Abstract:ABSTRACT: The purpose of hydraulic barriers, such as geosynthetic clay liners (GCLs), is to isolate waste liquids from the environment. Bentonite clay is widely used in GCLs because of its elevated sealing capacity in the presence of water and its ability to restrict the migration of solutes (chemico-osmotic efficiency or semi-permeable membrane behaviour). However, exposure to high concentrations of inorganic solutions can change the clay fabric increasing its hydraulic conductivity and degrading its membrane behaviour, with a consequent harm to the environment. The aim of this research was to study the hydraulic and chemico-osmotic performance of amended clays. For this purpose, an engineered clay (HYPER clay) was developed through treatment of a natural bentonite with an anionic polymer and the results were compared with two amended clay materials (multi-swellable bentonite (MSB) and a dense prehydrated GCL (DPH GCL)). To demonstrate the potential benefits of polymer treatment, material characterisation through X-ray diffraction analysis, density of solid particles, Atterberg limits, and swelling tests was performed on treated and untreated samples. Subsequently, hydraulic conductivity and chemico-osmotic tests were performed with CaCl 2 solutions on treated and untreated clays, to evaluate the modified clays resistance to chemical attack. The results of this research showed that the present amendment technology has a great potential for future GCL applications. X-ray diffraction analysis demonstrated the intercalation of the polymer in the interlayer region of the clay inducing a dispersed clay structure. The swell index and the liquid limit of the clay increased with increasing polymer dosage suggesting a potential benefit of the polymer on preserving the hydraulic performance of the clay. Unlike the untreated clay, HYPER clay treatment maintained low hydraulic conductivity of the clay to CaCl 2 even in the long term and protected the clay against the destructive role of diffusion, maintaining the initial osmotic efficiency in the long term. Test results were also compared with other amended clays MSB and DPH GCL. These two amended clay materials displayed a chemico-osmotic behaviour at the steady state similar to that observed on untreated clay. On the other hand, the preservation of the chemico-osmotic efficiency of the HYPER clay with time suggests that the carboxymethyl cellulose was not flushed out during the long period of permeation with deionised water.

Polymer Treatment of Bentonite Clay for Contaminant Resistant Barriers

Polymer-treated bentonite clay for chemical-resistant geosynthetic clay liners

Long-Term Hydraulic Conductivity of a Bentonite-Polymer Composite Permeated with Aggressive Inorganic Solutions

Pore-scale mechanisms underlying the behavior of enhanced bentonites exposed to aggressive inorganic solutions

Polymer Fouling and Hydraulic Conductivity of Mixtures of Sodium Bentonite and a Bentonite-Polymer Composite

Hydraulic performance of activated calcium bentonite treated by polyionic charged polymer

Na-CMC-amended clay: effect of mixing method on hydraulic conductivity and polymer elution

Characterisation of bentonite polymer for bottom liner use

Novel composite polymer-amended bentonite for environmental containment: Hydraulic conductivity, chemical compatibility, enhanced rheology and polymer stability

Review of polymer-amended bentonite: Categories, mechanism, modification processes and application in barriers for isolating contaminants

Polymer Elution and Hydraulic Conductivity of Bentonite–Polymer Composite Geosynthetic Clay Liners

Study on Preparation of Polymer-Modified Bentonite and Sand Mixtures Based on Osmotic Pressure Principle

Polymer elution and hydraulic conductivity of polymer-bentonite geosynthetic clay liners to bauxite liquors

Morphological controls on flow conductivity and viscosity of bentonite-polymer composite

Effects of Biopolymers on the Liquid Limit and Undrained Shear Strength of Soft Clays

Improving membrane performance via bentonite polymer nanocomposite

Effect of Exopolymers on the Liquid Limit of Clays and Its Engineering Implications

Stimuli-Responsive Hybrid Polymer for Enhanced Solid-Liquid Separation of Industrial Effluents

Effect of super-absorbent polymer on swelling pressure of compacted bentonite infiltrated by alkaline solutions

Mesoscale Behavior of Montmorillonite Clay Modified by a Responsive Polymer

Enhanced Organic Contaminant Retardation by CTMAB-Modified Bentonite Backfill in Cut-Off Walls: Laboratory Test and Numerical Investigation