Quasi-static crushing behavior of novel circular double arrowed auxetic honeycombs: Experimental test and numerical simulation
Feng Jiang,Shu Yang,Chen Ding,Chang Qi,Feng Jiang,Shu Yang,Chen Ding,Chang Qi
DOI: https://doi.org/10.1016/j.tws.2022.109434
2022-08-01
Abstract:Double arrowed honeycomb (DAH) is a typical auxetic material with negative Poisson’s ratio (NPR) and excellent mechanical properties, showing a wide application prospect in aerospace, marine, automotive and other fields. In this work, we introduce the double circular arc walls into the regular DAH unit cell to improve the strength and energy absorption capability of the material. According to the position of the arc wall, three circular double arrowed honeycomb (CDAH) unit configurations were proposed, including upper-circular (U-type), lower-circular (L-type), and full-circular (F-type). The prototype specimens of DAH and CDAHs were fabricated by 3D printing and tested under quasi-static crushing. The finite element (FE) models of the specimens were established and validated by the experimental results. The experimental and numerical results showed that the three types of CDAHs have higher crushing stress, crush force efficiency (CFE) and specific energy absorption (SEA) than the DAH with the same geometric parameters, which is due to the formation of more plastic hinges at the joints and the middle of the arc walls. Specifically, the CFE of L-type CDAH is 25.8% higher than that of DAH, and the SEA of F-type CDAH is 85.9% higher than that of DAH. The detailed parameter analyses of CDAH revealed that small short inclined wall angle and lower circular arc radius, and large friction coefficient value, long inclined wall angle and cell wall thickness all lead to large SEA. Among the three types of CDAH, the U-type has the greatest SEA and the most NPR effect under the same relative density. Finally, a wide range of SEA and Poisson’s ratio of the CDAH can be obtained by rationally designing the arc wall position and the geometric parameters of the unit cell.
engineering, mechanical,mechanics, civil