Abstract:Drag reduction at the external surface of a cylinder in turbulent flows along the axial direction by circumferential wall motion is studied by direct numerical simulations. The circumferential wall oscillation can lead to drag reduction due to the formation of a Stokes layer, but it may also result in centrifugal instability, which can enhance turbulence and increase drag. In the present work, the Reynolds number based on the reference friction velocity and the nominal thickness of the boundary layer is 272. A map describing the relationship between the drag-reduction rate and the control parameters, namely, the angular frequency $\unicode[STIX]{x1D714}^{+}=\unicode[STIX]{x1D714}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}^{2}$ and the streamwise wavenumber $k_{x}^{+}=k_{x}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}$ , is obtained at the oscillation amplitude of ${A^{+}=A/u}_{\unicode[STIX]{x1D70F}0}=16$ , where $u_{\unicode[STIX]{x1D70F}0}$ is the friction velocity of the uncontrolled flow and $\unicode[STIX]{x1D708}$ is the kinematic viscosity of the fluid. The maximum drag-reduction rate and the maximum drag-increase rate are both approximately 48 %, which are respectively attained at $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})=$ (0.0126, 0.0148) and (0.0246, 0.0018). The drag-reduction rate can be scaled well with the help of the effective thickness of the Stokes layer. The drag increase is observed in a narrow triangular region in the frequency–wavenumber plane. The vortices induced by the centrifugal instability become the primary coherent structure in the near-wall region, and they are closely correlated with the high skin friction. In these drag-increase cases, the effective control frequency or wavenumber is crucial in scaling the drag-increase rate. As the wall curvature normalised by the boundary layer thickness becomes larger, the drag-increase region in the $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})$ plane as well as the maximum drag-increase rate also become larger. Net energy saving with a considerable drag-reduction rate is possible when reducing the oscillation amplitude. At $A^{+}=4$ , a net energy saving of 18 % can be achieved with a drag-reduction rate of 25 % if only the power dissipation due to viscous stress is taken into account in an ideal actuation system.

A new actuator disc model for oscillatory and steady flow that predicts reductions in jacket drag loads and enhancements in turbine power

Passive Flow Control Methods for Performance Augmentation in Air Turbines Used for Wave Energy Conversion—A Review

Hydrodynamic Coefficient Estimation for TLP and Spar Structures

Modelling the influence of streamwise flow field acceleration on the aerodynamic performance of an actuator disc

Assessment of actuator disc models in predicting radial flow and wake expansion

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Coupled unsteady actuator disc and linear theory of an oscillating foil propulsor

New Actuator Disk Model for Propeller-Aircraft Computation

Energy efficient actuated drag reduced compressible turbulent flat plate flow

Wake scaling of actuator discs in different aspect ratios

An energy-efficient pathway to turbulent drag reduction

Numerical investigation of the added mass effect of submerged blade disk structures: From simplified models to Francis turbine runners

Drag Reduction and Energy Saving by Spanwise Traveling Transversal Surface Waves for Flat Plate Flow

Natural Mode Splitting of a Rotating Disc in Water at Different Wall Distances As a Model for High-Head Francis Runners

Generalized analytical body force model for actuator disc computations of wind turbines

Development and assessment of an actuator volume method in rotating frame for predicting the flow-field of horizontal-axis wind turbines

Experimental validation of a linear momentum and bluff-body model for high-blockage cross-flow turbine arrays

Aerodynamic Modeling of Floating Vertical Axis Wind Turbines Using the Actuator Cylinder Flow Method

Power-generation enhancements and upstream flow properties of turbines in unsteady inflow conditions

Numerical Analysis of the Hydrodynamic Performance Impact of Novel Appendage on Rim-driven Thruster

Drag Reduction in Turbulent Flows along a Cylinder by Streamwise-Travelling Waves of Circumferential Wall Velocity