Abstract:The simultaneous doping of hafnium dioxide nanoparticles and metal‐organic framework (MOF) nanoparticles into the SiCN ceramic precursor enhances both the mechanical and electromagnetic wave absorption performance of the resulting SiCN ceramic. Polymer‐derived ceramics (PDCs) have become promising candidates for electromagnetic wave (EMW) absorption due to their high thermal stability, design flexibility, and versatile functionality. However, the inevitable porous structure formed during pyrolysis greatly limits its mechanical performance. In this work, Ni–Fe–C/HfO2/SiCN ceramic was prepared by simultaneously doping nickel and iron‐containing metal‐organic framework (Ni–Fe–MOF) nanoparticles and hafnium dioxide (HfO2) nanoparticles into the ceramic precursor, thereby improving its intrinsic brittle structure while granting it extraordinary EMW absorption performance. The flexural strength, flexural modulus, and Vickers hardness of Ni–Fe–C/HfO2/SiCN ceramic were 101.06 MPa, 40.19 GPa, and 13.31 GPa, respectively. These values were 1 132%, 749%, and 191% higher than those of the initial SiCN ceramics. In addition, by optimizing the content of Ni–Fe–MOF, the Ni–Fe–C/HfO2/SiCN ceramic demonstrated satisfying EMW absorption performance from 25°C to 500°C. At 25°C, the minimum reflection loss (RLmin) and effective absorption bandwidth (EAB) were −54.07 dB and 3.95 GHz, covering 94% of the X‐band at a thickness of 2.27 mm. At 500°C, the RLmin and EAB were −33.72 dB and 1.82 GHz, still covering 43% of the X‐band at a thickness of only 1.65 mm. This work provides valuable insight into the integration of mechanical and EMW absorbing functions of PDC materials.

Preparation of CNTs-HfB 2 -SiBCN ceramic composite coatings with adjusted electrical conductivity

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

Electrical conductivity and infrared radiation performance of SiC-CNT composite ceramics

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Synthesis, microstructure and electromagnetic properties of Hf-based SiBCN ceramics

Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

Conductivity of SiCNO-BN composite ceramics and their application in wireless passive temperature sensor

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers

Multifunctional Thermal Barrier Application Composite with SiC Nanowires Enhanced Structural Health Monitoring Sensitivity and Interface Performance.

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Development of the Conductive Polymer Matrix Composite with Low Concentration of the Conductive Filler

Oxidation and Ablation Behavior of Particle-Filled SiCN Precursor Coatings for Thin-Film Sensors

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio

Enhanced dielectric and conductivity properties of carbon-coated SiC nanocomposites in the terahertz frequency range

Nanoparticles‐doped polymer‐derived SiCN ceramic with enhanced mechanical properties and electromagnetic wave absorption

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

Optimization of Carbon Nanotube Doping on Nonlinear Conductivity, Surface Charge Dissipation and Electric Field Regulation of SiC/SR Composites Insulators Subjected to DC High Voltages

Fabrication of electrically conductive barium aluminum silicate/silicon nitride composites with enhanced strength and toughness