Abstract:The efficient synthesis of quantum materials is becoming a research hotspot as it determines their successful application in the fields of biomedicine, illumination, energy, sensors, information, and communication. Among the quantum materials, it is still a challenge to synthesize quantum wires (QWs) with surfactants due to the inevitable radial growth of QWs in the soft template method. In this paper, amphipathic graphene oxide (GO) was adopted as a macromolecular surfactant to limit the radial growth instead of the commonly used surfactant. GO could roll up under its electrostatic interaction with a cuprous oxide (Cu<sub>2</sub>O) quantum dot (QD) and then form a tubular template for the growth of the Cu<sub>2</sub>O QW, which was named herein as the nanoparticle-induced graphene oxide rolling (NIGOR) procedure. The NIGOR procedure was confirmed by the molecular dynamics results by simulating systems consisting of GO and Cu<sub>2</sub>O nanoparticles. An intermediate with a necklace morphology corresponding to the simulation result was also observed experimentally during the formation of the QW. Meanwhile, the formation mechanism of the QW was demonstrated rationally. Furthermore, increasing the dosage of the reactant, reaction time, and temperature altered the diameter of the QW from 2 to 4 nm and also changed the morphology of the final products from a QD to a QW and then to a bundle of QWs. This was attributed to the aggregation of materials for the lowest surface energy in the system. Additionally, the universality of NIGOR was manifested <i>via</i> the synthesis of other metal oxides as well. The NIGOR strategy provided an alternative, convenient, and mass production method for synthesizing QWs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.1c00893?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c00893</a>.FESEM and TEM images of the purified materials with different centrifugal speeds (Figure S1); GO and Cu<sub>2</sub>O models before and after geometry optimization (Figure S2); XPS spectra of Cu<sub>2</sub>O QWs (Figure S3); and Cu<sub>2</sub>O materials synthesized with reduced GO (Figure S4) (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00893/suppl_file/ic1c00893_si_001.pdf">PDF</a>)Video S1: Molecular dynamics simulation of GO/Cu<sub>2</sub>O0 (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00893/suppl_file/ic1c00893_si_002.avi">AVI</a>)Video S2: Molecular dynamics simulation of GO/Cu<sub>2</sub>O1 (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00893/suppl_file/ic1c00893_si_003.avi">AVI</a>)Video S3: Molecular dynamics simulation of GO/Cu<sub>2</sub>O2 (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00893/suppl_file/ic1c00893_si_004.avi">AVI</a>)Video S4: Molecular dynamics simulation of GO/Cu<sub>2</sub>O3 (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00893/suppl_file/ic1c00893_si_005.avi">AVI</a>)This article has not yet been cited by other publications.
What problem does this paper attempt to address?
### Problems the Paper Aims to Solve
This paper aims to address the challenges of efficiently synthesizing quantum materials, particularly quantum wires. Specifically, the article focuses on how to use amphiphilic graphene oxide (GO) as a macromolecular surfactant to restrict the radial growth of quantum wires, thereby overcoming the inevitable radial growth issues in traditional soft template methods. By proposing a new synthesis strategy—nanoparticle-induced graphene oxide rolling (NIGOR) method, the authors hope to achieve precise control over the diameter and morphology of quantum wires, thus supporting their applications in fields such as biomedicine, lighting, energy, sensors, information, and communication.
### Background and Motivation
Quantum confinement effect (QCE) refers to the phenomenon where the continuous electronic energy levels near the Fermi level split into discrete levels when the geometric size of nanoparticles is reduced to the exciton Bohr radius of the bulk material. This effect becomes more pronounced as the dimension and size of quantum materials decrease. Therefore, it has been theoretically and experimentally proven that the QCE intensity of quantum dots (0D), quantum wires (1D), and quantum wells (2D) decreases in that order. Although quantum dots exhibit the most significant QCE among quantum materials, their size is constrained in all dimensions to the quantum scale, making it difficult to achieve characteristic lengths in microfabrication of electronic devices. In contrast, quantum wires, due to their extension in one specific dimension, can combine quantum material and device fabrication technologies, and their QCE is more significant than that of quantum wells. This makes quantum wires show great potential in fields such as electronics, photonics, and sensors.
### Existing Challenges
Currently, the main methods for synthesizing high-quality semiconductor quantum wires include microfabrication techniques, metal catalyst mediation, oriented attachment, and soft template strategies. These methods have their own advantages and disadvantages but generally face the following challenges:
1. **Microfabrication Techniques**: Although nanowires can be deposited on substrates through molecular beam epitaxy, the cross-sectional shape of the resulting quantum wires is irregular, and the diameter is uncontrollable, making them unsuitable for systematic scientific research.
2. **Metal Catalyst Mediation**: Including vapor-liquid-solid (VLS) and solution-liquid-solid (SLS) methods, where metal nanoparticle catalysts form eutectic droplets, followed by the precipitation of single-crystal wires. Although the growth of nanowires can be adjusted by controlling the size, nature, type, and composition of the eutectic, contamination from metal catalysts may alter the intrinsic properties of the quantum wires, and the VLS method is costly.
3. **Oriented Attachment**: Synthesis of nanowires through the recrystallization of spontaneously aligned nanocrystals along specific crystallographic directions can produce high-quality catalyst-free semiconductor single-crystal quantum wires, but usually requires a long synthesis time.
4. **Soft Template Strategy**: Widely used in the synthesis of anisotropic nanoparticles, where surfactants act as structure-directing agents, influencing the crystallization and growth of nanomaterials by altering the thermodynamic and kinetic processes in the synthesis system. However, surfactants may desorb from specific crystal faces during the reaction, leading to radial growth of the nanowires.
### Solution
This paper proposes the NIGOR strategy, utilizing amphiphilic graphene oxide (GO) as a macromolecular surfactant to restrict the radial growth of quantum wires through a nanoparticle-induced rolling process. The specific steps are as follows:
1. **Interaction between GO and Nanoparticles**: Molecular dynamics simulations verified that nanoparticles can induce GO to roll, forming tubular structures with nanoparticles encapsulated inside.
2. **Experimental Verification**: Using cuprous oxide (Cu₂O) nanoparticles as an example, the successful synthesis of polycrystalline Cu₂O quantum wires with controllable diameters and intermediate products was achieved experimentally. By changing the amount of reactants, the diameter of the quantum wires can be adjusted.
3. **Generality**: Further verification of the NIGOR strategy's generality in the synthesis of quantum wires of other metal oxides, such as zinc oxide (ZnO) and cadmium oxide (CdO).
### Conclusion
The NIGOR strategy provides a new, convenient, and suitable method for large-scale production of quantum wires with controllable diameters and morphologies. This method not only overcomes the limitations of existing synthesis methods but also offers new possibilities for the application of quantum wires in multiple fields.