Junjie Ding,Bohan Sang,Yanyi Wang,Miao Kong,Feng Wang,Bowen Zhu,Li Zhao,Wen Zhou,Jianjun Yu
Abstract:We experimentally demonstrated a 10-channel 50-GHz-grid wavelength division multiplexing (WDM) signal transmission over 400-km standard single-mode fiber (SSMF) with the net bit rate of 614.4 Gbpscarrier and the spectral efficiency (SE) of 12.288 bsHz, which is the highest SE for 256QAM to the best of our knowledge. Thanks to the joint pre-equalization and Volterra nonlinear equalization (VNLE), 49-Gbaud polarization division multiplexing (PDM) 256-ary quadrature amplitude modulation (256QAM) signal transmission with a novel constellation using probabilistic shaping (PS) and geometric shaping (GS) techniques is realized, considering the 0.828-normalized generalized mutual information (NGMI) low-density parity-check (LDPC) threshold with 25 overhead. Compared with the regular 256QAM at the same net bit rate, the designed hybrid PSGS 256QAM at the expense of 1-Gbaud increase in the symbol rate obtains 1.7-dB and 1.5-dB shaping gain in single-channel case and WDM case, respectively. Meanwhile, an improvement of at least 0.6-dB in optical signal to noise ratio (OSNR) over the hybrid PSGS 256QAM is achieved in comparison with PS-256QAM for both single-channel and WDM transmission.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is how to achieve higher spectral efficiency (SE) and better transmission performance in high - capacity, long - distance optical communication systems. Specifically, the article explores optimizing the 256QAM constellation by combining probability shaping (PS) and geometric shaping (GS) techniques when transmitting 10 - channel 50 - GHz - grid - spaced wavelength - division - multiplexing (WDM) signals over 400 - kilometer standard single - mode fiber (SSMF), thereby improving the spectral efficiency and noise - resistance ability of the transmission system.
### Main Problems
1. **Improving Spectral Efficiency**: Current high - speed, large - capacity optical transmission systems have high requirements for spectral efficiency. This paper aims to achieve higher spectral efficiency by using high - order modulation formats (such as 256QAM) and advanced signal - processing techniques.
2. **Optimizing Transmission Performance**: Traditional 256QAM signals are easily affected by nonlinear effects and noise during long - distance transmission, resulting in a decline in transmission performance. In this paper, by introducing probability - shaping and geometric - shaping techniques, a new type of hybrid PS/GS 256QAM constellation is designed to improve transmission performance.
3. **Coping with Nonlinear Effects**: During long - distance transmission, nonlinear effects in the fiber (such as self - phase modulation, cross - phase modulation, etc.) will seriously affect signal quality. In this paper, through the joint pre - equalization and Volterra nonlinear equalization (VNLE) techniques, these nonlinear effects are effectively compensated, and the robustness of the system is improved.
### Key Innovation Points
- **Hybrid PS/GS 256QAM Constellation**: By combining probability - shaping and geometric - shaping techniques, a new type of 256QAM constellation is designed, which can obtain higher spectral efficiency and better OSNR performance at the same net bit rate.
- **Improvement in Spectral Efficiency**: Experimental results show that this system achieves a spectral efficiency of 12.288 b/s/Hz, which is the highest value known so far under the 256QAM modulation format.
- **OSNR Gain**: Compared with traditional 256QAM, the hybrid PS/GS 256QAM obtains OSNR gains of 1.7 dB and 1.5 dB in single - channel and WDM cases respectively; compared with PS - 256QAM, it obtains OSNR gains of 0.8 dB and 0.6 dB in single - channel and WDM cases respectively.
### Summary
This paper successfully solves the problems of low spectral efficiency and poor transmission performance in high - capacity optical transmission systems by introducing the hybrid PS/GS 256QAM constellation and advanced signal - processing techniques, providing new ideas and technical support for the design of future high - speed, large - capacity optical communication systems.