Abstract:Wind profiling within operating wind farms is important for both wind resource assessment and wind power prediction. With increasing wind turbine size, it is getting difficult to obtain wind profiles covering the turbine-affecting area due to the limited height of wind towers. In this study, a stepwise quality control and optimizing process for deriving high-quality near-surface wind profiles within wind farms is proposed. The method is based on the radial wind speed obtained by the Doppler Wind Lidar velocity-azimuth display (VAD) technique. The method is used to obtain the whole wind profile from ground level to the height affected by wind turbines within a utility-scale onshore wind farm, in northern China. Compared with the traditional carrier-to-noise ratio (CNR) filter-based quality control method, the proposed data processing method can significantly improve the accuracy of the derived wind. For a 10 m wind speed, an increase in coefficient of determination (R2) from 0.826 to 0.932, and a decrease in mean absolute error (MAE) from 1.231% to 0.927% are obtained; while for 70 m wind speed, R2 increased from 0.926 to 0.958, and MAE decreased from 1.023% to 0.771%. For wind direction, R2 increased from 0.978 to 0.992 at 10 m, and increased from 0.983 to 0.995 at 70 m. The optimized method also presents advantages in improving the accuracy of derived wind under complex wind environments, e.g., inside a wind farm, and increasing the data availability during clear nights. The proposed method could be used to derive wind profiles from below the minimum range of a vertically operating scanning Doppler Lidar to a height affected by wind turbines. Combined with Doppler beam-swinging (DBS) scanning data, the method could be used to obtain the complete wind profile in the boundary layer. These wind profiles could be further used to predict wind power and evaluate the climate and environmental effects of wind farms.

Study on Wind Resource Assessment Based on Refined Wind Measurement Data

An On-Site Measurement Coupled CFD Based Approach for Wind Resource Assessment over Complex Terrains.

Wind retrieval by using multi-scale dynamic region based on TREC method

High resolution wind resource assessment method based on mesoscale atmospheric model and CFD technology

Analysis of Wind Resource Characteristics in the Ulanqab Wind Power Base (Wind Farm): Mesoscale Modeling Approach

Wind Power Assessment Based on a WRF Wind Simulation with Developed Power Curve Modeling Methods

Study on Numerical Simulation of Wind Energy Resources Based on WRF and CFD Models

STUDY ON THE ASSESSMENT TECHNOLOGY OF WIND ENERGY RESOURCE

Wind resource assessment at mountainous wind farm: Fusion of RANS and vertical multi-point on-site measured wind field data

Study on the improvement of wind resources assessment method

Applying Satellite Data Assimilation To Wind Simulation Of Coastal Wind Farms In Guangdong, China

An Urban-Scale Method for Building Roofs Available Wind Resourceevaluation Based on Aerodynamic Parameters of Urban Sublayer Surfaces

Characterization of wind resource in China from a new perspective

A Regional Wind Energy Assessment Approach Using Average Wind Speed Participation Factor

Assessment Of China'S Offshore Wind Resources Based On The Integration Of Multiple Satellite Data And Meteorological Data

Near-Surface Wind Profiling in a Utility-Scale Onshore Wind Farm Using Scanning Doppler Lidar: Quality Control and Validation

A refined wind farm parameterization for the weather research and forecasting model

Wind resource assessment on complex terrain based on observations of a single anemometer

Assessment of Numerical Forecasts for Hub-Height Wind Resource Parameters during an Episode of Significant Wind Speed Fluctuations

Preliminary assessment of the wind power resource around the thousand-meter scale megatall building

Wind Resource Assessment Based on Numerical Simulations and an Optimized Ensemble System