Abstract:This study presents a new ultra-high temperature composite fabricated by using zirconium diboride (ZrB2), silicon carbide (SiC), and tantalum carbide (TaC) with the volume ratios of 70%, 20%, and 10%, respectively. To attain this novel composite, an advanced processing technique of spark plasma sintering (SPS) was applied to produce ZrB2-SiC-TaC. The SPS manufacturing process was achieved under pressure of 30 MPa, at 2000 °C for 5 min. The micro/nanostructure and mechanical characteristics of the composite were clarified using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and nano-indentation. For further investigations of the product and its characteristics, X-ray fluorescence (XRF) analysis and X-ray photoelectron spectroscopy (XPS) were undertaken, and the main constituting components were provided. The composite was densified to obtain a fully-dense ternary; the oxide pollutions were wiped out. The mean values of 23,356; 403.5 GPa; and 3100 °C were obtained for the rigidity, elastic modulus, and thermal resistance of the ZrB2-SiC-TaC interface, respectively. To explore the practical application of the composite, the natural frequency of an aircraft wing considering three cases of materials: i) with a leading edge made of ZrB2-SiC-TaC; ii) the whole wing made of ZrB2-SiC-TaC; and iii) the whole wing made of aluminum 2024-T3 were investigated employing a numerical finite element model (FEM) tool ABAQUS and compared with that of a wing of traditional materials. The precision of the method was verified by performing static analysis to obtain the responses of the wing including total deformation, equivalent stress, and strain. A comparison study of the results of this study and published literature clarified the validity of the FEM analysis of the current research. The composite produced in this study significantly can improve the vibrational responses and structural behavior of the aircraft's wings.

Coupling bionic design and application of flow curved surface for carbon fiber composite fan blade

Containment Capability of 2D Triaxial Braided Tape Wound Composite Casing for Aero‐engine

MECHANICAL MODELLING OF A MULTI-LAYER PARALLEL PRE-COMPRESSED MFC BIMORPH MORPHING WING

Study on the mechanical properties and optimization methods of high-strength high-modulus carbon fibre composite with the cap structure

Fabrication and mechanical properties of CFRP honeycomb cylinder based on the transforming from the flat honeycombs

Bioinspired ultra-fine hybrid nanocoating for improving strength and damage tolerance of composite fan blades in flexible manufacturing

Design and Manufacturing of a Composite Lattice Structure Reinforced by Continuous Carbon Fibers

Optimization Design and Nonlinear Bending of Bio-Inspired Helicoidal Composite Laminated Plates

Constructing "nunchaku-like" multi-stage gradient interface via covalently grafting rigid-flexible-rigid structures onto carbon fibers: An effect strategy to improve interfacial properties of composites

Mechanical response analysis of the wide-chord hollow fan blade considering the fluid–structure interaction

Structural Optimization Design of CFRP with Ultrahigh In-Plane Thermal Conductivity and Mechanical Strength

Fabricating hollow turbine blades using short carbon fiber-reinforced SiC composite

Improved Manufacturing Method and Mechanical Performances of Carbon Fiber Reinforced Lattice-Core Sandwich Cylinder

The mortise and tenon structure enabling lamellar carbon composites of ultra-high bending strength

3D printing of topologically optimized wing spar with continuous carbon fiber reinforced composites

Manufacturing ZrB2-SiC-TaC Composite: Potential Application for Aircraft Wing Assessed by Frequency Analysis through Finite Element Model

Dual bionics of structure and preparation: Gradient architectured carbon/ceramic composite as light as water but bearing ultra-high temperature max to 2500 °C

Manufacturing and Testing of a CFRC Sandwich Cylinder with Kagome Cores

Mechanical properties and vibration characteristics of multiaxial carbon/glass hybrid fiber composites

Study on preparation and mechanical properties of bionic carbon fiber reinforced epoxy resin composite with eagle feather structure

A Design Feasibility Study of a Turbine Blade Disc Interface (Dovetail) Made By Four-Directional Braided Ceramic Matrix Composite (Sic/Sic)