Abstract:Advanced lithium-ion batteries with high energy density, highrate capability, and excellent cycling performance are critically important for automotive and stationary energy storage applications such as electric vehicles, portable electronics, power tools, and energy storage for many types of renewable energy sources.[1–3] From the materials point of view, silicon is one of the most promising candidates as an anode material for these lithium-ion batteries owing to its abundance in nature, relatively low working potential, and highest known theoretical charge capacity of 4200 mAh g−1, 11 times higher than that of commercialized graphite.[4,5] One major challenge is that the dramatic volume change (>300%) for Si during lithium insertion and extraction processes causes capacity fading due to severe pulverization and electrical disconnection from the current collector, thus hindering practical applications.[5–8] In order to overcome these drawbacks, it is highly desirable to explore nanostructured silicon anodes with more robust architectures.[9–13] So far, silicon nanostructures (and their composites) with a variety of different dimensionalities, including nanoparticles,[14–18] nanospheres,[19] nanowires,[8,20–29] nanotubes,[30–32] nanoscale thin films,[7,33–35] and three-dimensional porous particles[36] have been reported to provide improved electrochemical performance over bulk silicon materials. These results are encouraging for the development of Si nanomaterials as potential building blocks for high-performance anode materials in lithium-ion batteries. Yet, scale-up and industrial implementation of these silicon nanostructures still lag behind and further improvements in overall performance, scalability, and cost are critically required. For example, silicon thin films exhibit highly improved cycling performance,[33,34] thanks to the anisotropy of their volume change. However, the optimized film thickness is usually a few hundred nanometers, which results in an areal capacity of ≈0.1 mAh cm−2, which is insufficient for application. Anodes made from one-dimensional silicon-based nanostructures can provide open space while remaining electrically connected to current collectors, allowing designs[8,12,13,30] which accommodate the volume change of silicon during lithium insertion. These nanostructures offer good contact with the current collectors at medium charge/discharge rate without

Optimization of Si-containing and SiO based Anodes with Single-Wall Carbon nanotubes for High Energy Density Applications

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Investigation of The Failure Mechanisms of Li-Ion Pouch Cells with Si/Graphite Composite Negative Electrodes and Single Wall Carbon Nanotube Conducting Additive

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Nanostructured Silicon-Carbon 3D Electrode Architectures for High-Performance Lithium-Ion Batteries

Encapsulating Micro-Nano Si/SiO(x) into Conjugated Nitrogen-Doped Carbon As Binder-Free Monolithic Anodes for Advanced Lithium Ion Batteries.

High-yield and scalable synthesis of a Silicon/Aminosilane-functionalized Carbon NanoTubes/Carbon (Si/A-CNT/C) composite as a high-capacity anode for lithium-ion batteries

Silicon-Based Anodes for Lithium-Ion Batteries: Effectiveness of Materials Synthesis and Electrode Preparation

Carbon Nanotube-Reinforced Dual Carbon Stress-Buffering for Highly Stable Silicon Anode Material in Lithium-Ion Battery.

Advances in Carbon Nanotubes and Carbon Coatings as Conductive Networks in Silicon‐based Anodes

Carbon Nanotube-Enhanced Growth of Silicon Nanowires As an Anode for High-Performance Lithium-Ion Batteries

The critical role of carbon in marrying silicon and graphite anodes for high‐energy lithium‐ion batteries

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

Enhanced Lithium Storage Performance: Dual-Modified Electrospun Si@MnO@CNFs Composites for Advanced Anodes

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery.

Constructing Densely Compacted Graphite/Si/SiO2 Ternary Composite Anodes for High-Performance Li-Ion Batteries

Improving the Performance of Micro-Silicon Anodes in Lithium-Ion Batteries with a Functional Carbon Nanotube Interlayer

Building sandwich-like carbon coated Si@CNTs composites as high-performance anode materials for lithium-ion batteries

Constructing Densely Compacted Graphite/Si/SiO 2 Ternary Composite Anodes for High-Performance Li-Ion Batteries

Batch-Scale Synthesis and Interfacially Enhanced Stability of Silicon Suboxide-Based Anodes toward High-Performance Lithium-Ion Batteries