Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Tuning the reactivity of Ni/MoS 2 membrane for efficient methane pyrolysis and hydrogen production: A multi-scale study

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

In-situ Synthesis of [ni(tzba)0.5(f)(bpy)] Membrane with High H2 Permeability Through Ultramicropores and Selective CO2 Adsorption with Strong Affinity of Uncoordinated N-Ni-F− Active Sites

Ternary NiMo-Bi liquid alloy catalyst for efficient hydrogen production from methane pyrolysis

Tuning reverse water gas shift and methanation reactions during CO2 reduction on Ni catalysts via surface modification by MoOx

Methane pyrolysis on NiMo/MgO catalysts: the significance of equimolar NiMo alloy resisting nanosize segregation during the reaction

Aerosol metal-organic framework-derived Ni–Zn–Al hybrid catalyst for efficient methane Bi-reforming

Coupling water splitting and partial oxidation of methane (POM) in Ag modified La0.8Ca0.2Fe0.94O3-δ hollow fiber membrane reactors for co-production of H2 and syngas

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Nanocomposite Ni/ZrO 2: Highly active and stable catalyst for H 2 production via cyclic stepwise methane reforming reactions

Ni-Based Molecular Sieves Nanomaterials for Dry Methane Reforming: Role of Porous Structure and Active Sites Distribution on Hydrogen Production

Plasma-catalytic CO2 methanation over Ni supported on MCM-41 catalysts: Effect of metal dispersion and process optimization

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Low temperature activation of methane to hydrogen depending on tailored electron transfer over Ni–Cr composite oxide

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Regulating N-Cu/MoxC Interfacial Effect Coupling Β-Mo2c/γ-moc Phase Engineering to Achieve Efficient Hydrolysis Dissociation and Methanol Dehydrogenation for Hydrogen Production

Enhanced Catalytic Performance of Nix-V@HSS Catalysts for the DRM Reaction: the Study of Interfacial Effects on Ni-VOx Structure with a Unique Yolk-Shell Structure

Visualizing the Birth and Monitoring the Life of a Bimetallic Methanation Catalyst

Atomically Dispersed Ni/-MoC Catalyst for Hydrogen Production from Methanol/Water

Methane Dry Reforming by Ni-Cu Nanoalloys Anchored on Periclase-Phase MgAlO<i><sub>x</sub></i> Nanosheets for Enhanced Syngas Production

Regeneration of methane splitting catalysts by interfacial hydrogenation