Abstract:The concept of the "circular economy” aims to minimize waste generation, energy consumption, and CO2 emissions while maximizing the use of agricultural byproducts through economically viable approaches. In this research, coconut shell (CS), an agricultural waste was used to produce carbon composite materials via the hydrothermal carbonization (HTC) technique at a low temperature. A novel CS-based activated carbon (CSAC) for the adsorption of cationic dye was prepared by incorporating graphene oxide (GO), iron oxide, and undergoing alkaline activation. Characterization revealed a well-developed porosity (MCSACSBET: 477.74 m2/g, and MGOCSACSBET: 278.19 m2/g) through HTC method, KOH activation, and GO-iron oxide impregnation. FTIR analysis indicated that the CS derived activated carbon produced from coconut shells contains oxygen-containing functional groups, such as hydroxyl (-OH) and carbonyl (CO). These functional groups has the potential to change the polarity, surface energy, adsorption energy, and energy bands of carbon materials. Various operating parameters affecting the dye adsorption performance, such as initial pH, adsorbent dosage, contact time, and initial dye concentration, have been evaluated. The batch adsorption study revealed that GO and iron oxide functionalized CSAC (MGOCSAC) exhibited higher adsorption performance compared to iron oxide only functionalized CSAC (MCSAC) in COD removal, color removal, and adsorption capacity under the optimum conditions. Reusability studies further confirmed that MGOCSAC retained its high adsorption capacity, with only a 2.9% efficiency drop after five adsorption-desorption cycles. Conversely, MCSAC exhibited an 8.3% decrease, while commercial AC demonstrated a 19.2% reduction. Adsorption using both MCSAC and MGOCSAC was observed to follow the nonlinear Langmuir and Elovich models, which suggested a monolayer chemisorption. Quantum calculations highlighted potential binding interactions between the electron-withdrawing groups in adsorbents and the electron-donating groups in dye molecules, or vice versa. Furthermore, the total production cost of CS-based adsorbents was found to be 10.0%–17.0% less than commercial AC. Overall, the findings suggest that the hydrothermally carbonized and GO-iron oxide functionalized activated carbon derived from coconut shell provides an efficient, and cost-effective solution for dye removal given its simple preparation process, excellent adsorption capacity, ease of separation and high reusability ability.

Low‐Carbon‐Footprint Plasma‐Functionalized Coconut‐Coir‐Based Porous Carbon as an Efficient and Sustainable Adsorbent

Eco-Friendly High Microporosity Low Temperature Plasma Exposed Activated Carbon from Coconut Shell For nano Hybrid Super Capacitors

Co-pyrolysis and activation of microalgae and waste polypropylene in the synthesis of nitrogen doped and porous carbon for pollutant adsorption

New porous amine-functionalized biochar-based desiccated coconut waste as efficient CO2 adsorbents

Graphene oxide impregnated activated carbon derived from coconut shell through hydrothermal carbonization for cationic dye removal: Adsorptive performance, kinetics, and chemistry of interaction

Recent advances on the coconut shell derived carbonaceous material for the removal of recalcitrant pollutants: A review

In Situ Synthesis of Porous Carbons by Using Room-Temperature, Atmospheric-Pressure Dielectric Barrier Discharge Plasma as High-Performance Adsorbents for Solid-Phase Microextraction

Almond Skin Derived Porous Biocarbon Nanoarchitectonics with Tunable Micro and Mesoporosity for CO 2 Adsorption and Supercapacitors

Production of Hierarchically Porous Carbon from Natural Biomass Waste for Efficient Organic Contaminants Adsorption

Development of Uniform Porous Carbons From Polycarbazole Phthalonitriles as Durable CO2 Adsorbent and Supercapacitor Electrodes

Highly porous carbon derived from hydrothermal-pyrolysis synergistic carbonization of biomass for enhanced CO 2 capture

Hierarchical Porous Heteroatoms—Co-Doped Activated Carbon Synthesized from Coconut Shell and Its Application for Supercapacitors

Preparation of Phosphate-activated Carbon from the Coconut Fibers

Green fabrication of cost-effective and sustainable nanoporous carbons for efficient hydrogen storage and CO 2 /H 2 separation

Synthesis and Characterization of a Plasma Carbon Aerosol Coated Sponge for Recyclable and Efficient Separation and Adsorption

One-pot Synthesis of Ultrahigh Surface Area Porous Carbon from Coal Tar Residue: Characterization and Application in Phenol Removal

Facile Synthesis of Functionalized Porous Carbon by Direct Pyrolysis of Anacardium occidentale Nut-Skin Waste and Its Utilization towards Supercapacitors

Waste Biomass-Derived N, P Co-Doping Carbon Aerogel-Coated CoxFe1−xP with Modulated Electron Density for Efficient Electrooxidation of Contaminants

N-doped highly microporous carbon derived from the self-assembled lignin/chitosan composites beads for selective CO 2 capture and efficient p -nitrophenol adsorption

An environmentally friendly process to derive N/O/S-codoped porous carbon from biomass waste with high yield for high performance supercapacitor

Enhanced adsorption of micropollutants on oxygen plasma-modified carbon nanotubes (O-CNTs) under electrochemical assistance