Electrochemical silica removal from carbon nanotube surfaces: Energy consumption and removal mechanisms

Kimya Rajwade,Qilin Li,François Perreault

DOI: https://doi.org/10.1016/j.colsurfa.2024.133284

IF: 5.518

2024-01-26

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Inorganic fouling, or scaling, is a major challenge for engineered systems exposed to aqueous environments, particularly in water treatment, desalination , or thermal systems where the high salinity and temperature conditions favor surface scaling. Silica, in particular, is hard to remove once a scaling layer forms on the surface. Current scaling mitigation strategies include the addition of antiscalants, physical cleaning by flushing or backwashing, and pretreatment of the feed water. These mitigation strategies increase operation costs due to increased chemical use and system downtime, as well increase the complexity of the process. In this work, we investigated the ability of carbon nanotube (CNT) coatings to disperse silica from the surface via electrochemical reactions, providing a chemical-free approach to scaling control. Silica scaling was induced and then dispersed from CNT coupons upon the application of a potential difference across the experimental set up, with the CNT coupon acting as a cathode or anode. Scale removal was measured using optical coherence tomography at different applied current densities. In this study, a cathodic current of 2.5 A/m 2 was found to achieve the highest silica removal: > 75% after 30 min. Control experiments conducted using pH-buffered solutions and pH-insensitive gypsum as the scaling mineral suggest that silica dispersion from the CNT surface was due to a combination of gas evolution and interfacial pH change. These results provide a better understanding of the potential of using electrochemical coatings for the removal of inorganic fouling from surfaces.

chemistry, physical