 13.48 mmol g(-1) h(-1) is achieved with optimized CdS/Co1-xS HHNSs without using any additional co catalyst. This is the first report on the performance of Co vacancies in Co1-xS hollow nanostructures for photocatalysis which inspire the development of unusual hollow hetero-nanostructures as efficient photocatalysts by means of morphology design and interfacial electronic modulation.
A Noble‐Metal‐Free CdS/Ni3S2@C Nanocomposite for Efficient Visible‐Light‐Driven Photocatalysis

Yu Cui,Yun-Xiang Pan,Haili Qin,Huai-Ping Cong,Shu-Hong Yu

DOI: https://doi.org/10.1002/smtd.201800029

IF: 12.4

2018-01-01

Small Methods

Abstract:Searching for highly efficient noble-metal-free visible-light-driven photocatalysts for hydrogen evolution has attracted much attention. Herein, a facile method for synthesis of a noble-metal-free CdS/Ni3S2@C nanocomposite by dispersing CdS quantum dots (<= 5 nm) on urchin-like Ni3S2 coated by a 5-nm-thick carbon layer is reported. It can be used for highly efficient visible-light-driven photocatalytic H-2 production from H2O. The H-2 production rate on CdS/Ni3S2@C (1164.7 mu mol h(-1)) is about 3.5 times higher than that on the noble-metal-based CdS/Pt (325.2 mu mol h(-1)). The CdS-carbon and carbon-Ni3S2 interfaces are favorable for charge separation and the improved visible light absorbance could be the origin for the enhanced photocatalytic activity of CdS/Ni3S2@C. This work provides a model system for rationally designing efficient noble-metal-free photocatalysts for visible-light-driven photocatalysis.
Bare Cd1-Xznxs Zb/Wz Heterophase Nanojunctions for Visible Light Photocatalytic Hydrogen Production with High Efficiency

Hong Du,Kuang Liang,Cheng-Zong Yuan,Hong-Li Guo,Xiao Zhou,Yi-Fan Jiang,An-Wu Xu

DOI: https://doi.org/10.1021/acsami.6b06182

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:In this work, we report the synthesis of Cd1-xZnxS zinc blende/wurtzite (ZB/WZ) heterophase nanojunctions with highly efficient charge separation by a solvothermal method in a mixed solution of diethylenetriamine (DETA) and distilled water. L-Cysteine was selected as a sulfur source and a protecting ligand for stabilization of the ZB/WZ homojunction. The optimal ternary chalcogenide Cd0.7Zn0.3S elongated nanocrystals (NCs) without any cocatalyst loading show very high visible light photocatalytic activity-with H-2 production efficiency of 3.13 mmol h(-1) and an apparent quantum efficiency of 65.7% at 420 nm. This is one of the best visible light photocatalysts ever reported for photocatalytic hydrogen production without any cocatalysts. The charge separation efficiency, having a critical role in enhancing photocatalytic activity for hydrogen production, was significantly improved. Highly efficient charge separation with a prolonged carrier lifetime is driven by the internal electrostatic field originating from the type-II staggered band alignment at the ZB/WZ junctions, as confirmed by steady and time-resolved photoluminescence spectra. Further, the strong binding between the L-cysteine ligand and Cd1-xZnxS elongated nanocrystals protects and stabilizes NCs; the L-cysteine ligand at the interface could trap holes from Cd1-xZnxS NCs, while photogenerated electrons transfer to Cd1-xZnxS catalytic sites for proton reduction. Our results demonstrate that Cd1-xZnxS ZB/WZ heterophase junctions stabilized by L-cysteine molecules can effectively separate charge carriers and achieve highly visible light photocatalytic hydrogen production. The present study provides a new insight into the design and fabrication of advanced materials with homojunction structures for photocatalytic applications and optoelectronic devices.
Defected tungsten disulfide decorated CdS nanorods with covalent heterointerfaces for boosted photocatalytic H2 generation

Zige Tai,Guotai Sun,Ting Wang,Zhiyu Fang,Xiaoxiong Hou,Fan Li,Yuqian Qiu,Qian Ye,Lichao Jia,Hongqiang Wang

DOI: https://doi.org/10.1016/j.jcis.2022.08.074

IF: 9.9

2022-12-15

Journal of Colloid and Interface Science

Abstract:Owing to their intrinsic and pronounced charge carrier transport when facing the formidable challenge of inhibiting severe surface charge recombination, one-dimensional (1D) CdS nanostructures are promising for advancing high-yield hydrogen production. We herein demonstrate an efficient strategy of boosting interfacial carrier separation by heterostructuring 1D CdS with defective WS2. This process yields solid covalent interfaces for high flux carrier transfer that differ distinctively from those reported structures with physical contacts. As a nonnoble cocatalyst, WS2 can accept photogenerated electrons from CdS, and the sulfur vacancies existing at its edges can effectively trap electrons as active sites for H2 evolution. Moreover, due to its strong negative property, the H+ from the aqueous solution can gather around WS2. WS2 possesses a lower reaction barrier than CdS, which expedites the kinetic process for the reaction. The optimized sample exhibits a high photocatalytic H2 evolution rate of 183.4 μmol/h (10 mg photocatalyst), which is as far as we know among the top in the records for CdS-based photocatalysts. We believe this present work will be inspiring in addressing the interfacial charge carrier transfer by constructing covalent heterointerfaces.

chemistry, physical
Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible-Light-Driven Photocatalytic Oxygen Production.

Yu Lei Wang,Y. Li,Lining Fang,H. Yang,A. Chen,Xue Lu Wang,X. Du,Junting Zhao

DOI: https://doi.org/10.1002/asia.201601471

2017-02-16

Chemistry - An Asian Journal

Abstract:Facilitating charge-carrier separation and transfer is fundamentally important to improve the photocatalytic performance of semiconductor materials. Herein, two-dimensional hexagonal WO3 nanoplates were synthesized by a two-step route: rapid evaporation and solid-phase sintering. The as-prepared WO3 exhibits an enhanced activity of photocatalytic water oxidation compared to bulk monoclinic WO3 . The electron dynamics analysis reveals that a more efficient charge-carrier separation in the former can be obtained, the origin of which can be attributed to an increased number of surface defects in hexagonal WO3 nanoplates. This work not only presents a novel and simple method to produce two-dimensional hexagonal WO3 nanoplates, but also demonstrates that surface defects and two-dimensional geometric structures can promote the charge separation, which may be extended to the design of other efficient photocatalysts.

Chemistry,Medicine,Materials Science
Single Crystalline Quaternary Sulfide Nanobelts for Efficient Solar-to-hydrogen Conversion

Liang Wu,Qian Wang,Tao-Tao Zhuang,Yi Li,Guozhen Zhang,Guo-Qiang Liu,Feng-Jia Fan,Lei Shi,Shu-Hong Yu

DOI: https://doi.org/10.1038/s41467-020-18679-z

IF: 16.6

2020-01-01

Nature Communications

Abstract:Although solar-driven water splitting on semiconductor photocatalysts is an attractive route for hydrogen generation, there is a lack of excellent photocatalysts with high visible light activity. Due to their tunable bandgaps suitable for superior visible-light absorption, copper-based quaternary sulfides have been the important candidates. Here, we first assessed the preferred facet of wurtzite Cu-Zn-In-S for photocatalytic hydrogen evolution reaction using the relevant Gibbs free energies determined by first principle calculation. We then developed a colloidal method to synthesize single crystalline wurtzite Cu-Zn-In-S nanobelts (NBs) exposing (0001) facet with the lowest reaction Gibbs energy, as well as Cu-Zn-Ga-S NBs exposing (0001) facet. The obtained single crystalline Cu-Zn-In-S and Cu-Zn-Ga-S NBs exhibit superior hydrogen production activities under visible-light irradiation, which is composition-dependent. Our protocol represents an alternative surface engineering approach to realize efficient solar-to-chemical conversion of single crystalline copper-based multinary chalcogenides.
Enhanced Photocatalytic H2 Production on CdS Nanorods with Simple Molecular Bidentate Cobalt Complexes As Cocatalysts under Visible Light.

Rana Muhammad Irfan,Daochuan Jiang,Zijun Sun,Dapeng Lu,Pingwu Du

DOI: https://doi.org/10.1039/c6dt02148d

IF: 4

2016-01-01

Dalton Transactions

Abstract:A noble-metal-free photocatalytic hydrogen production system containing a simple bidentate cobalt Schiff base complex as the molecular cocatalyst, CdS nanorods as the photosensitizer, and ascorbic acid as the electron donor is reported in this paper.
Synthesis and Visible‐Light Photocatalytic Performance of Cadmium Sulfide and Oxide Hexagonal Nanoplates

Di Lang,Fan Liu,Guohong Qiu,Xionghan Feng,Quanjun Xiang

DOI: https://doi.org/10.1002/cplu.201402220

2014-01-01

ChemPlusChem

Abstract:Cadmium sulfide and oxide hexagonal nanoplates were prepared by a facile ion-exchange strategy and crystal transformation process by using morphology-analogous cadmium oxyhydroxide as a precursor. The precursors of uniform Cd(OH)(2) hexagonal nanoplates was first synthesized by a simple ethylenediaminetetraacetic acid disodium salt assisted hydrothermal method. Then, through ion-exchange reactions of the as-prepared Cd(OH)(2) precursors with S2- anions, cubic-phase CdS was formed immediately on the surface of Cd(OH)(2) nanoplates. The above intermediates could be further completely converted into CdS and CdO nanoplates without morphology changes through thermal treatment at 280 degrees C for 4h under a sulfur atmosphere and under air, respectively. The photocatalytic activity of all samples was evaluated by the photocatalytic decolorization of an aqueous solution of methylene blue and photocatalytic hydrogen production under visible-light irradiation. The results show that the CdS hexagonal nanoplates exhibit high visible-light photocatalytic degradation properties and photocatalytic hydrogen production activity. The enhanced visible-light photocatalytic activity can be related to several factors, including a suitable band gap, phase structure, and morphology of the hexagonal nanoplates.
WS 2 /Graphitic Carbon Nitride Heterojunction Nanosheets Decorated with CdS Quantum Dots for Photocatalytic Hydrogen Production.

Yajun Zou,Jian-Wen Shi,Dandan Ma,Zhaoyang Fan,Linhao Cheng,Diankun Sun,Zeyan Wang,Chunming Niu

DOI: https://doi.org/10.1002/cssc.201800053

IF: 8.4

2018-01-01

ChemSusChem

Abstract:Two-dimensional/two-dimensional (2D/2D) stacking heterostructures are highly desirable in fabricating efficient photocatalysts because face-to-face contact can provide a maximized interfacial region between the two semiconductors; this largely facilitates the migration of charge carriers. Herein, a WS2/graphitic carbon nitride (CN) 2D/2D nanosheet heterostructure decorated with CdS quantum dots (QDs) has been designed, for the first time. Optimized CdS/WS2/CN without another cocatalyst exhibits a significantly enhanced photocatalytic H-2 evolution rate of 1174.5 mu molh(-1)g(-1) under visible-light irradiation (lambda > 420 nm), which is nearly 67 times higher than that of the pure CN nanosheets. The improved photocatalytic activity can be primarily attributed to the highly efficient charge-transfer pathways built among the three components, which effectively accelerate the separation and transfer of photogenerated electrons and holes, and thus, inhibit their recombination. Moreover, the extended light-absorption range also contributes to excellent photocatalytic efficiency. In addition, the CdS/WS2/CN photocatalyst shows excellent stability and reusability without apparent decay in the photocatalytic H-2 evolution within 4 cycles in 20 h. It is believed that this work may shed light on specifically designed 2D/2D nanosheet heterostructures for more efficient visible-light-driven photocatalysts.
Self-constructed Facet Junctions on Hexagonal CdS Single Crystals with High Photoactivity and Photostability for Water Splitting

Xuqiang Hao,Yue Hu,Zhiwei Cui,Jun Zhou,Ying Wang,Zhigang Zou

DOI: https://doi.org/10.1016/j.apcatb.2018.12.006

2019-01-01

Abstract:Crystal facets engineering of semiconductor catalysts with different exposed facets has been proven as a versatile approach to enhance their photocatalytic performance. Herein, for the first time, a facet junction engineered hexagonal CdS single crystal with exposing {0001} and {10 (1) over bar0} facets was synthesized by hydrothermal reaction via adjusting the molar ratio of S2-/Cd2+ precursor. The co-exposed {0001} and {10 (1) over bar0} facets on hexagonal CdS single crystals with continuous band bending and well-defined epitaxial interfaces showed highly efficient visible-light-induced H-2 evolution. The maximum photocatalytic H-2 production rate of 24.33 mmol h(-1) g(-1) is obtained over the facet-junction engineered hexagonal CdS-5 single crystals with an apparent quantum efficiency of 11.18% at 470 nm, which is about 5.27 times greater than CdS-1 nanoparticles. Also, superior photostability is also achieved, even after 25 consecutive cycles during 100 h light irradiation keeping impregnated in strong alkaline sacrificial agent beyond 20 days, the initial photoactivity is still remained. The enhanced photocatalytic H2 evolution activity and photostability can be ascribed to the type-II band alignment between the co-exposed {0001} and {10 (1) over bar0} facets that significantly promoted the separation rate of photo-generated electrons and holes. And the small amount of sulfur vacancies are also benefit for the photocatalytic hydrogen evolution activity of CdS-5. The time-resolved fluorescence (TRPL) decay and photoelectrochemical test further proved the effective spatial charge separation. This work provides a feasible and simple strategy for designing of facet-junction engineered CdS single crystals with highly efficient photocatalytic activity and unprecedented photostability.
Direct Observation of Z-Scheme Route in Cu31S16/ZnxCd1-xS Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution

Zichao Lian,Minghan Qu,Han Xiao,Lihui Wang,Hanxiang Wu,Jiangzhi Zi,Wei Wang,Hexing Li

DOI: https://doi.org/10.1002/smll.202400611

IF: 13.3

Small

Abstract:Although photocatalytic hydrogen production from water holds great potential as a renewable and sustainable energy alternative, the practical application of the technology demands cost-effective, simple photocatalytic systems with high efficiency in hydrogen evolution reaction (HER). Herein, the synthesis and characterization of Cu31S16/ZnxCd1-xS heterostructured nanoplates (Cu31S16/ZnCdS HNPs) as a high photocatalytic system are reported. The cost-effective, hierarchical structures are easily prepared using the Cu31S16 NPs as the seed by the epitaxial growth of the ZnCdS nanocrystals (NCs). The Cu31S16/ZnCdS without the noble metal cocatalyst exhibits a high HER rate of 61.7 mmol g-1 h-1, which is 8,014 and 17 times higher than that of Cu31S16 and ZnCdS, respectively, under visible light irradiation. The apparent quantum yield (AQY) of Cu31S16/ZnCdS reaches 67.9% at 400 nm with the highest value so far in the reported ZnCdS-based photocatalysts. The excellent activity and stability of the Cu31S16/ZnCdS are attributed to the formation of a strong internal electric field (IEF) and the Z-scheme pathway. The comprehensive experiments and theoretical calculations provide the direct evidences of the Z-scheme route. This work may offer a way for the design and development of efficient photocatalysts to achieve solar-to-chemical energy conversion at a practically useful level.
Prickly Ni3S2 Nanowires Modified CdS Nanoparticles for Highly Enhanced Visible-Light Photocatalytic H2 Production

Zhongli Li,Xiaoping Chen,Wenfeng Shangguan,Yanjie Su,Yijian Liu,Xinwei Dong,Poonam Sharma,Yafei Zhang

DOI: https://doi.org/10.1016/j.ijhydene.2016.12.047

IF: 7.2

2017-01-01

International Journal of Hydrogen Energy

Abstract:The photocatalytic water splitting strategy is one of the most promising ways to achieve clean and renewable solar-to-hydrogen energy conversion. In this study, a highly enhanced photocatalytic H-2 production system has been achieved, using CdS nanoparticles (NPs) decorated on prickly Ni3S2 nanowires (NWs) as the light-driven photocatalyst. The photocatalyst was prepared by a co-precipitated method in which spiky Ni NWs were employed as starting material for prickly Ni3S2 NWs. Characterization analysis (XRD, TEM, XPS, etc.) show the high purity of Ni3S2/CdS hybrid structures and the well deposition of CdS NPs on prickly Ni3S2 NWs. Besides, the as synthesized Ni3S2/CdS photocatalyst exhibit reduced photoluminescence peak intensity, which means the Ni3S2 NWs functions as electron collector and transporter to quench the photoluminescence of CdS. This prickly Ni3S2/CdS nanocomposite demonstrates a 70 times higher H-2 production rate than that of pure CdS and a quantum efficiency of 12.3% at the wavelength of 400 nm in the absence of noble metals. This enhanced H-2 production activity is better than the one of CdS loaded with 0.5 wt% Pt. Our findings highlight the potential application of Ni3S2/CdS hybrid structures for visible light photocatalytic hydrogen yielding in the energy conversion field. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
A Cocatalyst-Free CdS Nanorod/zns Nanoparticle Composite for High-Performance Visible-Light-driven Hydrogen Production from Water

Daochuan Jiang,Zijun Sun,Hongxing Jia,Dapeng Lu,Pingwu Du

DOI: https://doi.org/10.1039/c5ta07420g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Highly efficient, visible-light-induced hydrogen (H2) production via water splitting can be achieved without the help of a cocatalyst by using a noble-metal-free core–shell photocatalyst, in which zinc sulfide (ZnS) nanoparticles are anchored on cadmium sulfide nanorods (CdS NRs).
Porous CoxP Nanosheets Decorated Mn0.35Cd0.65S Nanoparticles for Highly Enhanced Noble-Metal-free Photocatalytic H2 Generation

Xianglong He,Deqian Zeng,Yimin Liu,Qian Chen,Jingren Yang,Runchen Gao,Toyohisa Fujita,Yuezhou Wei

DOI: https://doi.org/10.1016/j.jcis.2022.06.102

IF: 9.9

2022-01-01

Journal of Colloid and Interface Science

Abstract:Incorporating 2D transition-metal phosphides into visible-light-driven semiconductors is fascinating for advancing novel photocatalysts. In this paper, porous CoxP nanosheets prepared by phosphating Co(OH)(2) nanosheets are coupled with Mn0.35Cd0.65S nanoparticles for significantly boosted photocatalytic H-2 evolution performance. The optimal CoxP/Mn0.35Cd0.65S hybrids show an excellent visible-light H-2 production rate of 7188.9 lmol g(-1)h(-1) upon visible light with an apparent quantum yield (AQY) of 18.9% at 420 nm. The H-2 production rate of the 5% CoxP/Mn0.35Cd0.65S sample is about 257 times bare CdS and even 18 times higher than pristine Mn0.35Cd0.65S. This dramatic photocatalytic H-2 generation activity is mainly ascribed to the efficient charge transfer and abundant active sites by introducing the porous CoxP nanosheets. The photocatalytic mechanism of the CoxP/Mn0.35Cd0.65S composites is investigated by the photoluminescence (PL), time-resolved photoluminescence (TRPL), electrochemical, and photoelectrochemical (PEC) tests. This work presents a viable strategy to design a 2D/0D hybrid system containing porous cobalt phosphides nanosheets and MnCdS solid solutions for noble-metal-free photocatalytic application. (C) 2022 Elsevier Inc. All rights reserved.
Noble-metal-free bimetallic nitride decorated CdS nanorods for photocatalytic hydrogen generation

Lu Chen,Yuzhou Xia,Jiale Shi,Xiaohui Huang,Xiyao Liu,Guiyang Yan,Renkun Huang

DOI: https://doi.org/10.1039/d4ce00216d

IF: 3.756

2024-01-01

CrystEngComm

Abstract:The Ni 3 FeN/CdS photocatalyst exhibits a remarkable photocatalytic hydrogen production rate of 4.6 mmol g −1 h −1 , which is 23.8 times higher than that of pristine CdS. Its apparent quantum efficiency is 13.5% at 420 nm.

chemistry, multidisciplinary,crystallography
Core–shell Amorphous Cobalt Phosphide/cadmium Sulfide Semiconductor Nanorods for Exceptional Photocatalytic Hydrogen Production under Visible Light

Zijun Sun,Bihu Lv,Jingshi Li,Min Xiao,Xiaoyong Wang,Pingwu Du

DOI: https://doi.org/10.1039/c5ta07561k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:We report that a photocatalyst made of amorphous cobalt phosphide (CoPx) integrated with CdS NRs for H2 production under visible light. The CoPx/CdS NRs gave an apparent quantum yield at ∼35% (λ = 450 nm).
S-scheme heterostructure based on ultrathin 2D CdS coated W18O49 nanosheets-assembled network for highly-efficient photocatalytic H2 evolution

Ya Xiong,Teng Liu,Xinyu Wang,Wendi Liu,Yanjun Xue,Xiaoli Zhang,Can Xiong,Jian Tian

DOI: https://doi.org/10.1016/j.jallcom.2022.165652

IF: 6.2

2022-10-15

Journal of Alloys and Compounds

Abstract:Ultrathin CdS nanosheets (NSs) are intriguing in photocatalytic hydrogen evolution. Severe photo-corrosion and rapid recombination of electrons and holes, however, impair their applications. To solve this problem, a novel step-scheme (S-scheme) 2D CdS/W18O49 heterostructure with strong interfacial interactions and large contact interface has been successfully designed. Due to the ultrathin structure of CdS, defect-rich W18O49 NSs-assembled network, unique 2D heterostructure and state-of-the-art S-scheme mode, 40 wt% CdS/W18O49 (CW40) shows a prominent photocatalytic H2 production rate of 15.4 mmol g−1 h−1. Besides, the apparent quantum efficiency of CW40 is up to 15.4 % under light at λ = 370 nm. Besides, the as-prepared CW40 can protect CdS from photo-corrosion, exhibiting outstanding stability over 24 h circular reaction. Our work provides an out-of-box solution to broaden the application potential of certain catalysts with inherent drawbacks and offers fresh insight into the design and preparation of highly-efficient 2D heterostructures for versatile applications.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
CdS-Cu1.81S heteronanorods with continuous sublattice for photocatalytic hydrogen production

Sheng Liu,Xueyi Guo,Weijia Wang,Ying Yang,Congtan Zhu,Chongyao Li,Weihuang Lin,Qinghua Tian,Yong Liu

DOI: https://doi.org/10.1016/j.apcatb.2021.120909

2022-04-01

Abstract:Photocatalytic hydrogen (H2) production is a cascade reaction that involves multiple limiting steps, such as light-harvesting, charge separation and transfer, redox reaction rate, and so on. Thus, there is a need to optimize each reaction node to promote the photocatalytic H2 production efficiency for the commercial application of sustainable energy. Herein, we report integrally designed CdS-Cu1.81S heteronanorods (HNRs) for photocatalytic H2 production driven by near-infrared to ultraviolet irradiation. The intraparticle p-n junction and the well-constructed heterointerface result in highly efficient charge separation and transfer between the heterogeneous domains. Further adjusting the redox reaction sites on the surface of CdS-Cu1.81S HNRs leads to a high photocatalytic H2 production rate of 2.714 mmol·h−1·g−1, representing 150-fold and 108-fold improvements compared with pristine Cu1.81S and CdS nanorods (NRs), respectively. Our work provides an alternative entry point for boosting the performance of noble-metal-free photocatalyst and highlights the importance of synergetic design.

chemistry, physical,engineering, chemical, environmental
Noble-metal-free CuS/CdS photocatalyst for efficient visible-light-driven photocatalytic H 2 production from water

Fan Zhang,Hua-Qiang Zhuang,Wenming Zhang,Jun Yin,Fu-Hu Cao,Yun-xiang Pan

DOI: https://doi.org/10.1016/j.cattod.2018.03.060

IF: 5.3

2019-01-01

Catalysis Today

Abstract:•CuS promoted the separation of the photogenerated electron-hole pairs.•CuS was an excellent noble-metal-free cocatalysts for photocatalysis.•CuS triggered an enhanced photocatalytic H2 evolution from H2O than the noble metals.
Constructing Direct Z‐Scheme Heterostructure by Enwrapping ZnIn2S4 on CdS Hollow Cube for Efficient Photocatalytic H2 Generation

Chuan‐Qi Li,Xin Du,Shan Jiang,Yan Liu,Zhu‐Lin Niu,Zhong‐Yi Liu,Sha‐Sha Yi,Xin‐Zheng Yue

DOI: https://doi.org/10.1002/advs.202201773

IF: 15.1

2022-06-30

Advanced Science

Abstract:The stable composite photocatalyst integrated by ultrathin ZnIn2S4 nanosheets on surface of hollow CdS exhibits outstanding visible‐light‐driven photocatalytic H2 generation activity, due to that: i) the Z‐scheme charge transfer route facilitates charge separation, prolongs carrier lifetimes, and remains strong electron reduction capacity; ii) the unique cube‐in‐cube structure brings abundant active sites, improves light harvesting ability, shortens charge transfer distance. Rational design hybrid nanostructure photocatalysts with efficient charge separation and transfer, and good solar light harvesting ability have critical significance for achieving high solar‐to‐chemical conversion efficiency. Here a highly active and stable composite photocatalyst is reported by integrating ultrathin ZnIn2S4 nanosheets on surface of hollow CdS cube to form the cube‐in‐cube structure. Experimental results combined with density functional theory calculations confirm that the Z‐scheme ZnIn2S4/CdS heterojunction is formed, which highly boosts the charge separation and transfer under the local‐electric‐field at semiconductor/semiconductor interface, and thus prolongs their lifetimes. Moreover, such a structure affords the highly enhanced light‐harvesting property. The optimized ZnIn2S4/CdS nanohybrids exhibit superior H2 generation rate under visible‐light irradiation (λ ≥ 420 nm) with excellent photochemical stability during 20 h continuous operation.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry

Noble-metal-free hexagonal wurtzite CdS nanoplates with exposed (110) and (112) crystal facets for efficient visible-light H 2 production

Construction of Sugar-Gourd-shaped CdS/Co1-xS Hollow Hetero-Nanostructure As an Efficient Z-scheme Photocatalyst for Hydrogen Generation

A Noble‐Metal‐Free CdS/Ni3S2@C Nanocomposite for Efficient Visible‐Light‐Driven Photocatalysis

Bare Cd1-Xznxs Zb/Wz Heterophase Nanojunctions for Visible Light Photocatalytic Hydrogen Production with High Efficiency

Defected tungsten disulfide decorated CdS nanorods with covalent heterointerfaces for boosted photocatalytic H2 generation

Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible-Light-Driven Photocatalytic Oxygen Production.

Single Crystalline Quaternary Sulfide Nanobelts for Efficient Solar-to-hydrogen Conversion

Enhanced Photocatalytic H2 Production on CdS Nanorods with Simple Molecular Bidentate Cobalt Complexes As Cocatalysts under Visible Light.

Synthesis and Visible‐Light Photocatalytic Performance of Cadmium Sulfide and Oxide Hexagonal Nanoplates

WS 2 /Graphitic Carbon Nitride Heterojunction Nanosheets Decorated with CdS Quantum Dots for Photocatalytic Hydrogen Production.

Self-constructed Facet Junctions on Hexagonal CdS Single Crystals with High Photoactivity and Photostability for Water Splitting

Direct Observation of Z-Scheme Route in Cu31S16/ZnxCd1-xS Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution

Prickly Ni3S2 Nanowires Modified CdS Nanoparticles for Highly Enhanced Visible-Light Photocatalytic H2 Production

A Cocatalyst-Free CdS Nanorod/zns Nanoparticle Composite for High-Performance Visible-Light-driven Hydrogen Production from Water

Porous CoxP Nanosheets Decorated Mn0.35Cd0.65S Nanoparticles for Highly Enhanced Noble-Metal-free Photocatalytic H2 Generation

Noble-metal-free bimetallic nitride decorated CdS nanorods for photocatalytic hydrogen generation

Core–shell Amorphous Cobalt Phosphide/cadmium Sulfide Semiconductor Nanorods for Exceptional Photocatalytic Hydrogen Production under Visible Light

S-scheme heterostructure based on ultrathin 2D CdS coated W18O49 nanosheets-assembled network for highly-efficient photocatalytic H2 evolution

CdS-Cu1.81S heteronanorods with continuous sublattice for photocatalytic hydrogen production

Noble-metal-free CuS/CdS photocatalyst for efficient visible-light-driven photocatalytic H 2 production from water

Constructing Direct Z‐Scheme Heterostructure by Enwrapping ZnIn2S4 on CdS Hollow Cube for Efficient Photocatalytic H2 Generation