Abstract:Doubly fed induction generators (DFIG) find extensive application in variable-speed wind power plants, providing notable advantages such as cost-effectiveness, operational flexibility across varying speeds, and enhanced power quality. This research focuses on the control of DFIGs employed in variable-speed wind turbine configurations. A suitable mathematical model is chosen for representative systems following a comprehensive review of contemporary research. Subsequent analysis reveals the instability of the open-loop time response of the system. To address this instability, the initial approach involves the implementation of the conventional model predictive controller (MPC). However, the outcomes indicate that this controller falls short of delivering satisfactory performance despite the enhanced stability. In the subsequent phase, efforts are made to mitigate the impact of wind input variability by utilizing the Kalman filter, given its effectiveness in handling high variability. Following this, a novel methodology is introduced, which combines nonlinear MPC with the Lyapunov function. This method is based on the nonlinear model of the system. By using the Lyapunov function in the nonlinear MPC structure, the stability of the designed controller is guaranteed. To validate the proposed control approach, the results are compared with PID based controller in MATLAB/Simulink. The simulation results showed that the output variables of the modeled DFIG system achieve stability within a reasonable timeframe applying the input.

Model-Free Predictive Current Control of DFIG Based on an Extended State Observer Under Unbalanced and Distorted Grid

Model-Free Predictive Current Control of a DFIG Using an Ultra-Local Model for Grid Synchronization and Power Regulation

A Modified Model-Free Predictive Current Control Method Based on an Extended Finite Control Set for DFIGs Applied to a Nonideal Grid

Model‐free predictive rotor current control of DFIGs based on an adaptive ultra‐local model under nonideal power grids

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

Low-Complexity Model Predictive Stator Current Control of DFIG under Harmonic Grid Voltages

Improved MRAS Observer and Sensorless Control of DFIG During Network Voltage Unbalance

Model Predictive Stator Current Control of Doubly Fed Induction Generator During Network Unbalance

Dynamic Modeling and Improved Control of Dfig under Distorted Grid Voltage Conditions

Model-Free Predictive Current Control of PMSM Using Modified Extended State Observer

Data-Enabled Finite Control-Set Model Predictive Control of a Grid-Tied Inverter

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

A Robust Deadbeat Predictive Current Control Method for IPMSM

Multi-objective Optimization Control of DFIG System under Distorted Grid Voltage Conditions

Nonlinear Model Predictive Control for Doubly Fed Induction Generator with Uncertainties

Virtual Voltage Vector-Based Sequential Model-Free Predictive Control for Multiparalleled NPC Inverters

Improved Finite Set Model Predictive Current Control of Grid Side Converter in Weak Grid Using Kalman Filter

Finite Control Set Model-Free Predictive Current Control of a Permanent Magnet Synchronous Motor

Improved Finite Control Set Model Predictive Current Control for Permanent Magnet Synchronous Motor with Sliding Mode Observer

Coordinated Control of DFIG's Converter Under Unbalanced Grid Voltage Conditions Based on Predictive Current Control