Abstract:In this study, the method of fluidized incineration and water washing to recover hydrogen fluoride (HF) was proposed to dispose of high fluorine-containing organic waste. The resource utilization of the waste was investigated in a fluidized bed incinerator with a disposal capability of 10 t/d. The evolution characteristics of fluorine, operation conditions of the incineration system, absorption coefficient for HF by water washing, and HF corrosion during combustion were assessed. The results showed that HF and fluorocarbons were detected as the initial gaseous fluorides released during combustion. The release of HF could be divided into three stages, in which HF was generated from the volatilization of HF in the waste and the hydrolysis of fluorine in water-soluble salts (60–220 °C), oxidative decomposition of fluorinated organic components and residual carbon (220–800 °C), and hydrolysis of insoluble fluorinated inorganic minerals (800–1000 °C). Fluorocarbons could be destroyed through reactions with free radicals H, O, and OH or through single-molecule decomposition. Enhancing the temperature in the furnace and increasing the content of oxygen and hydrogen in the incineration materials were conducive to reducing the generation of fluorocarbons. By sampling and analyzing the bottom slag, bag filter ash and exhaust gas during the field test, the relevant pollutant discharge could meet the national emission standards. The waste heat utilization of high-temperature flue gas and the recovery of hydrofluoric acid and hydrochloric acid were realized. In the recovery of HF by water washing, the total absorption coefficients for 1# to 4# packed absorbers were 52.38 kg/(h m2), 39.96 kg/(h m2), 5.98 kg/(h m2) and 3.89 kg/(h m2), respectively. In the actual operation, alumina showed good corrosion resistance to high-temperature HF and could be used as bed materials or refractory materials. Low-temperature corrosion of HF occurred in the quenching heat exchanger, which was damaged after 6 months of continuous operation. High-temperature corrosion of HF occurred in the waste heat boiler. No significant corrosion was observed in the 24 months of operation.

Comprehensive utilization and treatment of fluorine-containing waste water arising from tantalum and niobium wet smelting

Removal of Fluoride from Geothermal Water by Waste-Synthesized Al(OH)3-HAP@ZMS Composite Adsorbent: Sorption Capability and Mechanism

Treatment Study of Fluoride Wastewater from Ore Decomposition Process of a Tantalum and Niobium Plant

Recovery and Preparation of Potassium Fluorotantalate from High-Tantalum-Bearing Waste Slag by Pressure Alkaline Decomposition

Selective recovery of niobium and tantalum from low-grade concentrates using a simple and fluoride-free process

Features of the extraction sulfuric acid-fluoride technology for processing niobium- and tantalum-containing raw materials

A fluoride-free liquid-liquid extraction process for the recovery and separation of niobium and tantalum from alkaline leach solutions

Combing Seeding Crystallization with Flotation for Recovery of Fluorine from Wastewater: Experimental and Molecular Simulation Studies

Leaching of mechanically activated niobium-tantalum ore in an alkaline hydrothermal system

Recovery of Tantalum from Waste Tantalum Capacitors by Supercritical Water Treatment

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Study on the resource utilization of high fluorine-containing organic waste through fluidized incineration

Extraction of uranium from solid waste containing uranium and fluorine

Enrichment of tantalum and niobium from tungsten residue by hydrochloric acid method

Internal coordination of vanadium industrial waste—Preparation of hydroxyapatite and fluorine wastewater purification

Design and Optimization of an Integrated UF-NF Membrane Process for Treating Rare Earth Refining Wastewater

A study on the Treatment of Hydrofluoric Acid Wastewater from Semiconductor Manufacturing Processes and the Possibility of Reuse of reclaimed water

Fluoride-Free Processing of Columbite Concentrate for Selective Recovery of Niobium and Tantalum Oxides

An integrated separation technology for high fluoride-containing wastewater treatment: Fluoride removal, membrane fouling behavior and control

Deep removal of fluoride from tungsten smelting wastewater by combined chemical coagulation-electrocoagulation treatment: From laboratory test to pilot test