Gallium-based liquid metal hybridizing MoS 2 nanosheets with reversible rheological characteristics and enhanced lubrication properties

Xing Li,Ruizhi Wang,Jiaqian Li,Guangneng Dong,Qinghua Song,Bing Wang,Zhanqiang Liu

DOI: https://doi.org/10.1039/d3ra02297h

IF: 4.036

2023-01-01

RSC Advances

Abstract:Gallium-based liquid metal (GLM) is a promising lubricant candidate due to its high load capacity and high thermal stability.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Gallium-based Liquid Metal Hybridizing MoS2 Nanosheets with Reversible Rheological Characteristics and Enhanced Lubrication Properties.

Xing Li,Ruizhi Wang,Jiaqian Li,Guangneng Dong,Qinghua Song,Bing Wang,Zhanqiang Liu

DOI: https://doi.org/10.1039/d3ra02297h

IF: 4.036

2023-01-01

RSC Advances

Abstract:Gallium-based liquid metal (GLM) is a promising lubricant candidate due to its high load capacity and high thermal stability. However, the lubrication performance of GLM is restricted by its metallic characteristics. Herein, this work proposes a facile method to obtain a GLM@MoS2 composite by integrating GLM with MoS2 nanosheets. The incorporation of MoS2 imparts GLM with different rheological properties. Since GLM is able to be separated from the GLM@MoS2 composite and agglomerates into bulk liquid metal again in alkaline solution, the bonding between GLM and MoS2 nanosheets is reversible. Moreover, our frictional tests demonstrate that the GLM@MoS2 composite exhibits enhanced tribological performance including reduction of friction coefficient and wear rate by 46% and 89%, respectively, in contrast to the pure GLM.
Magnetically Responsive Gallium-Based Liquid Metal: Preparation, Property and Application.

Yifeng Shen,Dongdong Jin,Tiefeng Li,Xuxu Yang,Xing Ma

DOI: https://doi.org/10.1021/acsnano.4c07051

IF: 17.1

2024-01-01

ACS Nano

Abstract:Magnetically responsive soft smart materials have garnered significant academic attention due to their flexibility, remote controllability, and reconfigurability. However, traditional soft materials used in the construction of these magnetically responsive systems typically exhibit low density and poor thermal and electrical conductivities. These limitations result in suboptimal performance in applications such as medical radiography, high-performance electronic devices, and thermal management. To address these challenges, magnetically responsive gallium-based liquid metals have emerged as promising alternatives. In this review, we summarize the methodologies for achieving magnetically responsive liquid metals, including the integration of magnetic agents into the liquid metal matrix and the utilization of induced Lorentz forces. We then provide a comprehensive discussion of the key physicochemical properties of these materials and the factors influencing them. Additionally, we explore the advanced and potential applications of magnetically responsive liquid metals. Finally, we discuss the current challenges in this field and present an outlook on future developments and research directions.
The lubrication regimes and transition laws of gallium liquid-metal

Jie Guo,Yanxin Si,Qiang Liu,Xinjian Cao,Jun Cheng,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2023.108838

IF: 5.62

2023-08-02

Tribology International

Abstract:Gallium-based liquid metal is a novel lubricant for high-end equipment due to its low friction coefficient and excellent load-carrying capacity. In this work, the stribeck curve, static friction and a series of fixed-speed friction tests for steel self-mated pairs under gallium lubrication are conducted to reveal the lubrication regimes and transition laws. In the sliding speed ranging from 10 −8 to 1.4 m/s and the normal load ranging from 2 to 20 N, gallium can only provide boundary and mixed lubrication. Uniformly distributed or island-like distributed gallium-rich films are formed under boundary or mixed lubrication regimes, respectively. The different formation mechanisms are revealed. The failure of the gallium-rich film is mainly related to the average contact stress of the frictional interfaces.

engineering, mechanical
Enhanced Lubrication Effect of Gallium-Based Liquid Metal with Laser Textured Surface

Xing Li,Yihong Li,Zhe Tong,Qiang Ma,Yuquan Ni,Guangneng Dong

DOI: https://doi.org/10.1016/j.triboint.2018.08.037

IF: 5.62

2019-01-01

Tribology International

Abstract:Gallium-based liquid metals which hold high thermal stability and conductivity are promising lubricant candidates for harsh environment. In this study, the lubrication behaviours of Ga76In24 (LM) were investigated for steel/steel contact under different contact stresses and sliding speeds. Surface texturing technique was proposed to enhance the lubrication behaviours of LM. Textured surfaces with different area ratios were fabricated by nanosecond laser texturing and characterized by scanning electron microscope and laser scanning confocal microscope. Tribological results demonstrate that applied load as well as sliding frequency can influence the LM's lubrication behaviours and that textured surface can improve LM's anti-friction and anti-wear abilities. Moreover, the relative lubrication mechanisms for untextured and textured surfaces are discussed.
Improving the Wettability and Lubrication Properties of Gallium-Based Liquid Metal Through the Reaction Adsorption of Copper and Gallium

Qiang Liu,Jie Guo,Zhibo Liu,Jun Cheng,Shengyu Zhu,Rengen Xu,Xinjian Cao,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2024.110338

IF: 5.62

2025-01-01

Tribology International

Abstract:Gallium-based liquid metal (GLM) is a promising lubricant used in extreme working conditions. In this paper, a copper-containing friction pair (316L-10Cu) is prepared, and the wettability and lubrication properties of GLM are improved by the reaction adsorption of copper and gallium. Compared with 316 L, the contact angle of GLM on 316L-10Cu surface decreases from 153 degrees to 124 degrees. At sliding speeds of 0.01 m/s (boundary lubrication) and 0.05 m/s (mixed lubrication), the friction coefficients of Si3N4/316L-10Cu decreases by 48.5 % and 24.6 % compared to Si3N4/316 L, and the wear rates decreases by 86.5 % and 80.7 %. The improved lubrication performance is attributed to copper doping promoting the adsorption of gallium on the frictional interfaces, and better wetting enhancing the hydrodynamic pressure effect of GLM.
Elastohydrodynamic lubrication behaviors and mechanisms of gallium-based liquid metal/polydimethylsiloxane composite lubricant

Yanxin Si,Qiang Liu,Xinjian Cao,Jie Guo,Jun Cheng,Shengyu Zhu,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2024.109436

IF: 5.62

2024-05-01

Tribology International

Abstract:Gallium-based liquid metal (GLM) has excellent extreme-pressure properties, but at low sliding speeds, it is typically in a boundary or mixed lubrication, causing poorer properties compared to traditional lubricants. In this paper, GLM/P composite lubricants composed of GLM particles and polydimethylsiloxane are prepared. Under a maximum-Hertz-stress of 0.69 GPa, GLM/P2–30% (viscosity of 1260 mPa∙s) can enter the elastohydrodynamic lubrication (EHL) regime at 0.2 m/s, has good EHL properties (friction coefficient of 0.06, wear rate in the order of 10−9 mm3/N·m). Meanwhile, it has high extreme-pressure properties (PB of 2300 N). The EHL film is formed mainly by polydimethylsiloxane, while GLM particles increase the thermal conductivity of lubricant and can be adsorbed on the frictional interfaces, thereby improving the EHL properties.

engineering, mechanical
Ga-based Liquid Metal: A Novel Current-Carrying Lubricant

Jie Guo,Jun Cheng,Hui Tan,Shengyu Zhu,Zhuhui Qiao,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2019.03.039

IF: 5.62

2019-01-01

Tribology International

Abstract:Ga-based liquid metal (GLM) may be a promising current-carrying lubricant due to its excellent conductivity and good lubricity. But the lubrication mechanism of GLM under current-carrying condition is unclear. This paper attempts to investigate the feasibility of GLM as a current-carrying lubricant at atmosphere and room temperature (RT, similar to 26 degrees C). It is found that GLM can effectively lubricate the metal sliding-pairs, and can further dramatically reduce the wear rate in current-carrying condition. The current promotes the adsorption of Ga on the counterpart connected to the cathode and inhibits the oxidation of Ga on both sliding-pairs. The present finding provides a technical supporting for the application of GLM used as a current-carrying lubricant, and enriches the lubrication science of liquid lubricants.
Enhanced extreme pressure lubrication performance and load carrying capability of gallium-based liquid metal reinforced with MoSe2 and WSe2 nanoparticles

Shicheng Yan,Shicheng Yan,Yuan Chen,Yuan Chen,Yahong Xue,Yahong Xue,Haotian Zhang,Haotian Zhang,Zhichao Xin,Zhichao Xin

DOI: https://doi.org/10.1016/j.triboint.2023.108414

IF: 5.62

2023-05-01

Tribology International

Abstract:Ga-In-Sn liquid metal containing MoSe2 and WSe2 nanoparticles was prepared via the mechanical blending technology, and their extreme pressure lubricating behaviors were studied on a high-frequency linear-oscillation tribometer. The blending of nanoparticles and Ga-In-Sn is reversible, and the viscosity of liquid metal is increased with the content of nanoparticles. The introduction of MoSe2 and WSe2 nanoparticles makes the load-bearing capacity of liquid metal increase (exceeding 2000 N) as compared with that of Ga-In-Sn (1600 N). Among these liquid metal lubricants, the 3.0 wt% WSe2/Ga-In-Sn exhibits the best lubricating ability (0.112) and anti-wear property (4.17 ×10−8 mm3/Nm). The improvement of extreme pressure lubrication performance of liquid metal benefits from tribo-films with various nanocrystals, which avoids the adhesive wear and seizure failure of tribo-pairs.

engineering, mechanical
Lubrication Properties of Gallium-Based Liquid Metals by Doping Bismuth

Rongzhen Xiao,Mingjun Yao,Jun Cheng,Jie Guo,Juanjuan Chen,Jiao Chen,Shengyu Zhu,Jun Yang

DOI: https://doi.org/10.1016/j.triboint.2024.109653

IF: 5.62

2024-01-01

Tribology International

Abstract:Ga-based liquid metal (GLM) is a promising high temperature lubricant but its lubricating properties still need to be further improved. In this work, the lubrication properties of bismuth doped Ga-base liquid metal in a vacuum environment were studied in a wide temperature range from room temperature (RT) to 600 °C, where the self-mated Inconel 625 alloy sliding-pairs were selected. The results indicate that the addition of a small amount of bismuth (0.5wt. %) in GLM can enhance its lubricating performance by suppressing the oxidation of gallium within the temperature range of 200 °C to 600 °C, thereby decreasing the wear of Inconel 625 alloy.
Liquid Metal Hydrothermal Rheological Modification Method for High Performance Gallium‐Coated Carbon Microparticle Composites

Xiao‐Ping Zhou,Zheng Luo,Dong‐Xu Yang

DOI: https://doi.org/10.1002/admt.202400737

IF: 6.8

2024-08-15

Advanced Materials Technologies

Abstract:The LM hydrothermal rheological modification method is proposed to synthesize Ga‐coated carbon microparticles, and the highly miscible rheological modification of LM is realized by mixing LM and Ga‐coated carbon microparticles. Including carbon microparticles in the LM improves the mechanical strength of the composite, thereby overcoming the limitation of the LM that has a low mechanical strength. Gallium‐based liquid metal (LM) is widely used in flexible electronics, optics, and green synthesis due to its excellent conductivity, flexibility, and self‐healing capabilities. However, LM's inherent fluidity and high surface tension greatly limit their practical applications. Therefore, there is a strong demand for developing LM composites that are easy to control and exhibit outstanding performance when used flexibly. In this work, the LM hydrothermal rheological modification method is proposed to synthesize Ga‐coated carbon microparticles, and the highly miscible rheological modification of LM is realized by mixing LM and Ga‐coated carbon microparticles. Including carbon microparticles in the LM improves the mechanical strength of the composite, thereby overcoming the limitation of the LM that has a low mechanical strength. By controlling the volume fraction of carbon microparticles in LM, electrical conductivity is increased by 30% and thermal conductivity by more than 2.0 times that of pure LM. In addition, the fundamental interfacial wetting behavior is demonstrated at the interface of LM and Ga2O3, and the rheological modification mechanism of LM is explained by carbon particles. This work presents a novel method for preparing high‐performance polymer materials and discusses their broad potential applications in thermal interface materials, wireless energy transfer, and flexible electronics.

materials science, multidisciplinary
Lubricating Behavior of Gallium-Based Liquid Metal for Cu/Al Tribo-Pair

Jiqiang Ma,Xuhu Zhang,Jie Guo,Hui Tan,Jun Cheng,Shengyu Zhu,Jun Yang

DOI: https://doi.org/10.1016/j.triboint.2024.110090

IF: 5.62

2024-01-01

Tribology International

Abstract:Gallium-based liquid metal (GLM) is an emerging lubricant because of low melting point, good fluidity and thermal stability, high thermal conductivity and electrical conductivity. This work investigates the tribological behavior of GLM for Cu/Al tribo-pair. It is found that with GLM lubrication, the friction coefficient of the Cu/Al tribo-pair is reduced by approximately 1.5 to 3 times, and the wear rate of the Cu alloy is also reduced by about 4 to 16 times, compared to dry friction. Furthermore, under high-speed and high-load conditions, the lubrication effect of GLM for the Cu/Al tribo-pair is particularly prominent. GLM provided fluid lubrication for the Cu/Al tribo-pair, and the formation of a gallium-aluminum metal film on the worn surface effectively prevents the direct contact of tribo-pair, thereby reducing friction and wear.
Improving Tribological Behaviors of Gallium-Based Liquid Metal by H-Bn Nano-Additive

Xing Li,Penghao Qi,Qi Liu,Guangneng Dong

DOI: https://doi.org/10.1016/j.wear.2021.203852

IF: 4.695

2021-01-01

Wear

Abstract:Gallium-based liquid metal is a potential lubricant on account of its high load capacity and thermal stability. However, the lubrication performance of gallium-based liquid metal (LM) is limited by its metallic characteristics. In this work, hexagonal boron nitride (h-BN) nanosheet with good lubricity is utilized as additive to enhance lubrication behaviors of LM. The bonding between LM and h-BN particles is reversible. In alkaline solution, LM is able to be separated from h-BN particles and agglomerate to bulk liquid metal. Moreover, our frictional tests demonstrate that when using h-BN as additive in LM, it holds enhanced tribological performance including reduction of the friction coefficient and wear rate in contrast to the pure LM. Moreover, the study of the lubrication mechanisms suggests that the adhesion of LM and deposition of h-BN are the critical factors for improving lubricity. This work proposed a facile method to improve the tribological behaviours of LM and promoted the understanding of the lubricating principles of LM and h-BN.
Improved lubrication and wear resistance of gallium-matrix liquid metal containing molybdenum diselenide nanoparticles under heavy load conditions

Shicheng Yan,Zhichao Xin,Yahong Xue,Haotian Zhang

DOI: https://doi.org/10.1016/j.wear.2023.204987

IF: 4.695

2023-05-25

Wear

Abstract:Owing to their advantages of high load-carrying performance, efficient heat conduction, and low friction coefficient, liquid metal-lubricated spiral groove bearings are critical mechanical components in high-speed mechanical support systems including computed tomography X-ray tubes, machine spindles of multi-axis numerical control machining center, etc. Therefore, it is imperative to understand the tribological mechanisms between liquid metal lubricants and tribo-pairs aiming to improve their functional properties and extend the service life of spiral groove bearings. In this study, molybdenum diselenide (MoSe 2 ) nanoparticles, a friction-reducing lubricant, were blended as an additive into the gallium-based liquid metal (LM, Ga 64 In 24 Sn 12 ) using mechanical grinding techniques. Following lubrication with MoSe 2 /Ga 64 In 24 Sn 12 LM lubricant, friction and wear characteristics of Si 3 N 4 ceramics ball/AISI 52100 steel disk friction pairs were evaluated by a high-frequency linear reciprocating oscillation friction test machine with ball-on-disc configuration under a normal load ranging from 50 N to 1500 N. Experimental results demonstrate that as the MoSe 2 dosage increases, the viscosity of MoSe 2 /Ga 64 In 24 Sn 12 LM lubricant gradually rises. Both normal load and MoSe 2 nanoparticles content have a notable influence on the lubrication properties of MoSe 2 /Ga 64 In 24 Sn 12 LM lubricant at a light (50 N) or a heavy load (1500 N). Of all these LM lubricants, the best lubrication performance and wear resistance ( f = 0.10, k = 1.93×10 −8 mm 3 /Nm) was achieved for 5.0 wt% MoSe 2 /Ga 64 In 24 Sn 12 . The improvement in the lubrication characteristics of MoSe 2 /Ga 64 In 24 Sn 12 LM lubricant under heavy load conditions originated from the generation of tribo-films from the Tribo-chemical reactions involving MoSe 2 nanoparticles. The thickness of Ga-based tribo-films is 1.50 ± 0.10 μm. This kind of tribo-films is rich in various nanocrystals consisting of orthorhombic α -Fe 2 O 3 , monoclinic β -Ga 2 O 3 , cubic In 2 O 3 , tetragonal rutile SnO 2 , orthorhombic α -MoO 3, and noncrystalline SiO 2 . Friction-induced lubricating films prevent adhesion wear of frictional pairs at heavy loads and consequently increase the load-bearing characteristics of LM lubricant, thereby improving the lubrication characteristics of LM.

engineering, mechanical,materials science, multidisciplinary
Ga-based Liquid Metal with Good Self-Lubricity and High Load-Carrying Capacity

Jun Cheng,Yuan Yu,Jie Guo,Shuai Wang,Shengyu Zhu,Qian Ye,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2018.08.003

IF: 5.62

2019-01-01

Tribology International

Abstract:Extreme pressure lubrication is a great challenge for many mechanical systems like bearings and gears. Here, an novel functional material based on Ga-based liquid metal has been applied to successfully lubricate the steel ceramic sliding pairs at extreme high load (1500 N), which significantly outperforms other liquid lubricants like oil and ionic liquid. Ga-based liquid metal provides a low friction coefficient (0.11-0.23) and wear rate (10(-8)-10(-7) mm(3)/Nm) of AISI 52100 steel disc (C0.98-1.10Mn0.25-0.45P <= 0.025S <= 0.025Si0.15-0.30Cr1.30-1.60Fe96.5-97.32, mass %; American Iron and Steel Institute standard) when it slides against Si3N4 balls over a load range 100-1500 N. To elucidating these interesting results, the lubrication mechanisms of Ga-based liquid metal are studied by tribo-surface analysis.
Zwitterionic microgel-functionalized gallium-based liquid-metal nanodroplets as aqueous lubricant additives

Baoluo He,Peng Wang,Qi Lu,Yixuan Du,Shujuan Liu,Qian Ye,Feng Zhou,Weimin Liu

DOI: https://doi.org/10.1016/j.triboint.2022.107952

IF: 5.62

2023-01-01

Tribology International

Abstract:Herein, a bioinspired molecule-dopamine n-butenylamide-was self-assembled on Gallium-based liquid metal (GLM) nanodroplets to introduce vinyl group, and the zwitterionic poly (2-methylacryloxyethyl phosphocholine) (PMPC) was grafted onto GLM nanodroplets via surface-initiated free radical polymerization to obtain hybrid PMPC-GLM microgel. The as-prepared PMPC-GLM microgel has good dispersion stability in aqueous solution (chemical stability > 2 months), and shows excellent antibacterial properties due to the hydration of PMPC and antibacterial effect of Ga3+. Moreover, the hydration layer endows PMPC-GLM microgel with satisfactory tribological properties as an aqueous lubricant additive, with the COF and wear rate reduced by 65% and 62%. In addition to hydration lubrication, the improved tribological performance is attributed to the formation of protective film on the worn surface.

engineering, mechanical
Liquid Metal-Based Supramolecular Oleogel Lubricants Constructed by Dynamic Disulfide and Hydrogen Bonds for Antiwear and Friction Reduction

Tiantian Wang,Shenghua Xue,Baoluo He,Shujuan Liu,Qian Ye,Feng Zhou,Weimin Liu

DOI: https://doi.org/10.1021/acs.chemmater.4c00325

IF: 10.508

2024-01-01

Chemistry of Materials

Abstract:Supramolecular oleogel is a promising lubricant, showing satisfactory lubrication performance and excellent stability. In this work, a series of gallium-based liquid metal (GLM)-based nano-oleogels were prepared by combining alkylthiol self-assembled GLM nanodroplets (C12@GLM) and alpha-lipoic acid ester-based dynamic covalently linked supramolecular gels. The dynamic disulfide bonds not only facilitate the formation of dense gel networks but also hinder the sedimentation of nanoparticles by forming coordinate bonds with C12@GLM, thereby conferring great dispersion stability (more than 2 months). The superior friction and wear reduction of nano-oleogels GLM@G-0.5 was observed, with the coefficient of friction decreased to 0.108 from 0.216, wear volume loss reduced by 73.04%, and the load carrying capacity increased from 50 to 550 N, compared with base oil. In conjunction with the shear thinning and creep recovery of the rheological properties of the nano-oleogels, the friction mechanism studies revealed that the gel networks of the nano-oleogels are disrupted under shear, releasing the base oil and nanoparticles. The formation of the lubricating film is assisted by the synergistic action of the nanoadditives and the gel lubricants, and the tribochemical reaction film consisting of iron oxides and iron sulfides, along with GLM nanodroplets.
Experimental study on operating characteristics of rotor-bearing system lubricated by gallium-based liquid metal

Chunjie Wei,Qi Chen,Jimin Xu,Xiaojun Liu,Wei Wang

DOI: https://doi.org/10.1108/ilt-03-2024-0067

2024-06-05

Industrial Lubrication and Tribology

Abstract:Purpose The purpose of this paper is to explore the operating characteristics of gallium-based liquid metals (GLMs) by directly adding them as lubricants in real mechanical equipment. Design/methodology/approach This paper conducts an analysis of the rotor-bearing system under GLM lubrication using a constructed test rig, focusing on vibration signals, surface characteristics of the friction pair, contact resistance and temperature rise features. Findings The study reveals that GLM can effectively improve the lubrication condition of the tribo-pair, leading to a more stable vibration signal in the system. Surface analysis demonstrates that GLM can protect the sample surface from wear, and phase separation occurs during the experimental process. Test results of contact resistance indicate that, in addition to enhancing the interfacial conductivity, GLM also generates a fluid dynamic pressure effect. The high thermal conductivity and anti-wear effects of GLM can reduce the temperature rise of the tribo-pair, but precautions should be taken to prevent oxidation and the loss of its fluidity. Originality/value The overall operating characteristics of the rotor-bearing system under GLM lubrication were investigated to provide new ideas for the lubrication of the rotor-bearing system. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0067/

engineering, mechanical
Preparation of Nanoscale Liquid Metal Droplet Wrapped with Chitosan and Its Tribological Properties As Water-Based Lubricant Additive

Xing Li,Zuankai Wang,Guangneng Dong

DOI: https://doi.org/10.1016/j.triboint.2020.106349

IF: 5.62

2020-01-01

Tribology International

Abstract:Gallium based liquid metals are emerging as promising lubricant candidates due to their high thermal stability and conductivity. However, the oxidization and instability of liquid metal limit their practical application in lubricant field. In this work, to overcome such problems, the nanoscale liquid metal droplet wrapped by chitosan (NLMWC) was fabricated through the ball milling method, which could be utilized as water-based lubricant additive. The microstructures of NLMWC as well as chemical stability and dispersion stability of NLMWC in water were observed. Moreover, our frictional tests demonstrate that when using NLMWC as additive in water, it holds good tribological performance including reduction of the friction coefficient and wear rate by 40% and 69%, in contrast to the pure water.
Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (transm2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties

Jianbo Tang,Xi Zhao,Jing Li,Rui Guo,Yuan Zhou,Jing Liu

DOI: https://doi.org/10.1021/acsami.7b10256

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Metals are excellent choices for electrical- and thermal-current conducting. However, either the stiffness of solid metals or the fluidity of liquid metals could be troublesome when flexibility and formability are both desired. To address this problem, a reliable two-stage route to improve the functionalities of gallium-based liquid metals is proposed. A series of stable semiliquid/semisolid gallium-based liquid metal amalgams with well-controlled particle packing ratios, which we call TransM2ixes, are prepared and characterized. Through effectively packing the liquid metal with copper particles (which are found to turn into intermetallic compound, CuGa2, after dispersing), remarkable enhancements in electrical conductivity (6 × 106 S m-1, ∼80% increase) and thermal conductivity (50 W m-1 K-1, ∼100% increase) are obtained, making the TransM2ixes stand out from current conductive soft materials. The TransM2ixes also exhibit appealing semiliquid/semisolid mechanical behaviors such as excellent adhesion, tunable formability, and self-healing ability. As a class of highly conductive yet editable metallic mixtures, the TransM2ixes demonstrate potential applications in fields like printed and/or flexible electronics and thermal interface materials, as well as other circumstances where the flexibility and conductivity of interfaces and connections are crucial.
Effects of Metal Element Doping on the Lubrication Behaviors and Mechanisms of Gallium-Based Liquid Metals

Qiang Liu,Yanxin Si,Xinjian Cao,Jun Cheng,Shengyu Zhu,Rengen Xu,Jie Guo,Jun Yang,Weimin Liu

DOI: https://doi.org/10.1016/j.wear.2023.205234

IF: 4.695

2024-01-01

Wear

Abstract:Gallium-based liquid metals (GLMs) are a novel high-end lubricant with low friction coefficient and excellent load-carrying capacity. This paper aims to improve the lubrication properties of GLMs by regulating the frictional interfaces. Six types of GLMs doped with Zn, Mg, Bi, Cu, Ti, or Sc elements are prepared respectively, and the effects of metal element doping on the lubrication behaviors and mechanisms for AISI 440C steel self-mated pairs are investigated in the mixed lubrication regime with a ball-on-three-plate setup. Doping 1 wt% Zn or Cu elements can improve the lubrication properties, with the friction coefficient reduced by 20.3 % and the wear rate reduced by 55.1 % compared with those under eutectic Ga/In/Sn lubrication. However, doping Ti, Sc, Mg, or Bi all reduce the lubrication properties. Doping Zn improves the lubrication properties of GLMs by promoting the adsorption of gallium on the frictional interfaces. Conversely, doping Bi inhibits the adsorption of gallium. The improvement in the lubrication properties of Cu-doped GLM is attributed to the formation of low-hardness CuGa2 particles. The doping of Ti or Sc generates high-hardness TiGa3 or ScGa3 particles, causing three-body abrasive wear. The doping of Mg generates a large number of Mg2Ga5 particles, seriously disrupting the stable lubrication.

Gallium-based liquid metal hybridizing MoS 2 nanosheets with reversible rheological characteristics and enhanced lubrication properties

Gallium-based Liquid Metal Hybridizing MoS2 Nanosheets with Reversible Rheological Characteristics and Enhanced Lubrication Properties.

Magnetically Responsive Gallium-Based Liquid Metal: Preparation, Property and Application.

The lubrication regimes and transition laws of gallium liquid-metal

Enhanced Lubrication Effect of Gallium-Based Liquid Metal with Laser Textured Surface

Improving the Wettability and Lubrication Properties of Gallium-Based Liquid Metal Through the Reaction Adsorption of Copper and Gallium

Elastohydrodynamic lubrication behaviors and mechanisms of gallium-based liquid metal/polydimethylsiloxane composite lubricant

Ga-based Liquid Metal: A Novel Current-Carrying Lubricant

Enhanced extreme pressure lubrication performance and load carrying capability of gallium-based liquid metal reinforced with MoSe2 and WSe2 nanoparticles

Lubrication Properties of Gallium-Based Liquid Metals by Doping Bismuth

Liquid Metal Hydrothermal Rheological Modification Method for High Performance Gallium‐Coated Carbon Microparticle Composites

Lubricating Behavior of Gallium-Based Liquid Metal for Cu/Al Tribo-Pair

Improving Tribological Behaviors of Gallium-Based Liquid Metal by H-Bn Nano-Additive

Improved lubrication and wear resistance of gallium-matrix liquid metal containing molybdenum diselenide nanoparticles under heavy load conditions

Ga-based Liquid Metal with Good Self-Lubricity and High Load-Carrying Capacity

Zwitterionic microgel-functionalized gallium-based liquid-metal nanodroplets as aqueous lubricant additives

Liquid Metal-Based Supramolecular Oleogel Lubricants Constructed by Dynamic Disulfide and Hydrogen Bonds for Antiwear and Friction Reduction

Experimental study on operating characteristics of rotor-bearing system lubricated by gallium-based liquid metal

Preparation of Nanoscale Liquid Metal Droplet Wrapped with Chitosan and Its Tribological Properties As Water-Based Lubricant Additive

Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (transm2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties

Effects of Metal Element Doping on the Lubrication Behaviors and Mechanisms of Gallium-Based Liquid Metals