Abstract:To reveal the differences between the mechanical properties of solid waste coarse aggregate concrete and natural coarse aggregate concrete (NCAC) under equal strength, the basic mechanical properties of coarse aggregate concrete with seven different solid wastes (i.e., self-combusted coal gangue, uncombusted coal gangue, marble sheet waste, granite sheet waste, iron waste rock, recycled concrete, and self-combusted coal gangue ceramicite) were tested, and the trends in failure morphology, elastic modulus, and the stress–strain full curves of the different solid waste coarse aggregate concretes were analyzed and compared with NCAC. Finally, the interfacial structure of the concrete was characterized by SEM. The results showed that C30 strength grade concrete was prepared with different solid waste coarse aggregates; however, the 28 d compressive strength, split tensile strength, axial compression strength, flexural strength, and elastic modulus of the concrete was 35.26–47.35, 2.13–3.35, 26.43–42.70, 2.83–3.94, and 17.3–31.2, respectively. The modulus of elasticity of the solid waste coarse aggregate concrete was smaller than the NCAC under equal strength, with a maximum difference of 45%. The peak compressive strain and ultimate compressive strain were larger than the NCAC, with a maximum difference of 43%. The crushing value of the solid waste coarse aggregate affected the splitting tensile strength, flexural strength, and modulus of elasticity of the concrete to a greater extent than the compressive strength. The transition zone at the concrete interface of the coarse aggregates with different solid wastes varied widely. The porous micro-pumping effect of the self-combusted gangue and self-combusted gangue vitrified reinforced the concrete interface transition zone, and the polished surface of sheet waste, uncombusted gangue, and recycled concrete aggregate surface adhesion weakened the interface transition zone; Finally, the uniaxial compressive stress–strain curve model for concrete with different solid waste coarse aggregates was established based on the Guo Zhenhai model.

Effect of raw coal gangue coarse aggregates on mechanical properties and compressive stress–strain response of concrete

Utilization of raw coal gangue as coarse aggregates in pavement concrete

Influence of Construction Conditions on Properties of Recycled Concrete

Influence of Coal Gangue Powder on the Macroscopic Mechanical Properties and Microstructure of Recycled Aggregate Concrete

Comparative study on mechanical and environmental properties of coal gangue sand concrete

Influence of coarse coal gangue aggregates on elastic modulus and drying shrinkage behaviour of concrete

Mechanical Properties of Reactive Powder Concrete with Coal Gangue as Sand Replacement

Mechanical properties and microscopic characteristics of steel fiber coal gangue concrete

Mechanical Properties and Uniaxial Failure Behavior of Concrete with Different Solid Waste Coarse Aggregates

Experimental study on the physico-mechanical properties and microstructure of foam concrete mixed with coal gangue

Examination of Mixing Proportion in Self-Compacting Gangue-Based Pavement Concrete

Study of Mechanics and Durability of Non-Spontaneous Combustion Coal Gangue Coarse-Aggregate High-Performance Concrete

Compressive performance and stress-strain relationship of geopolymer recycled brick aggregate concrete

The Influence of Carbon Imperfections on the Physicochemical Characteristics of Coal Gangue Aggregates

Valorization of calcined coal gangue as coarse aggregate in concrete

Preparation of coal gangue ceramsite high-strength concrete and investigation of its physico-mechanical properties

Study on the Effect of Basalt Fiber Content and Length on Mechanical Properties and Durability of Coal Gangue Concrete

Deterioration mechanism of coal gangue concrete under the coupling action of bending load and freeze–thaw

Experimental Study on the Mechanical Properties of Disposable Mask Waste–Reinforced Gangue Concrete

Study on the Effect of Recycled Coarse Aggregate on the Shrinkage Performance of Green Recycled Concrete

Study on mechanical properties and microstructure of steel-polypropylene fiber coal gangue concrete