Abstract:In this article, a second-order 3-D bandpass polarization-rotating surface (PRS) that can rotate vertically polarized incident waves by 90° and facilitate the output of horizontally polarized waves is presented. First, each PRS element is constructed using a pair of parallel-coupled slotline sections with open-short-ends, which are etched on vertically and horizontally inserted single-layer printed circuit boards (PCBs), respectively. Then, under vertically polarized incident waves, one of the slotline sections can convert the incident spatial waves into guided waves through its open end. After which, the guided waves are coupled to the other slotline section and the electric field direction will be rotated by 90° through the coupling path, thus leading to a 90° polarization rotation. Subsequently, a direct coupling matrix is used to synthesize and design the proposed PRS based on the microwave filter theory. Investigations reveal that a desirable bandpass filtering response can be obtained by properly designing the internal coupling of the parallel-coupled slotline sections and the external coupling between the incident spatial waves and the PRS. To validate the design concept, two examples with different fractional bandwidths at the same center frequency of 5 GHz and the same return loss of 20 dB were designed, fabricated, and measured. Consequently, a good agreement was attained among the results from coupling matrices, full-wave electromagnetic (EM) simulations, and measurements. All the results demonstrate that the proposed PRSs feature simple topologies, easy fabrications, low insertion losses (ILs), high polarization-rotating ratios, and stable filtering performances under large oblique incidences. In addition, our proposed method can be applied to design higher-order PRSs with sharpened out-of-band roll-off skirts.

Planar Polarization-Rotation Pattern Manipulation Surfaces with Patch-Microstrip Line-Patch Structure Under Different Incidences

Planar Polarization Rotation Pattern Manipulation Surfaces with Enhanced Incident Angle Range and Beam Steering Ability

Synthesis of 3-D Polarization-Rotating Surface Based on Orthogonally Inserted Parallel-Coupled Slotlines

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

3-D Pattern Modulation Surfaces Using Short-Circuited Slotline Structure: Proposal, Design, and Implementation

Single-Layer Dual-Frequency Planar Pattern Manipulation Surfaces Based on TM$_{02}$ Mode and TM$_{03}$ Mode of Patches

Phase modulation of metasurfaces for polarization conversion and RCS reduction

Design of Circular/Dual-Frequency Linear Polarization Antennas Based on the Anisotropic Complementary Split Ring Resonator

Reflective One-to-multi-polarization Conversion Via Separate Control of Phase and Magnitude

A 2-Bit Reconfigurable Metasurface with Real-Time Control for Deflection, Diffusion, and Polarization

Linear polarization to left/right-handed circular polarization conversion using ultrathin planar chiral metamaterials

Right-Hand/Left-Hand Circularly Polarized High-Gain Antennas Using Partially Reflective Surfaces

Wideband switchable linear polarization rotator based on metasurface

Metasurface-based broadband polarization-insensitive polarization rotator

Digital Polarization Programmable Metasurface for Continuous Polarization Angle Rotation and Radar Applications

Design and experimental demonstration of impedance-matched circular polarization selective surfaces with spin-selective phase modulations

Multifunctional Polarization Converters Based on Linear-to-Circular Polarization Decomposition Reflective Surfaces

Wideband and high efficient polarization conversion and RCS reduction based on compass needle shape metasurface

Manipulation of Arbitrary Polarizations and Phases Based on Metasurfaces

Electromagnetic Resonance Modification Technique for Optimization of Polarization Conversion Performance in Metastructures