Improvement in notch band characteristics of a hexagonal super wideband antenna by interfering back radiation out of phase with front radiation using frequency selective surface

Surajit Mukherjee,Avisankar Roy,Tapas Tewary,Kaushik Mandal,Partha Pratim Sarkar,Sunandan Bhunia
DOI: https://doi.org/10.1002/dac.5814
2024-04-30
International Journal of Communication Systems
Abstract:The antenna without embedding an FSS exhibits notch frequency gain of −2.6 dBi (measured), and after inclusion of an FSS layer behind the antenna, the notch frequency gain has been further reduced to −7.6 dBi (measured) due to the destructive interference between the reflected back radiations of the antenna by the FSS with the forward radiation of the antenna. Summary A band‐notched super wideband (SWB) planar monopole antenna with improved notch characteristics is proposed in this article. A hexagonal SWB antenna operating in the frequency range from 3.04 to 36 GHz is initially designed on Arlon substrate. The hexagonal patch is then loaded with optimum sized U‐shaped slot to eliminate WLAN band (5.15–5.85 GHz). The notch band's characteristics are further improved by incorporating a frequency selective surface (FSS) of a square array at a specific distance below the antenna to introduce a phase delay of 180° between the back radiation reflected by the FSS with the front radiation at the notched frequency. Improvement of notch band gain, efficiency, and antenna front‐to‐back ratio (FBR) are studied. The antenna without embedding an FSS exhibits working spectrum from 3.1 to 33.6 GHz with notch frequency gain of −2.6 dBi and efficiency 53%. The inclusion of an FSS layer at 25.2 mm behind the antenna results in notch frequency gain of −7.6 dBi with an efficiency of 23%. FBR improvement of about 16 dB is achieved at 8 GHz, and FBR is reduced by about 5 dB at the notch frequency. 169% fractional bandwidth with bandwidth dimension ratio (BDR) of 1622 is achieved in this proposed FSS integrated antenna. The inclusion of FSS to improve the band elimination performance represents the novelty of this proposal. The data are validated by electromagnetic simulation and physical measurement techniques.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?