Abstract:The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm–1 K–1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm–1 K–1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish–kebabs," and hybrid Shish–kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.biomac.2c00067.DSC characterization, DMA characterization, rheological test characterization, FTIR characterization, and the relevant equations for calculating the crystallinity and thermal enhancement factor (PDF)This article has not yet been cited by other publications.

A method of forming composite structures using in situ-formed liquid crystal polymer fibers in a thermoplastic matrix

Rheology and Processing of High-Strength Liquid Crystal Polymer Reinforced Thermoplastic Composite Materials

Approaching Polycarbonate as an LFT-D Material: Processing and Mechanical Properties

Characteristics of in-situ automated fiber placement carbon-fiber-reinforced low-melt polyaryl ether ketone laminates part 1: Manufacturing influences

Synthetic/natural fiber combining action on mechanical performance of polypropylene composite made via compression mould route

The use of discontinuous PEEK/carbon fiber thermoplastic moulding compounds for thick-section componentry

The Preparation of Monomer Casting Polyamide 6/Thermotropic Liquid Crystalline Polymer Composite Materials with Satisfactory Miscibility

Three-Dimensional Printing of Shape Memory Liquid Crystalline Thermoplastic Elastomeric Composites Using Fused Filament Fabrication

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites via Constructing Multioriented Microstructures

Compression Molding of Low-Density Polyethylene Matrix/Glass-Fiber-Reinforced Thick Laminates

Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

Development of Recyclable and High-Performance In Situ Hybrid TLCP/Glass Fiber Composites

Role of Minor Phase Morphology on Mechanical and Shape-Memory Properties of Polylactide/Bio-Polyimide Nanocomposite

Increasing strength and ductility of extruded polylactic acid matrix composites using short polyester and continuous carbon fibers

Performance of polylactide biopolymer as matrix material for woven fiber composite laminates

Constructing a Rigid-and-Flexible Twin-Stage Gradient Interphase through Starlike Copolymer Coating on Carbon Fibers: A Route for Enhancing Interfacial Properties of Composites

Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface

Establishing interphase with "rigid-flexible coupling" crosslinking network by supramolecular structure to improve interfacial properties of high modulus carbon fiber reinforced polymer composites

Crystallization mechanism and mechanical properties of CF/PPS thermoplastic composites manufactured by laser-assisted automated fiber placement

Conventional and Microcellular Injection Molding of a Highly Filled Polycarbonate Composite with Glass Fibers and Carbon Black