Abstract:The bearing property and deformation failure law of the CFST circular arch were investigated in order to provide direction for the optimization of the concrete-filled steel tube (CFST) support. The flexural bearing capacity test of the 194 mm × 10 mm CFST was performed initially in this study. It was primarily explored how bearing capacity and deformation of circular arches were affected by the slip of the arch foot and anti-bending strengthening, and the neutral layer migration rule and anti-bending strengthening mechanism of circular arches were examined. The bearing performance of the circular arch under the condition of the concentrated load of the vault and the usual uniform load of the entire span is then simulated in an orthogonal test by numerical simulation in order to extend the experimental investigation. The effect of variables including the steel tube’s outer diameter, thickness, slip of the arch foot, and the ratio of the arch rise to span on the bearing capacity of the circular arch is examined. The study demonstrates that under focused stress on the arch top or full-span normal uniform loading, the arch foot slip is the most important element impacting the CFST support’s bearing capacity. In steel tubes with the same outer diameter and wall thickness, the vector span ratio has a bigger influence than anti-bending strengthening. When the span ratio is the same, the influence of the outer diameter and wall thickness are equal and outweigh the influence of bending strengthening. The circular arch with an outside diameter of 168 mm, a wall thickness of 10 mm, and a rise-span ratio of 0.207 has the best performance characteristics under the influence of concentrated load, and the ultimate failure mechanism is local waist drum deformation failure. Based on the aforementioned study findings, the circular CFST support’s buckling deformation and drum deformation are examined, and a composite support consisting of “anchor net spray + CFST support” is directed for the north three deep track downhill of Yangcheng Coal Mine. Two failure types expose the failure mechanism and provide a technique for optimization. The support had contributed to the circular CFST arc arch’s best bearing performance in the event of waist drum deformation and failure.

Static performance of precast concrete arches with carbon fiber reinforced polymer reinforcement

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates

Test Study on Bearing Capacity of a New Steel-concrete Composite Arch

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Numerical simulation on the load-bearing capacity of CFRP-strengthened concrete arches

Concrete protective arches reinforced with BFRP bars: Construction and quasi-static structural performances

Failure Mechanisms of CFRP-wrapped Protective Concrete Arches under Static and Blast Loadings: Experimental Research

CFRP Strengthening Reinforced Concrete Arches: Strengthening Methods and Experimental Studies

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Load Carrying Capacity of CFRP Retrofitted Broken Concrete Arch

Numerical Analysis of Underground Concrete Arch Structure Strengthened with Near-Surface Bonded CFRP Strips

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Behavior of concrete voussoir flexible arch bridges reinforced with FRP composites

Experimental study on the ultimate bearing capacity of damaged RC arches strengthened with ultra-high performance concrete

Spalling in Concrete Arches Subjected to Shock Wave and CFRP Strengthening Effect

Experiment on the Segment Model of a Plain Concrete Arch Bridge Reinforced with UHPC Composite Arch Circle

Experimental and numerical study on slender concrete-filled steel tubular arches subjected to tilting loads

Experimental research and engineering application on bearing capacity of concrete-filled steel tube circular arch

Adjustable arch-beam combination structural strengthening system for reinforced concrete beam bridge