Abstract:Sulfate is an important component of geological fluids, which is often encapsulated in fluid inclusions (FIs). Analyses of the composition of such FIs can provide important information on the origin and properties of the fluids inside. However, conventional microthermometric analyses are often hampered due to the complex composition of such fluids. Alternatively, in situ Raman spectroscopy is a powerful method to determine the aqueous sulfate concentration of FIs. Unfortunately, the effect of a common component, chloride, on the analytical results has not been well addressed yet. In addition, disagreements also exist in the current spectrum-processing method, which also prevents the application of this method in various geological cases. In this study, a series of fused silica capillary capsules (FSCCs) containing aqueous Na2SO4 (0.01-1.5 mol/kg) and Na2SO4-NaCl (mNa(2)SO(4) = 0.05 and 0.5 mol/kg, mNaCl = 0.1-4.0 mol/kg) solutions were prepared as standards. In situ Raman spectra for the stretching vibration of SO42- (v(1)-SO42-), the bending vibration (v(2)-H2O) and the stretching vibration (v(s)-H2O) of water were collected at room temperature. Results show that, for sulfate solutions, both v(2)-H2O and v(s)-H2O bands can be used as internal standards for the determination of aqueous sulfate concentration (mSO(4)(2-)). The peak area (A) ratios between v(1)-SO42- and v(2)-H2O (or v(s)-H2O) bands increased nearly linearly with mSO(4)(2-) in Na2SO4 solutions. Consequently, the relationships between mSO(4)(2-) and the spectral parameters (i.e., A(v(1)-SO42-)/A(v(2)-H2O) and A(v(1)-SO42-)/A(v(s)-H2O)) were established. However, the calculated mSO(4)(2-) will be underestimated when applying the above calibration curve to NaCl-Na2SO4 solutions, using A(v(2)-H2O) as an internal reference. In this case, the influence of chloride on the calculated mSO(4)(2-) will be largely eliminated when using A(v(s)-H2O) as an internal reference, or fitting the v(s)-H2O band with two Gaussian components at similar to 3230 cm(-1) and similar to 3450 cm(-1), and then using the total peak area as internal reference. It should be noted that our calibration results allow comparisons across different laboratories, because the spectral intensity was corrected to reduce the response function of the spectrometer, and the temperature and wavenumber dependence. Then, the A(v(1)-SO42-)/A(v(s)-H2O)-mSO(4)(2-) relationship was applied to natural FIs in fluorite from the Dalucao hydrothermal REE deposit (southwestern China), and in halite from the Paleogene evaporite in the Jianghan basin (South China). The mSO(4)(2-) in pre-REE stage fluorite-hosted FIs can reach 0.37 mol/kg, indicating that sulfate are responsible for the hydrothermal transport of REE. The mSO(4)(2-) in the halite-hosted FIs were found to be in close association with the mineral assemblage, serving as an indicator for the degree of evaporation or sedimentary facies.

Method for In-Situ Determination of Concentration of Components in Hydrothermal Environments

On-Site Measurement of Trace-Level Sulfide in Natural Waters by Vapor Generation and Microchannel Collection

Simultaneous Determination of Cr, As, Se, and Other Trace Metal Elements in Seawater by ICP-MS with Hybrid Simultaneous Preconcentration Combining Iron Hydroxide Coprecipitation and Solid Phase Extraction Using Chelating Resin

In-situ measurement of dissolved sulfide in surface sediment porewater using diffusive gradients in thin films (DGT) coupled with digital imaging

Volatile Chalcophile Elements In Native Sulfur From A Submarine Hydrothermal System At Kueishantao, Offshore Ne Taiwan

Direct H2S, HS− and pH Measurements of High‐Temperature Hydrothermal Vent Fluids With In Situ Raman Spectroscopy

Determination of Sulfide with Acidic Permanganate Chemiluminescence for Development of Deep-sea in-situ Analyzers

In Situ Selective Measurement of Se IV in Waters and Soils: Diffusive Gradients in Thin-Films with Bi-Functionalized Silica Nanoparticles.

On-site and high-resolution spectrophotometric measurement of total dissolved sulfide in natural waters

A Novel in Situ Method for Simultaneously and Selectively Measuring AsIII, SbIII, and SeIV in Freshwater and Soils.

Development of a deep-sea hydrogen sulfide ion sensor and its application for submarine hydrothermal plume exploration

Impact of environmental factors on in situ determination of iron in seawater by flow injection analysis

Feasibility Study on Quantitative Analysis of Sulfide Concentration and pH of Marine Sediment Pore Water via Raman Spectroscopy

Voltammetric Determination of Low-Molecular-Weight Sulfur Compounds in Hydrothermal Vent Fluids - Studies with Hydrogen Sulfide, Methanethiol, Ethanethiol and Propanethiol

Direct-determination of High-Concentration Sulfate by Serial Differential Spectrophotometry with Multiple Optical Pathlengths

Headspace separation combined fluorescence detection of hydrogen sulfide with silver-sensitized lanthanide coordination polymer via a simple self-made device

In Situ Raman Spectroscopic Quantification of Aqueous Sulfate: Experimental Calibration and Application to Natural Fluid Inclusions

Highly Stable and Selective Measurement of Fe3+ Ions under Environmentally Relevant Conditions Via an Excitation-Based Multiwavelength Method Using N, S-doped Carbon Dots

High Precision In-Situ Pb Isotopic Analysis of Sulfide Minerals by Femtosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

Rapid and High-Precision Measurement of Sulfur Isotope and Sulfur Concentration in Sediment Pore Water by Multi-Collector Inductively Coupled Plasma Mass Spectrometry.

Determination and speciation of trace and ultratrace selenium ions by energy-dispersive X-ray fluorescence spectrometry using graphene as solid adsorbent in dispersive micro-solid phase extraction