Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

Epitaxial growth of Li2O2 achieved by a rational designed Fe3O4@N‐doped carbon nanoflower structure for improving the performance of Li‐O2 batteries

Controlled Growth of Li2o2 by Cocatalysis of Mobile Pd and Co3o4 Nanowire Arrays for High-Performance Li-O-2 Batteries

Efficient Fe3C-CF Cathode Catalyst Based on the Formation/Decomposition of Li2−xO2 for Li-O2 Batteries

Micro‑meso-macroporous FeCo-N-C Derived from Hierarchical Bimetallic FeCo-ZIFs As Cathode Catalysts for Enhanced Li-O2 Batteries Performance

Fe2O3 Nanoparticle Seed Catalysts Enhance Cyclability on Deep (dis)charge in Aprotic LiO2 Batteries

Realizing the Embedded Growth of Large Li2O2 Aggregations by Matching Different Metal Oxides for High-Capacity and High-Rate Lithium Oxygen Batteries

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

High rate and long cycle life in Li-O2 batteries with highly efficient catalytic cathode configured with Co3O4 nanoflower

Air activation enhances the porosity and N,O synergistic effect towards an efficient metal free carbon cathode for Li-O 2 battery

Heterostructured CoO-Co3O4 nanoparticles anchored on nitrogen-doped hollow carbon spheres as cathode catalysts for Li-O2 batteries

Highly-efficient MnO2/carbon Array-Type Catalytic Cathode Enabling Confined Li2O2 Growth for Long-Life Li–O2 Batteries

Synergistic structure of LiFeO2 and Fe2O3 layers with electrostatic shielding effect to suppress surface lattice oxygen release of Ni-rich cathode

Effect of oxygen adsorbability on the control of Li2O2 growth in Li-O2 batteries: Implications for cathode catalyst design

Molecular Sieve Induced Solution Growth of Li2O2in the Li-O2Battery with Largely Enhanced Discharge Capacity

Pt Nanoparticles Confined in a 3D Porous FeNC Matrix as Efficient Catalysts for Rechargeable Li-CO2/O2 Batteries

MOF-derived Co3O4 Nanoparticles Embedded in NiO Nanosheet Arrays As Heterostructure Cathode for Rechargeable Lithium-Oxygen Batteries

Configuration of Gradient-Porous Ultrathin FeCo2S4 Nanosheets Vertically Aligned on Ni Foam As a Noncarbonaceous Freestanding Oxygen Electrode for Lithium-Oxygen Batteries.

Ultrathin Porous NiCo2O4 Nanosheets for Lithium–Oxygen Batteries: an Excellent Performance Deriving from an Enhanced Solution Mechanism

Enhancing the Catalytic Activity of Co3O4 for Li–O2 Batteries Through the Synergy of Surface/Interface/Doping Engineering

Electron redistributed Ni-Co oxide nanoarray as an ORR/OER bifunctional catalyst for low overpotential and long lifespan Li-O2 batteries

3D web freestanding RuO2-Co3O4 nanowires on Ni foam as highly efficient cathode catalysts for Li-O2 batteries