Abstract:Wellbore stability is important to deep-sea drilling (DSD) for exploiting offshore oil and gas resources. Accurate prediction of the mechanical behaviors of rock formation around the wellbore can effectively prevent wellbore failure via adjusting mud weight. In this paper, a fully coupled thermo-poro-elastic (THM) model is developed by combining fluid circulation in the wellbore and rock deformation in the reservoir. Transient heat transfer in the wellbore/reservoir and heat exchange between the tubing, annulus, riser, casing, cement, seawater and rock formation are considered. By decomposing the problem into axisymmetric and antisymmetric sub-problems, the analytical solutions for transient temperature, pressure and stress in the rock formation and fluid temperature changes in the drill pipe, annulus and seawater near the riser are obtained and validated against with the numerical solutions, existing fluid circulation model, field measurement data and the existing model without considering fluid circulation. After that, a typical case study is carried out to show the mechanical behavior around the wellbore. It is found that the proposed fully coupled THM model has a high accuracy with a relative error of around 1.2%. There is a large difference in the predicted bottomhole temperature (BHT) and thus the temperature in the reservoir between the models with and without considering fluid circulation in the wellbore. An assumption of constant temperature boundary condition may lead to overestimated or underestimated results depending on the selection of the assigned wellbore temperature. In the DSD case studied, the rock formation at the upper part of the reservoir (Z < 0.40) is continuously heated and the rock formation at the lower part (Z > 0.6) of the reservoir is continuously cooled during fluid circulation, which thus results in a complex heat transfer and thus mechanical behavior in the wellbore/reservoir system, especially near the wellbore. The bottomhole temperature (BHT) decreases by 38.9 K due to cold fluid circulation from 3.68 min to 25.68 days, which can lead to 14.59 MPa tensile stress that cannot be ignored for wellbore stability analysis. The proposed analytical model provides a useful tool to predict the mechanical behaviors such as the transient temperature, pressure, displacement and stresses in the wellbore/reservoir system during fluid circulation in DSD. It runs efficiently in terms of seconds per case study in a portable laptop computer and can also work a benchmark for other numerical methods. However, the fully coupled THM model and its analytical solution are based on several assumptions, such as the heat generated by the drill bit rotation is ignored and only the liquid phase is considered, which requires further investigation.

Coupled wellbore–reservoir heat and mass transfer model for horizontal drilling through hydrate reservoir and application in wellbore stability analysis

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

Stability Characteristics of Natural Gas Hydrate Wellbores Based on Thermo-Hydro-Mech Modeling

Research on Wellbore Stability in Deepwater Hydrate-Bearing Formations during Drilling

Modeling of wellbore multiphase flow with free gas influx during horizontal drilling in marine hydrate reservoirs

Numerical Simulation of Hydrate Dissociation Behaviors in Hydrate Reservoir with Different Properties during Horizontal Well Drilling

Numerical analysis of horizontal wellbore state during drilling at the first offshore hydrate production test site in Shenhu area of the South China Sea

Numerical insights into factors affecting collapse behavior of horizontal wellbore in clayey silt hydrate-bearing sediments and the accompanying control strategy

Coupled THM Modelling of Wellbore Stability with Drilling Unloading, Fluid Flow, and Thermal Effects Considered

Numerical Simulation of Hydrate Decomposition during the Drilling Process of the Hydrate Reservoir in the Northern South China Sea

A Fully Coupled Thermo-Poro-elastic Model Predicting the Stability of Wellbore in Deep-Sea Drilling. Part A: Analytic Solutions

Fully Coupled Thermo-hydro-mechanical Model for Wellbore Stability Analysis in Deep Gas-Bearing Unsaturated Formations Based on Thermodynamics

Effect of Drilling Fluid Invasion on Natural Gas Hydrate Near-Well Reservoirs Drilling in a Horizontal Well

Wellbore Temperature and Pressure Field in Deep-water Drilling and the Applications in Prediction of Hydrate Formation Region

Study on the Evolution Law of Wellbore Stability Interface during Drilling of Offshore Gas Hydrate Reservoirs

Stability of the wellbore wall during marine hydrate depressurization production based on a modified Drucker-Prager model

Multiphase Flow Behavior in Deep Water Drilling: the Influence of Gas Hydrate

Fully coupled two-phase hydro-mechanical model for wellbore stability analysis in tight gas formations considering the variation of rock mechanical parameters

A Transient Analytical Model for Predicting Wellbore/Reservoir Temperature and Stresses during Drilling with Fluid Circulation

Porochemothermoelastic Solutions Considering Fully Coupled Thermo-Hydro-mechanical-chemical Processes to Analyze the Stability of Inclined Boreholes in Chemically Active Porous Media

Long-Term Performance and Security of Gas Production for Horizontal-Well Depressurization Exploitation: Insights from a Coupled Thermo-Hydro-Mechanical-Chemical Model for the Shenhu Hydrate Reservoir