Construction of a lung cancer 3D culture model based on alginate/gelatin micro-beads for drug evaluation

Ziying Zhao,Xiaoqing Feng,Huijuan Wu,Shuisheng Chen,Changsong Ma,Ziyun Guan,Luwen Lei,Kejing Tang,Xiao Chen,Yong Dong,Yubo Tang

DOI: https://doi.org/10.21037/tlcr-24-490

2024-10-31

Translational Lung Cancer Research

Abstract:Keywords: 3D cell model; drug evaluation; cell culture

oncology,respiratory system

What problem does this paper attempt to address?

3D Microgroove Electrical Impedance Sensing to Examine 3D Cell Cultures for Antineoplastic Drug Assessment

Yuxiang Pan,Deming Jiang,Chenlei Gu,Yong Qiu,Hao Wan,Ping Wang

DOI: https://doi.org/10.1038/s41378-020-0130-x

2020-01-01

Microsystems & Nanoengineering

Abstract:In recent decades, three-dimensional (3D) cancer cell models have attracted increasing interest in the field of drug screening due to their significant advantages in more accurate simulations of heterogeneous tumor behavior in vivo compared to two-dimensional models. Furthermore, drug sensitivity testing based on 3D cancer cell models can provide more reliable in vivo efficacy prediction. The gold standard fluorescence staining is hard to achieve real-time and label-free viability monitoring in 3D cancer cell models. In this study, a microgroove impedance sensor (MGIS) was specially developed for the dynamic and noninvasive monitoring of 3D cell viability. 3D cancer cells were trapped in microgrooves with gold electrodes on opposite walls for in situ impedance measurement. The change in the number of live cells caused inversely proportional changes to the impedance magnitude of the entire cell/Matrigel construct and reflected the proliferation and apoptosis of the 3D cells. It was confirmed that the 3D cell viability detected by the MGIS was highly consistent with the standard live/dead staining by confocal microscope characterization. Furthermore, the accuracy of the MGIS was validated quantitatively using a 3D lung cancer model and sophisticated drug sensitivity testing. In addition, the parameters of the MGIS in the measurement experiments were optimized in detail using simulations and experimental validation. The results demonstrated that the MGIS coupled with 3D cell culture would be a promising platform to improve the efficiency and accuracy of cell-based anticancer drug screening in vitro.
Three-Dimensional Cell Culture with Alginate Hetero Gel Microspheres

Youping Gong,Jinlai Qi,Rougang Zhou,Honghao Chen,Junling He,Zizhou Qiao,Zhikai Bi,Huipeng Chen,Haiqiang Liu,Guojin Chen,Xiang Zhang,Huifeng Shao

DOI: https://doi.org/10.1115/msec2021-63242

2021-01-01

Abstract:In three-dimensional cell culture, key parameters such as cell concentration and material concentration may affect cell survival rate, proliferation and differentiation ability and other functional expression, which has very important practical significance, It has great research value in analytical chemistry, microarray, drug screening, tissue culture and so on. In this paper, the principle of active mixing is introduced for dynamic mixers. The moving parts are biocompatible mixers. Different components of alginate gel are mixed quickly in the mixing chamber, and finally the homogenized material is extruded through the replacement needle installed at the outlet of the mixing chamber. The feeding system is a push rod injection pump, and the linear motion of the injection pump is transformed into the liquid flow rate of the gel solution through a single chip microcomputer, and the flow feed is precisely controlled. In addition, by changing the flow rate ratio of the two components solution and the rapid mixing of the micro mixer, the real-time concentration change of the mixed material at the outlet can be realized, that is, gradient printing. In this paper, the printing method of gel microspheres is characterized by the distribution of the components in the Gel Microspheres according to any proportion, and because of the micro mixing process of micromixers, the demand for biological reagents and materials such as cells, proteins, cytokines and other materials is greatly reduced, which reduces the experimental cost and improves the feasibility of practical use.
3D Cell-Based Biosensor for Cell Viability and Drug Assessment by 3D Electric Cell/matrigel-Substrate Impedance Sensing.

Yuxiang Pan,Ning Hu,Xinwei Wei,Lin Gong,Bin Zhang,Hao Wan,Ping Wang

DOI: https://doi.org/10.1016/j.bios.2018.09.046

IF: 12.545

2018-01-01

Biosensors and Bioelectronics

Abstract:Preclinical efficacy and toxicity assessment of drug candidates plays a significant role in drug discovery and development. Traditional planar cell culture is a common way to perform the preclinical drug test, but it is difficult to correctly predict the drug efficacy and toxicity due to the simple two-dimensional (2D) extracellular microenvironment. Compared to the planar cell culture, three-dimensional (3D) cell culture system can better mimic the complex extracellular microenvironment where cells reside in the 3D tissues/organs in vivo. However, the conventional imaging techniques are difficult to achieve the dynamic and label-free monitoring of cellular behavior in thick sample by 3D cell culture. Here, 3D electric cell/matrigel-substrate impedance sensing (3D-ECMIS) is developed for real-time and non-invasive monitoring of 3D cell viability and drug susceptibility. In this study, human hepatoma cells (HepG2) are encapsulated in the matrigel scaffold and cultured in a 3D ECMIS chip which involves a pair of vertical golden electrodes on the opposite sidewalls of the culture chamber for the in-situ impedance measurement. Moreover, a portable multichannel system is developed to monitor the 3D cell/matrigel construct. The number of 3D-cultured cells was inversely proportional to the impedance magnitude of the entire cell/matrigel construct. Furthermore, anti-cancer drug screening will be conducted on the 3D-cultured cells when the cell proliferation reaches to a plateau phase. To validate the performance of 3D-ECMIS for the cell viability and drug susceptibility, the cell live/dead staining are utilized to confirm the results of drug susceptibility by this 3D-cell-based biosensor system. It is demonstrated that the 3D cell-based biosensor and 3D-ECMIS system will be a promising platform to improve the accuracy of cell-based anti-cancer drug screening in vitro.
In vitro construction of lung cancer organoids by 3D bioprinting for drug evaluation

Qianqian Dong,Qianqian Dong,Qianqian Dong,Xin Su,Xin Su,Xin Su,Xin Li,Huan Zhou,Honglei Jian,Shuo Bai,Jian Yin,Qingjun You,Qingjun You

DOI: https://doi.org/10.1016/j.colsurfa.2023.131288

2023-06-05

Abstract:The construction of tumor model plays a crucial role in preclinical drug evaluation. However, traditional two-dimensional (2D) monolayer cell models are unable to accurately predict drug activity in vivo, and animal models have species differences and ethical issues. Herein, a droplet-based 3D bioprinting strategy is established to construct lung cancer organoid arrays for drug evaluation. The bioink system is based on sodium alginate (SA, used to crosslink with Ca2+), hyaluronic acid (HA, used to improve gel viscoelasticity and printability), and arginine-glycine-aspartic acid peptide (RGD, used to improve cell adhesion). Hundreds of organoids with 3D multicellular spherical structures are produced in batches after post-printing culture. Compared with 2D monolayer culture models, 3D organoids show higher cell activity and functional expression of P-CK, ProSP-C, MUC1 and Caveolin-1, as well as higher anticancer drug resistance and IC50. This strategy will provide insights into the field of organoid modeling, high-throughput and personalized drug screening.

chemistry, physical
Tumor-like Lung Cancer Model Based on 3D Bioprinting

Xiong Wang,Xinzhi Zhang,Xingliang Dai,Xuanzhi Wang,Xinda Li,Jinfu Diao,Tao Xu

DOI: https://doi.org/10.1007/s13205-018-1519-1

IF: 2.893

2018-01-01

3 Biotech

Abstract:Currently, there is still a lack of appropriate in vitro model for studying lung cancers, especially for recapitulating their invasion and metastasis properties. To develop an appropriate in vitro model for lung cancer research, low-temperature molding principle of biological manufacturing and 3D bioprinting was used in this study to fabricate a cell-laden hydrogel grid scaffold structure, using gelatin-sodium alginate-lung cancer cell A549/95-D suspension as the bio-ink. Cells distributed evenly in this model with high viability, and can be cultured sustainably. This model can be cultured for up to 28 days and maintained its structural integrity. Histology, gene analysis, and scratch test showed that 3D printed cells had enhanced invasion and migration capability compared to those cultured in 2D environment, indicating that the in vitro model developed in this study was more biomimetic compared to 2D models, and it is highly valuable in biomedical research.
A Novel 3D in Vitro Tumor Model Based on Silk Fibroin/Chitosan Scaffolds To Mimic the Tumor Microenvironment

Jizhao Li,Yejuan Zhou,Weiliang Chen,Zhiqiang Yuan,Bengang You,Yang Liu,Shudi Yang,Fang Li,Chenxi Qu,Xuenong Zhang

DOI: https://doi.org/10.1021/acsami.8b10679

2018-10-16

Abstract:Drug development involves various evaluation processes to ascertain drug effects and rigorous analysis of biological indicators during in vitro preclinical studies. Two-dimensional (2D) cell cultures are commonly used in numerous in vitro studies, which are poor facsimiles of the in vivo conditions. Recently, three-dimensional (3D) tumor models mimicking the tumor microenvironment and reducing the use of experimental animals have been developed generating great interest to appraise tumor response to treatment strategies in cancer therapy. In this study, silk fibroin (SF) protein and chitosan (CS), two natural biomaterials, were chosen to construct the scaffolds of 3D cell models. Human non-small cell lung cancer A549 cells in the SF/CS scaffolds were found to have a great tendency to gather and form tumor spheres. A549 cell spheres in the 3D scaffolds showed biological and morphological characteristics much closer to the in vivo tumors. Besides, the cells in 3D models displayed better invasion ability and drug resistance than 2D models. Additionally, differences in drug-resistant and immune-related protein levels were found, which indicated that 3D models might resemble the real-life situation. These findings suggested that these 3D tumor models composed of SF/CS are promising to provide a valuable biomaterial platform in the evaluation of anticancer drugs.

materials science, multidisciplinary,nanoscience & nanotechnology
Thermo-Responsive Hydrogel Based on Lung Decellularized Extracellular Matrix for 3D Culture Model to Enhance Cancer Stem Cell Characteristics

Lei Chen,Fanglu Li,Ruobing Li,Ke Zheng,Xinyi Zhang,Huijing Ma,Kaiming Li,Lei Nie

DOI: https://doi.org/10.3390/molecules29184385

IF: 4.6

2024-09-15

Molecules

Abstract:Cancer stem cells (CSCs) are most likely the main cause of lung cancer formation, metastasis, drug resistance, and genetic heterogeneity. Three-dimensional (3D) ex vivo cell culture models can facilitate stemness improvement and CSC enrichment. Considering the critical role of extracellular matrix (ECM) on CSC properties, the present study developed a thermo-responsive hydrogel using the porcine decellularized lung for 3D cell culture, and the cell-laden hydrogel culturing model was used to explore the CSC characteristics and potential utilization in CSC-specific drug evaluation. Results showed that the lung dECM hydrogel (LEH) was composed of the main ECM components and displayed excellent cellular compatibility. In addition, lung cancer cells 3D cultured in LEH displayed the overexpression of metastasis-related genes and enhanced migration properties, as compared with those in two-dimensional (2D) conditions. Notably, the CSC features, including the expression level of stemness-associated genes, colony formation capability, drug resistance, and the proportion of cancer stem-like cells (CD133+), were also enhanced in 3D cells. Furthermore, the attenuation effect of epigallocatechin gallate (EGCG) on CSC properties in the 3D model was observed, confirming the potential practicability of the 3D culture on CSC-targeted drug screening. Overall, our results suggest that the fabricated LEH is an effective and facile platform for 3D cell culture and CSC-specific drug evaluation.

chemistry, multidisciplinary,biochemistry & molecular biology
Establishment of a Novel Model for Anticancer Drug Resistance in Three-Dimensional Primary Culture of Tumor Microenvironment

Tatsuya Usui,Masashi Sakurai,Shuhei Enjoji,Hideyoshi Kawasaki,Koji Umata,Takashi Ohama,Nobuyuki Fujiwara,Ryotaro Yabe,Shunya Tsuji,Hideyuki Yamawaki,Shoichi Hazama,Hiroko Takenouchi,Masao Nakajima,Ryouichi Tsunedomi,Nobuaki Suzuki,Hiroaki Nagano,Koichi Sato

DOI: https://doi.org/10.1155/2016/7053872

Abstract:Tumor microenvironment has been implicated in tumor development and progression. As a three-dimensional tumor microenvironment model, air liquid interface (ALI) organoid culture from oncogene transgenic mouse gastrointestinal tissues was recently produced. However, ALI organoid culture system from tissues of colorectal cancer patients has not been established. Here, we developed an ALI organoid model from normal and tumor colorectal tissues of human patients. Both organoids were successfully generated and showed cystic structures containing an epithelial layer and surrounding mesenchymal stromal cells. Structures of tumor organoids closely resembled primary tumor epithelium. Expression of an epithelial cell marker, E-cadherin, a goblet cell marker, MUC2, and a fibroblast marker, vimentin, but not a myofibroblast marker, α-smooth muscle actin (SMA), was observed in normal organoids. Expression of E-cadherin, MUC2, vimentin, and α-SMA was observed in tumor organoids. Expression of a cancer stem cell marker, LGR5 in tumor organoids, was higher than that in primary tumor tissues. Tumor organoids were more resistant to toxicity of 5-fluorouracil and Irinotecan than colorectal cancer cell lines, SW480, SW620, and HCT116. These findings indicate that ALI organoid culture from colorectal cancer patients may become a novel model that is useful for examining resistance to chemotherapy in tumor microenvironment.
Application of a Microfluidic Chip-Based 3D Co-Culture to Test Drug Sensitivity for Individualized Treatment of Lung Cancer.

Zhiyun Xu,Yanghui Gao,Yuanyuan Hao,Encheng Li,Yan Wang,Jianing Zhang,Wenxin Wang,Zhancheng Gao,Qi Wang

DOI: https://doi.org/10.1016/j.biomaterials.2013.02.045

2014-01-01

Experimental Pathology

Abstract:Individualized treatment is a promising clinical strategy for lung cancer, and drug sensitivity testing is fundamental to this scheme. We aimed to develop an effective drug sensitivity test platform to support individualized treatment. We designed a microfluidic chip-based, three-dimensional (3D) co-culture drug sensitivity test platform. A mono-lung cancer cell line, a mixture of lung cancer and stromal cell lines, and cells from fresh lung cancer tissues were cultured in 3D under continuous media supplementation, mimicking the actual tumor microenvironment in vivo. The cells were treated with anti-cancer drugs according to a gradient concentration generator inside the chips to screen the appropriate chemotherapy schemes. We successfully cultured cell lines or primary cells with this device. We also smoothly assayed the sensitivities of different anti-cancer drugs in parallel and accurately screened appropriate-dose, single and combined-drug chemotherapy schemes for eight patients. Our microfluidic device is a simple, reliable, and high-throughput platform to test drug sensitivity. It would be possible for chemotherapists to screen the appropriate chemotherapy schemes to guide individualized treatment in lung cancer.
Construction and Application of in vitro Alveolar Models Based on 3D Printing Technology

Tiankun Liu,Chang Zhou,Yongchun Shao,Zhuo Xiong,Ding Weng,Yuan Pang,Wei Sun

DOI: https://doi.org/10.1016/j.cjmeam.2022.100025

2022-06-01

Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers

Abstract:Increasing lung diseases, mutating coronaviruses, and the development of new compounds urgently require biomimetic in vitro lung models for lung pathology, toxicology, and pharmacology. The current construction strategies for lung models mainly include animal models, 2D cell culture, lung-on-a-chip, and lung organoids. However, current models face difficulties in reproducing in vivo-like alveolar size and vesicle-like structures, and are unable to contain multiple cell types. In this study, a strategy for constructing alveolar models based on degradable hydrogel microspheres is proposed. Hydrogel microspheres, 200–250 μm in diameter, were prepared using a self-developed printing technique driven by alternating viscous and inertial forces. Microcapsules were further constructed using a coacervation-based layer-by-layer technique and core liquefaction. Three types of cells were inoculated and co-cultured on hydrogel capsules based on optimized microcapsule surface treatment strategies. Finally, an in vitro three-dimensional endothelial alveolar model with a multicellular composition and vesicle-like structure with a diameter of approximately 230 μm was successfully constructed. Cells in the constructed alveolar model maintained a high survival rate. The LD50 values of glutaraldehyde based on the constructed models were in good agreement with the reference values, validating the potential of the model for future toxicant and drug detection.
Patient-Derived Lung Cancer "Sandwich Cultures" with a Preserved Tumor Microenvironment

Hailong Wang,Thorsten Walles,Cornelia Wiese-Rischke

DOI: https://doi.org/10.1089/ten.TEC.2023.0199

Abstract:In the past, different spheroid-, organotypic-, and three-dimensional (3D) bioprinting lung cancer models were established for in vitro drug testing and personalized medicine. These tissue models cannot depict the tumor microenvironment (TME) and, therefore, research addressing tumor cell-TME interactions is limited. To overcome this hurdle, we applied patient-derived lung tumor samples to establish new in vitro models. To analyze the tissue model properties, we established two-dimensional (2D) and 3D coculture tissue models exposed to static and dynamic culture conditions that afforded tissue culture for up to 28 days. Our tissue models were characterized by hematoxylin eosin staining, M30 enzyme-linked immunosorbent assay, and immunofluorescence staining against specific lung cancer markers (TTF-1 and p40/p63), cancer-associated fibroblast (CAF) markers (α-SMA and MCT4), and fibronectin (FN). The 3D models were generated with higher success rate than the corresponding 2D model. The cell density of the static 3D model increased from 21 to 28 days, whereas the apoptosis decreased. The dynamic 3D model possessed an even higher cell density than the static 3D model. We identified lung cancer cells, CAFs, and FN. Therefore, a novel in vitro 3D lung cancer model was established, which simulated the TME for 28 days and possessed a structural complexity.
Construction of 3D tumor in vitro models with immune microenvironment exhibited similar tumor properties and biomimetic physiological functionality

Yuhong Jiang,Lijuan Jin,Wenyu Liu,Hui Liu,Xiao Liu,Zhikai Tan

DOI: https://doi.org/10.1039/d4bm00754a

2024-11-02

Biomaterials Science

Abstract:Tumors pose a serious threat to people's lives and health, and the complex tumor microenvironment is the biggest obstacle to their treatment. In contrast to the basic protein matrices typically employed in 2D or 3D cell culture systems, decellularized extracellular matrix (dECM) can create complex microenvironments. In this study, a combination of physicochemical methods was establised to obtain liver decellularized extracellular matrix scaffolds (dLECMs) as scaffold to provide mechanical support and cell adhesion sites. By co-culturing tumor cells, tumor-associated stromal cells and immune cells, an in vitro 3D tumor model with an biomimetic immune microenvironment were constructed. By utilizing microenvironment data obtained from human liver tumor tissue and refining the double seeding modeling process, 3D in vitro liver tumor-like tissues with a tumor immune microenvironment (TIME) were obtained and designated as reconstructed human liver cancer (RHLC). These tissues demonstrated similar tumor characteristics and exhibited satisfactory physiological functionality. The results of metabolic characterisation and mouse tumorigenicity testing verified that the constructed RHLC significantly increased in vitro drug resistance while also closely mimicking in vivo tissue metabolism. This opens up new possibilities for creating effective in vitro models for screening chemotherapy drugs.

materials science, biomaterials
Towards a New 3Rs Era in the construction of 3D cell culture models simulating tumor microenvironment

Long Zhang,Weiqi Liao,Shimin Chen,Yukun Chen,Pengrui Cheng,Xinjun Lu,Yi Ma

DOI: https://doi.org/10.3389/fonc.2023.1146477

IF: 4.7

2023-04-04

Frontiers in Oncology

Abstract:Three-dimensional cell culture technology (3DCC) sits between two-dimensional cell culture (2DCC) and animal models and is widely used in oncology research. Compared to 2DCC, 3DCC allows cells to grow in a three-dimensional space, better simulating the in vivo growth environment of tumors, including hypoxia, nutrient concentration gradients, micro angiogenesis mimicism, and the interaction between tumor cells and the tumor microenvironment matrix. 3DCC has unparalleled advantages when compared to animal models, being more controllable, operable, and convenient. This review summarizes the comparison between 2DCC and 3DCC, as well as recent advances in different methods to obtain 3D models and their respective advantages and disadvantages.

oncology
3D Bioprinted GelMA/PEGDA Hybrid Scaffold for Establishing an In Vitro Model of Melanoma

Jiahui Duan,Yanyan Cao,Zhizhong Shen,Yongqiang Cheng,Zhuwei Ma,Lijing Wang,Yating Zhang,Yuchuan An,Shengbo Sang

DOI: https://doi.org/10.4014/jmb.2111.11003

2022-04-28

Journal of Microbiology and Biotechnology

Abstract:Due to the high incidence of malignant melanoma, the establishment of in vitro models that recapitulate the tumor microenvironment is of great biological and clinical importance for tumor treatment and drug research. In this study, 3D printing technology was used to prepare GelMA/PEGDA composite scaffolds that mimic the microenvironment of human malignant melanoma cell (A375) growth and construct in vitro melanoma micro-models. The GelMA/PEGDA hybrid scaffold was tested by the mechanical property, cell live/dead assay, cell proliferation assay, cytoskeleton staining and drug loading assay. The growth of tumor cells in two- and three-dimensional culture systems and the anti-cancer effect of luteolin were evaluated using the live/dead staining method and the Cell Counting Kit-8 (CCK-8) method. The results showed a high aggregation of tumor cells on the 3D scaffold, which was suitable for long-term culture. Cytoskeleton staining and immunofluorescent protein staining were used to evaluate the degree of differentiation of tumor cells under 2D and 3D culture systems. The results indicated that 3D bioprinted scaffolds were more suitable for tumor cell expansion and differentiation, and the tumor cells were more aggressive. In addition, luteolin was time- and dose-dependent on tumor cells, and tumor cells in the 3D culture system were more resistant to the drug.

biotechnology & applied microbiology,microbiology
Microfluidic Formation of Coculture Tumor Spheroids with Stromal Cells As a Novel 3D Tumor Model for Drug Testing

Qi Sun,Say Hwa Tan,Qiushui Chen,Rui Ran,Yue Hui,Dong Chen,Chun-Xia Zhao

DOI: https://doi.org/10.1021/acsbiomaterials.8b00904

2018-01-01

ACS Biomaterials Science & Engineering

Abstract:Three-dimensional (3D) tumor spheroids offer unprecedented capability for drug screening due to their unique features such as spatial 3D structure, relevant physiological responses, more complex intercellular network and stroma-cancer cell interactions. Microfluidic technology provides a facile strategy to make uniform tumor spheroids with potential of high-throughput production. In this article, we develop a microfluidic approach to produce core-shell alginate particles, which allows the separate confinement of different cells in the core and shell structure. To reconstitute the complex tumor structure, we encapsulated tumor cells in the core and stromal fibroblast cells in the shell. These co-culture tumor spheroids were applied for drug evaluation showing similar drug resistance as those prepared using conventional methods in well plates. These results demonstrated that our microfluidic approach are facile and versatile for making various tumor spheroids with uniform size but different components to be...
3D printing to construct in vitro multicellular models of melanoma

Shengbo Sang,Xiaoyuan Wang,Jiahui Duan,Yanyan Cao,Zhizhong Shen,Lei Sun,Qianqian Duan,Zixian Liu

DOI: https://doi.org/10.1002/bit.28429

IF: 3.8

2023-05-26

Biotechnology and Bioengineering

Abstract:Currently, there is a lack of suitable models for in‐vitro studies of malignant melanoma and traditional single cell culture models no longer reproduce tumor structure and physiological complexity well. The tumor microenvironment is closely related to carcinogenesis and it is particularly important to understand how tumor cells interact and communicate with surrounding nonmalignant cells. Three‐dimensional (3D) in vitro multicellular culture models can better simulate the tumor microenvironment due to their excellent physicochemical properties. In this study, 3D composite hydrogel scaffolds were prepared from gelatin methacrylate and polyethylene glycol diacrylate hydrogels by 3D printing and light curing techniques, and 3D multicellular in vitro tumor culture models were established by inoculating human melanoma cells (A375) and human fibroblasts cells on them. The cell proliferation, migration, invasion, and drug resistance of the 3D multicellular in vitro model was evaluated. Compared with the single‐cell model, the cells in the multicellular model had higher proliferation activity and migration ability, and were easy to form dense structures. Several tumor cell markers, such as matrix metalloproteinase‐9 (MMP‐9), MMP‐2, and vascular endothelial growth factor, were highly expressed in the multicellular culture model, which were more favorable for tumor development. In addition, higher cell survival rate was observed after exposure to luteolin. The anticancer drug resistance result of the malignant melanoma cells in the 3D bioprinted construct demonstrated physiological properties, suggesting the promising potential of current 3D printed tumor model in the development of personalized therapy, especially for discovery of more conducive targeted drugs.

biotechnology & applied microbiology
Establishment of an in Vitro Three-Dimensional Vascularized Micro-Tumor Model and Screening of Chemotherapeutic Drugs

Qian Ye,Juanru Wang,Boyang Wang,Min Zhao,Zhengsheng Wu,Xiaoli Liu

DOI: https://doi.org/10.1177/15330338241286755

Abstract:Breast cancer is the most common malignancy in women worldwide, and major challenges in its treatment include drug resistance and metastasis. Three-dimensional cell culture systems have received widespread attention in drug discovery studies but existing models have limitations, that warrant the development of a simple and repeatable three-dimensional culture model for high-throughput screening. In this study, we designed a simple, reproducible, and highly efficient microencapsulated device to co-culture MCF-7 cells and HUVECs in microcapsules to establish an in vitro vascularized micro-tumor model for chemotherapeutic drug screening. First, to construct a three-dimensional micro-tumor model, cell encapsulation devices were created using three different sizes of flat-mouthed needles. Immunohistochemistry and immunofluorescence assays were conducted to determine vascular lumen formation. Cell proliferation was detected using the Cell Counting Kit-8 assay. Finally, to observe the drug reactions between the models, anticancer drugs (doxorubicin or paclitaxel) were added 12 h after the two-dimensional cultured cells were plated or 7 days after cell growth in the core-shell microcapsules. Vascularized micro-tumors were obtained after 14 days of three-dimensional culture. The proliferation rate in the three-dimensional cultured cells was slower than that of two-dimensional cultured cells. Three-dimensional cultured cells were more resistant to anticancer drugs than two-dimensional cultured cells. This novel sample encapsulation device formed core-shell microcapsules and can be used to successfully construct 3D vascularized micro-tumors in vitro. The three-dimensional culture model may provide a platform for drug screening and is valuable for studying tumor development and angiogenesis.
Exploratory Evaluation of EGFR-Targeted Anti-Tumor Drugs for Lung Cancer Based on Lung-on-a-Chip

Jianfeng Tan,Xindi Sun,Jianhua Zhang,Huili Li,Jun Kuang,Lulu Xu,Xinghua Gao,Chengbin Zhou,Tan,Sun,Zhang,Li,Kuang,Xu,Gao,Zhou

DOI: https://doi.org/10.3390/bios12080618

2022-08-10

Biosensors

Abstract:In this study, we used three-dimensional (3D) printing to prepare a template of a microfluidic chip from which a polydimethylsiloxane (PDMS)lung chip was successfully constructed. The upper and lower channels of the chip are separated by a microporous membrane. The upper channel is seeded with lung cancer cells, and the lower channel is seeded with vascular endothelial cells and continuously perfused with cell culture medium. This lung chip can simulate the microenvironment of lung tissue and realize the coculture of two kinds of cells at different levels. We used a two-dimensional (2D) well plate and a 3D lung chip to evaluate the effects of different EGFR-targeting drugs (gefitinib, afatinib, and osimertinib) on tumor cells. The 3D lung chip was superior to the 2D well plate at evaluating the effect of drugs on the NCI-H650, and the results were more consistent with existing clinical data. For primary tumor cells, 3D lung chips have more advantages because they simulate conditions that are more similar to the physiological cell microenvironment. The evaluation of EGFR-targeted drugs on lung chips is of great significance for personalized diagnosis and treatment and pharmacodynamic evaluation.
A decellularized lung extracellular matrix/chondroitin sulfate/gelatin/chitosan-based 3D culture system shapes breast cancer lung metastasis

Le Wang,Jianye Yang,Xueyan Hu,Shuping Wang,Yanxia Wang,Tongyi Sun,Dan Wang,Wenchi Wang,Hailin Ma,Yingshuai Wang,Kedong Song,Wenfang Li

DOI: https://doi.org/10.1016/j.bioadv.2023.213500

Abstract:Distal metastasis of breast cancer is a primary cause of death, and the lung is a common metastatic target of breast cancer. However, the role of the lung niche in promoting breast cancer progression is not well understood. Engineered three-dimensional (3D) in vitro models capable of bridging this knowledge gap can be specifically designed to mimic crucial characteristics of the lung niche in a more physiologically relevant context than conventional two-dimensional systems. In this study, two 3D culture systems were developed to mimic the late stage of breast cancer progression at a lung metastatic site. These 3D models were created based on a novel decellularized lung extracellular matrix/chondroitin sulfate/gelatin/chitosan composite material and on a porcine decellularized lung matrix (PDLM), with the former tailored with comparable properties (stiffness, pore size, biochemical composition, and microstructure) to that of the in vivo lung matrix. The different microstructure and stiffness of the two types of scaffolds yielded diverse presentations of MCF-7 cells in terms of cell distribution, cell morphology, and migration. Cells showed better extensions with apparent pseudopods and more homogeneous and reduced migration activity on the composite scaffold compared to those on the PDLM scaffold. Furthermore, alveolar-like structures with superior porous connectivity in the composite scaffold remarkably promoted aggressive cell proliferation and viability. In conclusion, a novel lung matrix-mimetic 3D in vitro breast cancer lung metastasis model was developed to clarify the underlying correlativity between lung ECM and breast cancer cells after lung colonization. A better understanding of the effects of biochemical and biophysical environments of the lung matrix on cell behaviors can help elucidate the potential mechanisms of breast cancer progression and further improve target discovery of therapeutic strategies.
Three-dimensional breast cancer tumor models based on natural hydrogels: a review

Yan Shu,Bing Li,Hailin Ma,Jiaqi Liu,Yuen Yee Cheng,Xiangqin Li,Tianqing Liu,Chuwei Yang,Xiao Ma,Kedong Song

DOI: https://doi.org/10.1631/jzus.b2300840

2024-10-02

Journal of Zhejiang University SCIENCE B

Abstract:Breast cancer is the most common cancer in women and one of the deadliest cancers worldwide. According to the distribution of tumor tissue, breast cancer can be divided into invasive and non-invasive forms. The cancer cells in invasive breast cancer pass through the breast and through the immune system or systemic circulation to different parts of the body, forming metastatic breast cancer. Drug resistance and distant metastasis are the main causes of death from breast cancer. Research on breast cancer has attracted extensive attention from researchers. In vitro construction of tumor models by tissue engineering methods is a common tool for studying cancer mechanisms and anticancer drug screening. The tumor microenvironment consists of cancer cells and various types of stromal cells, including fibroblasts, endothelial cells, mesenchymal cells, and immune cells embedded in the extracellular matrix. The extracellular matrix contains fibrin proteins (such as types I, II, III, IV, VI, and X collagen and elastin) and glycoproteins (such as proteoglycan, laminin, and fibronectin), which are involved in cell signaling and binding of growth factors. The current traditional two-dimensional (2D) tumor models are limited by the growth environment and often cannot accurately reproduce the heterogeneity and complexity of tumor tissues in vivo. Therefore, in recent years, research on three-dimensional (3D) tumor models has gradually increased, especially 3D bioprinting models with high precision and repeatability. Compared with a 2D model, the 3D environment can better simulate the complex extracellular matrix components and structures in the tumor microenvironment. Three-dimensional models are often used as a bridge between 2D cellular level experiments and animal experiments. Acellular matrix, gelatin, sodium alginate, and other natural materials are widely used in the construction of tumor models because of their excellent biocompatibility and non-immune rejection. Here, we review various natural scaffold materials and construction methods involved in 3D tissue-engineered tumor models, as a reference for research in the field of breast cancer.

biochemistry & molecular biology,biotechnology & applied microbiology,medicine, research & experimental

Construction of a lung cancer 3D culture model based on alginate/gelatin micro-beads for drug evaluation

3D Microgroove Electrical Impedance Sensing to Examine 3D Cell Cultures for Antineoplastic Drug Assessment

Three-Dimensional Cell Culture with Alginate Hetero Gel Microspheres

3D Cell-Based Biosensor for Cell Viability and Drug Assessment by 3D Electric Cell/matrigel-Substrate Impedance Sensing.

In vitro construction of lung cancer organoids by 3D bioprinting for drug evaluation

Tumor-like Lung Cancer Model Based on 3D Bioprinting

A Novel 3D in Vitro Tumor Model Based on Silk Fibroin/Chitosan Scaffolds To Mimic the Tumor Microenvironment

Thermo-Responsive Hydrogel Based on Lung Decellularized Extracellular Matrix for 3D Culture Model to Enhance Cancer Stem Cell Characteristics

Establishment of a Novel Model for Anticancer Drug Resistance in Three-Dimensional Primary Culture of Tumor Microenvironment

Application of a Microfluidic Chip-Based 3D Co-Culture to Test Drug Sensitivity for Individualized Treatment of Lung Cancer.

Construction and Application of in vitro Alveolar Models Based on 3D Printing Technology

Patient-Derived Lung Cancer "Sandwich Cultures" with a Preserved Tumor Microenvironment

Construction of 3D tumor in vitro models with immune microenvironment exhibited similar tumor properties and biomimetic physiological functionality

Towards a New 3Rs Era in the construction of 3D cell culture models simulating tumor microenvironment

3D Bioprinted GelMA/PEGDA Hybrid Scaffold for Establishing an In Vitro Model of Melanoma

Microfluidic Formation of Coculture Tumor Spheroids with Stromal Cells As a Novel 3D Tumor Model for Drug Testing

3D printing to construct in vitro multicellular models of melanoma

Establishment of an in Vitro Three-Dimensional Vascularized Micro-Tumor Model and Screening of Chemotherapeutic Drugs

Exploratory Evaluation of EGFR-Targeted Anti-Tumor Drugs for Lung Cancer Based on Lung-on-a-Chip

A decellularized lung extracellular matrix/chondroitin sulfate/gelatin/chitosan-based 3D culture system shapes breast cancer lung metastasis

Three-dimensional breast cancer tumor models based on natural hydrogels: a review