Abstract:Amphiphilic block copolymers comprise a fascinating class of smart materials due to their unique ability to self-organize, making them attractive candidates for a wide range of applications in materials engineering and medical sciences. The synthesis of these copolymers commonly involves harmful solvents, especially in classical living anionic polymerization. With the development of reversible addition–fragmentation chain transfer (RAFT) and polymerization–induced self-assembly (PISA), an environmentally more friendly and versatile method has been established for the synthesis of such amphiphilic block copolymers. Through the utilization of visible light to initiate polymerization through the so-called photoiniferter process, we emphasize the adaptability of this photopolymerization in different scales although the incident light illuminates only the surface area of the reaction vessels. We describe an easily adjustable, blue-light-initiated RAFT PISA approach to synthesize a series of amphiphilic poly(N,N-dimethylacrylamide)–block–polystyrene (PDMA–b–PS) and poly(4-vinylpyridine)–block–polystyrene (P4VP–b–PS) diblock copolymers with low molecular weight dispersities. The polymerizations were conducted as both two-step and semibatch processes. Furthermore, the effect of scalability on the polymerization kinetics was investigated, proving the light-induced RAFT polymerization as a scalable polymerization method in a batch process with a reaction volume of up to 500 mL. The bulk morphology of both resulting diblock copolymers having different weight fractions of the minor and major blocks was analyzed. While a cylindrical PDMA microdomain in a PS matrix can be observed at 20–25% by weight of PDMA, the equivalent composition reveals a spherical morphology of P4VP domains in a PS matrix. In essence, the scalable, rather eco-friendly photoinduced synthesis of tailored, nanostructured block copolymers without harmful solvents significantly increases their suitability for applications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to prepare amphiphilic block copolymers in a water - alcohol medium through visible - light - induced RAFT polymerization. Specifically, the researchers developed a catalyst - free, surfactant - free and initiator - free blue - light - induced iniferter RAFT emulsion polymerization method for synthesizing poly(N,N - dimethylacrylamide) - block - polystyrene (PDMA - b - PS) and poly(4 - vinylpyridine) - block - polystyrene (P4VP - b - PS) amphiphilic diblock copolymers. ### Main Objectives: 1. **Environmental Friendliness**: Traditional methods for synthesizing amphiphilic block copolymers usually require the use of harmful solvents, especially the classic living anionic polymerization. The method proposed in this paper uses a water - alcohol mixed medium, which is more environmentally friendly. 2. **Controllability**: Through visible - light - induced RAFT polymerization, a high degree of control over the polymerization process is achieved, thereby obtaining copolymers with a low molecular weight dispersity. 3. **Scalability**: The applicability of this method at different reaction scales was studied, demonstrating its good scalability in batch processes with a maximum reaction volume of up to 500 ml. 4. **Formation of Nanostructures**: Through the polymerization - induced self - assembly (PISA) process, the morphologies of amphiphilic diblock copolymers with different composition ratios in the bulk phase, such as cylindrical and spherical micro - domain structures, were studied. ### Key Points of the Solution: - **Photo - initiated RAFT Polymerization**: Radicals are directly generated from the macro - chain transfer agent (macroCTA) using a self - made blue LED light source to initiate polymerization. - **Two - step and Semi - continuous Methods**: The initial monomers of PDMA and P4VP were respectively synthesized by combining solution polymerization and emulsion polymerization, and then reacted with styrene through chain extension. - **Kinetic Monitoring**: The kinetic behavior of the polymerization process and the evolution of particle morphology were studied in detail by means of conversion rate, pseudo - first - order kinetic plots, transmission electron microscopy (TEM) and dynamic light scattering (DLS). - **Scalability Verification**: Experiments were carried out at different reactor scales to verify the feasibility and stability of this method at a larger scale. ### Experimental Results: - **Synthesis of PDMA - b - PS**: PDMA - b - PS diblock copolymer was successfully synthesized by chain extension at 70 °C and a light intensity of 87 mW·cm\(^{-2}\). TEM and DLS analyses showed that as the polymerization time increased, the average hydrodynamic radius of the colloidal particles gradually increased and finally stabilized at about 30 nm. - **Synthesis of P4VP - b - PS**: Due to the low solubility of P4VP in water, the water - alcohol ratio was adjusted to 40:60 (w/w) and polymerization was carried out at 60 °C and a light intensity of 87 mW·cm\(^{-2}\). The results showed that the average hydrodynamic radius of P4VP - b - PS colloidal particles was slightly larger than that of PDMA - b - PS, but also showed good monodispersity. In conclusion, this paper successfully prepared a variety of amphiphilic block copolymers by developing an environmentally friendly blue - light - induced RAFT emulsion polymerization method, and studied in detail their synthesis process and the formation mechanism of nanostructures. This method not only has a high degree of controllability and scalability, but also provides new possibilities for future applications in the fields of materials engineering and medical science.

Amphiphilic Block Copolymers via Blue-Light-Induced Iniferter RAFT Ab Initio Emulsion Polymerization in Water–Alcoholic Media

One-pot Synthesis of Octablock Copolymers of High-Molecular Weight Via RAFT Emulsion Polymerization

Ab Initio Emulsion RAFT Polymerization of Vinylidene Chloride Mediated by Amphiphilic Macro‐raft Agents

The Synthesis of High Molecular Weight Block Copolymers by Raft Polymerization

Polymerization-Induced Self-Assembly of Block Copolymer Nano-objects via RAFT Aqueous Dispersion Polymerization

Synthesis of Hydrophobic Block Copolymer Nanoparticles in Alcohol/Water Stabilized by Poly(methyl methacrylate) via RAFT Dispersion Polymerization-Induced Self-Assembly

Synthesis of Diblock Copolymer Nanoparticles via RAFT Alcoholic Dispersion Polymerization: Effect of Block Copolymer Composition, Molecular Weight, Copolymer Concentration, and Solvent Type on the Final Particle Morphology

Synthesis of Amphiphilic Highly Branched Block Copolymers Based on Mechanism Transformation from Anionic Polymerization into RAFT-based Polymerization

From RAFT Emulsion Polymerization to RAFT Dispersion Polymerization: A Facile Approach to tune Dispersities and Self-assembled Behaviors of Block Copolymers

Amphiphilic pH-responsive ABC triblock copolymers via RAFT-mediated aqueous PISA and comparison with their A- b -(B- co -C) diblock copolymer counterparts

In situ synthesis of diblock copolymer nano-assemblies via dispersion RAFT polymerization induced self-assembly and Ag/copolymer composite nanoparticles thereof

Synthesis of Conjugated-Acidic Block Copolymers by Atom Transfer Radical Polymerization

Preparation, Kinetics and Microstructures of Well-Defined PS-b-PS/Bd Diblock Copolymers Via RAFT Miniemulsion Polymerization

Synthesis and Characterization of All-Acrylic Tetrablock Copolymer Nanoparticles: Waterborne Thermoplastic Elastomers via One-Pot RAFT Aqueous Emulsion Polymerization

Visible Light Photoiniferter Polymerization for Dispersity Control in High Molecular Weight Polymers

Scalable Preparation of Alternating Block Copolymer Particles with Inverse Bicontinuous Mesophases

Enhanced synthesis of multiblock copolymers via acid-triggered RAFT polymerization

Guidelines for the Synthesis of Block Copolymer Particles of Various Morphologies by RAFT Dispersion Polymerization.

Synthesis of Amphiphilic Block Copolymer Poly(styrene-b-acrylic Acid)by Atom Transfer Radical Polymerization and Its Micellization

Synthesis of Conjugated−Ionic Block Copolymers by Controlled Radical Polymerization

Polymerization-Induced Self-Assembly via RAFT-Mediated Emulsion Polymerization of Methacrylic Monomers