Abstract:The three stages of loess collapse are characterized by notable concealment and sudden onset due to the sudden nature of loess collapse and the prolonged duration of the peristaltic deformation stage. Traditional displacement monitoring methods struggle to detect early signals of instability and failure, leading to poor timeliness in disaster warnings. This project begins by examining non-force field information related to the loess collapse process. It focuses on acoustic emission monitoring and employs model tests to identify effective waveguide rods for monitoring loess collapse. Additionally, the project investigates the evolution anomalies of acoustic emission parameters before and after loess collapse failure, aiming to establish early warning criteria for loess collapse based on acoustic emission. This work provides a theoretical basis for monitoring and early warning of loess collapses. This study evaluates five parameters of the active waveguide system: sensor installation method, filling material, waveguide rod wall thickness, outer wrapping material, and outer wrapping wall thickness. The densities of the filler materials were tested using the optimal parameters derived from the tests to identify the best configurations for active acoustic emission (AE) waveguide systems suitable for monitoring loess collapse. Subsequently, a one-sided connected loess collapse model was employed for indoor tests, integrating real-time AE monitoring with the active waveguide method. This model facilitates the exploration of AE response characteristics during loess collapse and the analysis of destructive forms of loess collapse and time-sequence evolution of AE ringing counts throughout the deformation and destruction process. Results indicate that using filler materials with high elasticity modulus, high compactness, and low Poisson's ratio, along with thin outer wrapping and waveguide rod walls, leads to strong AE signals. As deformation damage of loess collapse intensifies, the number of AE ringing counts notably increases. A rapid rise in cumulative ringing counts can indicate a "sudden increase", or the b-value may stabilize, providing precursor information for loess collapse.

Active waveguide deformation dynamics using acoustic emission technology for landslide early warning system

Analyzing the effects of critical active waveguide parameters on acoustic emission characteristics for soil slope deformation monitoring

Monitoring warning criterion of acoustic emission active waveguide system based on loess deformation and failure

Experimental investigation and field application of acoustic emission array for landslide monitoring

Experimental Investigation on Progressive Deformation of Soil Slope Using Acoustic Emission Monitoring

Real-time Damage Assessment of Hydrous Sandstone Based on Synergism of AE-CT Techniques

Experimental Investigation on Integrated Subsurface Monitoring of Soil Slope Using Acoustic Emission and Mechanical Measurement

Numerical Simulation of Landslide Acoustic Emission Characteristics Using Waveguide Techniques

Prefabricated acoustic emission array system for landslide monitoring

The Experimental Investigation on Progressive Deformation of Shear Slip Surface Based on Acoustic Emission Measurements

Model Test on Acoustic Emission Monitoring of Loess Slope Failure

Experimental Study of Static and Dynamic Loading Effects on Guided Wave-Based Intelligent Monitoring of Welded Rail Joints

Evaluation of Soil Moisture and Shear Deformation Based on Compression Wave Velocities in a Shallow Slope Surface Layer

Correlation between Acoustic Emission Behaviour and Dynamics Model during Three-Stage Deformation Process of Soil Landslide

An Experimental Study of the Acoustic Signal Characteristics of Locked-Segment Damage Evolution in a Landslide Model

Potential impacts in soil slope of deformation and water content on elastic wave amplitude

An Acoustic Emission Activity Detection Method based on Short-Term Waveform Features: Application to Metallic Components under Uniaxial Tensile Test

Acoustic emission monitoring in geotechnical element tests

Acoustic emission response characteristics and numerical simulation of soil failure under uniaxial compression

High-resolution geophysical monitoring of moisture accumulation preceding slope movement – a path to improved early warning

Coda-wave monitoring of continuously evolving material properties and the precursory detection of yielding