Abstract:Around the world, there is a significant increase in the number of electric vehicles on the roads. Among the reasons are the aims to reduce the global dependency on oil as an energy source due to its political and economic dimensions especially for the non-oil producing countries by maximizing the use of electric vehicles. At the same time, it is also due to global concerns for the environmental aspect, especially global warming where transportation represents 30% of it. The battery is considered the main source of power for electric vehicles, but the battery tends to generate a significant amount of heat due to internal resistance during operation. The generated heat during the charging/discharging processes could lead to overheating in the battery which could end in battery failure. Therefore, dissipating the generated heat in the EV battery becomes essential through thermal management systems to ensure that the battery operates within a safe temperature range. Hence, the present study aims to introduce a new design of the liquid cooling system and also to investigate the effective parameter which affects its heat transfer performance. This paper is part of the overall study and describes the computational fluid dynamics by using ANSYS FLUENT software and numerical analysis to investigate the effect of the inlet/outlet arrangements on the heat transfer performance of a new LCP used for cooling the EV battery cell. There are three inlet/outlet arrangements: I-arrangement, Z-arrangement, and L-arrangement. The flow rate range of the present study is at the range of 0.4 – 1.6 l/min under 300 W heat flux. The L-arrangement has the best cooling performance compared to I-arrangement and Z-arrangement, where it achieves an average battery cell temperature which equals to 37.1 0C along flow rates, while it is at 43.3 0C and 38.0 0C for I-arrangement and Z-arrangement, respectively. The temperature uniformity for both L-arrangement and Z-arrangement is almost similar, and they achieved good temperature uniformity at all flow rates, while I-arrangement failed to achieve good temperature uniformity at the lowest flow rates.

Investigation of mixed convection of non-Newtonian fluid in the cooling process of lithium-ion battery with different outlet position

A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles

Effects of control volume outlet variation on axial air cooling of lithium-ion batteries

Numerical simulation of the effect of battery distance and inlet and outlet length on the cooling of cylindrical lithium-ion batteries and overall performance of thermal management system

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Numerical Simulation of Immersed Liquid Cooling System for Lithium-Ion Battery Thermal Management System of New Energy Vehicles

Effect of Different Inlet/Outlet Port Configurations on the Thermal Management of Prismatic Li-Ion Batteries

Effect of Air Inlet and Outlet Cross Sections on the Cooling System of Cylindrical Lithium Battery with Segmental Arrangement Utilized in Electric Vehicles

Heat transfer characteristics of liquid cooling system for lithium-ion battery pack

Modeling and Analysis of Heat Dissipation for Liquid Cooling Lithium-Ion Batteries

Numerical and experimental investigations on heat transfer characteristics and influencing factors of immersion cooling system for high-capacity prismatic lithium-ion battery

Design and Numerical Study of Microchannel Liquid Cooling Structures for Lithium Batteries

A numerical study of a novel centrally bifurcated mini-channel liquid cooling plate for enhanced heat transfer characteristics

Numerical Analysis of Flow Type and Direction on Single Phase Immersion Cooling for Li-ion Battery Thermal Management

Design and Simulation of Internal Flowing Twisted Conduits for Cooling of Lithium-Ion Batteries through Thermal Characterization

Numerical Simulations for Lithium-Ion Battery Pack Cooled by Different Minichannel Cold Plate Arrangements

Experimental Investigation on Pouch Lithium-ion Battery Thermal Management with Mini-Channels Cooling Plate Based on Heat Generation Characteristic

Experimental Study on Dielectric Fluid Immersion Cooling for Thermal Management of Lithium-Ion Battery

Improving lithium battery cooling: analyzing the impact of air flow, nanofluid flow, and phase change materials

Numerical Simulation on Heat Transfer Performance of a Liquid Cold Plate for Cooling of the Electric Vehicle Battery

Multi-objective optimization of liquid cold plate with v-shaped ribs for lithium-ion batterys