Abstract:Supported manganese oxide catalysts were prepared by the impregnation of alumina foam blocks washcoated with alumina and silica. The manganese content based on the weight of the washcoats was 10 wt % calculated as MnO2. Fourier transform profiles of the Mn K-edge EXAFS spectra for these samples gave three distinctive peaks at 0.15, 0.25, and 0.32 nm and were close to the profiles of Mn3O4 and beta-MnO2. The number of surface active sites was determined through oxygen chemisorption measurements at a reduction temperature (Tred = 443 K) obtained from temperature-programmed reduction (TPR) experiments. Acetone catalytic oxidation was studied from room temperature to 573 K, and was found to be highly accelerated by the use of ozone on both catalysts with substantial reductions in the reaction temperature. The only carbon-containing product detected was CO2. The alumina-supported catalyst was found to be more active than the silica-supported catalyst in acetone and ozone conversion, with higher turnover frequencies (TOFs) for both reactions. The pressure drop through the foam was low and increased little (0.003 kPa/10 000 h(-1)) with space velocity. In situ steady-state Raman spectroscopy measurements during the acetone catalytic oxidation reaction showed the presence of an adsorbed acetone species with a C-H bond at 2930 cm(-1) and a peroxide species derived from ozone with an O-O bond at 890 cm(-1).

Study on Synthetic Process of Acetone Oxime Catalytic Ammoxidation by TS-1

Study on the Side Reaction in Acetone Oxime Synthesis from Ammoxidation of Actone

Synthesis of Acetone Oxime Through Acetone Ammoximation over TS-1

Formation and transformation of nitroso compounds of ketoxime isomers in ketone ammoximation catalyzed by hollow titanium silicalite

Synthesis of 4-Hydroxy-3-methoxyphenylacetonitrile

The mechanism of catalyst deactivation and by-product formation in acetone ammoximation catalyzed by hollow titanium silicalite

Green Route to Synthesize Oxime

An Improved Synthesis of 2,2-Diethoxypropane by Using Triethyl Orthofomate

Ionic Liquid Dispersed Ti/SBA-15 for Double-Bond Cleavage Oxidation of Α-Methylstyrene into Acetophenone

The Reaction Mechanism of Acetaldehyde Ammoximation to Its Oxime in the TS-1/H2O2 System

Study On Catalytic Synthesis Of 1,3-Benzodioxoles By Haimcm-41 Zeolite

Nickel-Modified TS-1 Catalyzed the Ammoximation of Methyl Ethyl Ketone

Copper‐Catalysed (Diacetoxyiodo)benzene‐Promoted Aerobic Esterification Reaction: Synthesis of Oxamates from Acetoacetamides

Synthesis of acetals and ketals catalyzed by HMAS-5 molecular sieve

Cyclohexanone Ammoximation over TS-1 Catalyst Without Organic Solvent in a Microreaction System

Ammoxidation of methyl ethyl ketone catalyzed by modified TS-1

Catalytic Acetone Oxidation over MnOx Catalysts: Regulating Their Crystal Structures and Surface Properties

Low Temperature Ozonation of Acetone by Transition Metals Derived Catalysts: Activity and Sulfur/Water Resistance

Study on the Synthesis Process of Ring Oxidation of Cyclohexane to Two Adjacent Two Octyl Formate

Highly Efficient Catalytic Production of Oximes from Ketones Using in Situ-Generated H<sub>2</sub>O<sub>2</sub>

Acetone oxidation using ozone on manganese oxide catalysts