Abstract:Hybrid fuel cell and battery systems are currently among the most promising options for increasing the flight autonomy of unmanned aircraft systems. The ratio between the size of the battery and the fuel cell is a delicate issue in power system design. Both devices are necessary; the battery, with a quick response, to respond to demand peaks, and the fuel cell, with a slow dynamic response, but greater energy density, to increase its autonomy. One of the most important tasks in designing the hybrid system is selecting the appropriate size of each component so that it can respond to peak demands, extend its autonomy as far as possible and reduce its weight. The purpose of this research was to establish a design procedure for hybrid power systems for unmanned aerial systems, which means selecting the best size for each component. The hybrid system's modeling and the dynamic simulation of its response to demand curves are the foundation of this procedure. The simulation results include the consumption of the fuel cell as a function of time, the battery's charge status and an estimate of its autonomy for each demand curve. The analysis of the simulation results guides the choice of component size, adapting each one to achieve minimum fuel consumption for the characteristic demand curves for which the unmanned aircraft system is designed. After modeling the components of the hybrid system and describing the simulation procedure, this contribution proposes an example of a design for an unmanned aircraft system with a maximum takeoff weight of 20 kg. In this case, the most appropriate size for the fuel cell was 2000 W and a 3000 mAh 10S Lithium-Polymer battery. Fitted with a 12-liter hydrogen tank, stored at a maximum pressure of 300 bar, an estimated autonomy of 1.5 h can be expected.

Development of hybrid-powered, sustainable multi-purpose drone system: An analysis model

Power Management Strategy of Hybrid Fuel Cell Drones for Flight Performance Improvement Based on Various Algorithms

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Hybrid fuel cell powered drones energy management strategy improvement and hydrogen saving using real flight test data

Integrated Motion and Powertrain Predictive Control of Intelligent Fuel Cell/Battery Hybrid Vehicles

Performance evaluation and energy management strategy of drone methanol reforming fuel cell hybrid power system: A case study

Evaluation of a small drone performance using fuel cell and battery; Constraint and mission analyzes

A Review on Key Technologies and Developments of Hydrogen Fuel Cell Multi-Rotor Drones

Hybrid system for powering unmanned aerial vehicles: Demonstration and study cases

Advanced Sizing Methodology for a Multi-Mode eVTOL UAV Powered by a Hydrogen Fuel Cell and Battery

Optimization and Analysis of Hybrid Electric System for Distributed Propulsion Tilt-Wing UAV

Review of Latest Developments in PEM Fuel Cell Research with Application to Hydrogen Powered Drones

Design methodology and simulation analysis of hybrid fuel cell and battery systems for powering unmanned aircraft systems

Fuel Cell Propulsion Control System Based On PID Approaches

Fuel Cell Powered Drone: Use of Fuel Cells to Extend Multirotor Drone Endurance

The Application of Fuel-Cell and Battery Technologies in Unmanned Aerial Vehicles (UAVs): A Dynamic Study

Analysis of a hydrogen fuel cell-PV power system for small UAV

Adaptive hierarchical energy management strategy for fuel cell/battery hybrid electric UAVs

Compressed hydrogen storage in contemporary fuel cell propulsion systems of small drones

Simulation Approaches and Validation Issues for Open-Cathode Fuel Cell Systems in Manned and Unmanned Aerial Vehicles