Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Buckling behaviour of double-layer and single-layer stainless steel cylinders under external pressure

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Numerical Simulation on Buckling of Combined Multilayered Unequal-Thickness Cylindrical Shell

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Free bulging of thin-walled cylinders closed by two heavy plates

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions