Abstract:Traditional lung function detectors are based on measuring the changes in airflow and pressure during expiration and inspiration to evaluate the respiratory function of the subject. These techniques are mainly based on mechanical differential pressure sensors or turbine sensors which evaluate the lung function of the subject by measuring the ability of the subject to blow and inhale and determine their lung function parameters, including peak expiratory flow (PEF) and forced vital capacity (FVC). In this study, we present a wearable respiratory function testing system called the wearable respiratory spectrometer, which is developed based on dynamic humidity sensing technology. By exploring the principles and quantitative design of respiratory detection and conducting simulations of humidity sensors, we investigate the comprehensive characteristics of the system. According to Darcy’s law, the gas flow measured by the wearable respiratory spectrometer is directly proportional to the pressure difference inside and outside the device, showing that the system follows the differential pressure sensing principle. According to this basis and combining the structural characteristics of the system, we establish a quantitative relationship among PEF, FVC, and the changes in sensor electrical signals.The experimental results validate a linear positive correlation between the maximum rate of relative humidity change inside the spectrometer and PEF. Additionally, the results of simulated moisture volume experiments of the spectrometer show that in the measurement range from 180 to 840 L/min, the indication error of PEF is less than 10%, the adjacent test error is less than 5%, and the frequency response test error is less than 12%, which meet the industry standards for peak expiratory flow meters. Moreover, we compare the spectrometer with traditional portable lung function testing devices in simulated moisture volume experiments at different PEFs (300 to 720 L/min) and FVCs (3 to 6 L) . The results demonstrate that the average indication error of measured PEF and FVC by the spectrometer are about 0.35% and 0.23%, respectively, both are much lower than those of the portable lung function testing devices, thus fully verifying the accuracy and reliability of this system for real-time lung function assessment. Importantly, under simulated free-breathing conditions (PEF from 12 to 24 L/min, FVC from 0.5 to 0.7 L), the changes in the electrical signals of the spectrometer maintain a linear relationship with the moisture volume. Therefore, the wearable respiratory spectrometer can provide the long-term, free, dynamic, and quantitative monitoring of natural and weak nasal breathing. The measured respiratory spectra of subjects have great potential in real-time monitoring of lung function and remote monitoring of respiratory system diseases.

A novel adaptive filter with a heart-rate-based reference signal for esophageal pressure signal denoising

Removal of cardiac beat artifact in oesophageal pressure measurement by frequency analysis

The application of esophageal pressure measurement in patients with respiratory failure

Extraction of cardiac-related signals from a suprasternal pressure sensor during sleep

Towards Accurate, Cost-Effective, Ultra-Low-Power and Non-Invasive Respiration Monitoring: A Reusable Wireless Wearable Sensor for an Off-the-Shelf KN95 Mask

Wearable Cardiorespiratory Monitoring Employing a Multimodal Digital Patch Stethoscope: Estimation of ECG, PEP, LVET and Respiration Using a 55 mm Single-Lead ECG and Phonocardiogram

Estimation of the transpulmonary pressure from the central venous pressure in mechanically ventilated patients

Research on Denoising Algorithm of Thoracic Impedance Signal for Respiratory Monitoring During Running Exercise

Adaptive filtering for suppression of respiratory artifact in impedance cardiography

A novel method to quantify breathing effort from respiratory mechanics and esophageal pressure

[Research on portable airway impedance monitoring device based on expiratory oscillation]

A Wearable RF Sensor for Monitoring Respiratory Patterns

Wearable respiratory function detection system based on dynamic humidity sensing: principle and lung function detection

Neural Versus Pneumatic Control of Pressure Support in Patients with Chronic Obstructive Pulmonary Diseases at Different Levels of Positive End Expiratory Pressure: a Physiological Study

Quantitative validation of the suprasternal pressure signal to assess respiratory effort during sleep

Estimation of heart rate and respiratory rate by monitoring cardiopulmonary signals with flexible sensor

Non‐Invasive Flexible Electro‐Mechanical Sensors for Human Respiratory Monitoring and Chronic Disease Management

A Novel Adaptive Spectrum Noise Cancellation Approach for Enhancing Heartbeat Rate Monitoring in a Wearable Device

Wearable Respiratory Function Detection System Based on Dynamic Humidity Sensing: Principle and Experimental Comparison of Lung Function Detection

Removal of Motion Artifacts in PPG Signals Based on the CEEMDAN-MPE and VS_LMS Adaptive Filter

Speckle Vibrometry for Contactless Instantaneous Heart Rate and Respiration Rate Monitoring on Mechanically Ventilated Patients