Abstract:One of the main applications of ultrasonic melt treatment is the grain refinement of aluminium alloys. Among several suggested mechanisms, the fragmentation of primary intermetallics by acoustic cavitation is regarded as very efficient. However, the physical process causing this fragmentation has received little attention and is not yet well understood. In this study, we evaluate the mechanical properties of primary Al3Zr intermetallics by nano-indentation experiments and correlate those with in-situ high-speed imaging (of up to 1 Mfps) of their fragmentation process by laser-induced cavitation (single bubble) and by acoustic cavitation (cloud of bubbles) in water. Intermetallic crystals were chemically extracted from an Al-3wt% Zr alloy matrix. Mechanical properties such as hardness, elastic modulus and fracture toughness of the extracted intermetallics were determined using a geometrically fixed Berkovich nano-diamond and cube corner indenter, under ambient temperature conditions. The studied crystals were then exposed to the two cavitation conditions mentioned. Results demonstrated for the first time that the governing fragmentation mechanism of the studied intermetallics was due to the emitted shock waves from the collapsing bubbles. The fragmentation caused by a single bubble collapse was found to be almost instantaneous. On the other hand, sono-fragmentation studies revealed that the intermetallic crystal initially underwent low cycle fatigue loading, followed by catastrophic brittle failure due to propagating shock waves. The observed fragmentation mechanism was supported by fracture mechanics and pressure measurements using a calibrated fibre optic hydrophone. Results showed that the acoustic pressures produced from shock wave emissions in the case of a single bubble collapse, and responsible for instantaneous fragmentation of the intermetallics, were in the range of 20-40 MPa. Whereas, the shock pressure generated from the acoustic cavitation cloud collapses surged up to 1.6 MPa inducing fatigue stresses within the crystal leading to eventual fragmentation.

A Method of Images to Study Plate-Impact-Induced Cavitation in Aluminum through Molecular Dynamics Simulation

A Comprehensive Study of the Impact Pressure Induced by a Single Cavitation Bubble Collapsing Near a Solid Wall

On the governing fragmentation mechanism of primary intermetallics by induced cavitation

Atomic scale studies of spall behavior in nanocrystalline Cu

Coupling of dynamic ductile damage and melting in shock-induced micro-spalling: Modeling and applications

Enhanced spall strength of single crystal aluminum by temperature rise mitigation and structural phase transition under shock pulse

Interfacial cavitation

Spallation fracture dependence on shock intensity and loading duration in single-crystal aluminum

Understanding the spall behaviors of single crystalline aluminum under double decaying shock loadings: Atomistic simulations and theoretical models

Evolution of Preset Void and Damage Characteristics in Aluminum during Shock Compression and Release

Molecular dynamics simulation on spallation of [111] Cu/Ni nano-multilayers: Voids evolution under different shock pulse duration

Spallation Characteristics of Single Crystal Aluminum with Copper Nanoparticles Based on Atomistic Simulations

Experimental Study of the Spatial Discontinuity of Dynamic Damage Evolution

Cavitation in materials with distributed weak zones: Implications on the origin of brittle fracture in metallic glasses

The Shock-Induced Deformation and Spallation Failure of Bicrystal Copper with a Nanoscale Helium Bubble via Molecular Dynamics Simulations

Dynamic deformation of Al under shock loading

Atomistic simulation and continuum modeling of the dynamic tensile fracture and damage evolution of solid single crystalline Al with He bubble

Molecular Dynamics Simulations of Pre-Crack Effects on Deformation and Failure Mechanisms for Pure Aluminum

Shock responses of nanoporous aluminum by molecular dynamics simulations

Cooperative competition between melt-phase and void during micro-spallation and recompression

High speed imaging and numerical simulations of cavitation characteristic during the spreading of GaIn melt under ultrasonication