Abstract:Silicon carbide (SiC) is a promising structural and cladding material for accident tolerant fuel cladding of nuclear reactor due to its excellent properties. However, when exposed to severe environments (e.g., during neutron irradiation), lattice defects are created in amounts significantly greater than normal concentrations. Then, a series of radiation damage behaviors (e.g., radiation swelling) appear. Accurate understanding of radiation damage of nuclear materials is the key to the design of new fuel cladding materials. Multi-scale computational simulations are often required to understand the physical mechanism of radiation damage. In this work, the effect of neutron irradiation on the volume swelling of cubic-SiC film with 0.3 mm was studied by using the combination of molecular dynamics (MD) and rate theory (RT). It was found that for C-vacancy (CV), C-interstitial (CI), Si-vacancy (SiV), Si-interstitial (SiI), and Si-antisite (SiC), the volume of supercell increases linearly with the increase of concentration of these defects, while the volume of supercell decreases linearly with the increase of defect concentration for C-antisite (CSi). Furthermore, according to the neutron spectrum of a certain reactor, one RT model was constructed to simulate the evolution of point defect under neutron irradiation. Then, the relationship between the volume swelling and the dose of neutrons can be obtained through the results of MD and RT. It was found that swelling typically increases logarithmically with radiation dose and saturates at relatively low doses, and that the critical dose for abrupt transition of volume is consistent with the available experimental data, which indicates that the rate theory model can effectively describe the radiation damage evolution process of SiC. This work not only presents a systematic study on the relationship between various point defect and excess volume, but also gives a good example of multi-scale modelling through coupling the results of binary collision, MD and RT methods, etc., regardless of the multi-scale modelling only focus on the evolution of primary point defects.

Effect of irradiation swelling on the mechanical properties of unidirectional SiC/SiC composites: A numerical investigation at microstructural level

Measurement of swelling-induced residual stress in ion implanted SiC, and its effect on micromechanical properties

A Multi-Scale Simulation Study of Irradiation Swelling of Silicon Carbide

Investigation of flexural behavior and microstructure of Amosic-3 silicon carbide composites under neutron irradiation

Insights at the neutron irradiation-induced structural homogenization effect of calcium silicate hydrates and degradation mechanism of mechanical properties: a molecular dynamics study

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Microstructural Evolution of Polymer Derived SiC Ceramics and SiC/SiC Composite under 1.8MeV Electron Irradiation

Effects of Irradiation on the Mechanical Behavior of Twined Sic Nanowires

Mechanical properties of 6H-SiC irradiated by neutron and MeV heavy ions: A nanoindentation and finite element method study

Mechanical and optical property assessment of irradiated SiC with displaced atoms

A concurrent irradiation-mechanics multiscale coupling model

Effect of Ion Irradiation on Nanoindentation Fracture and Deformation in Silicon Carbide

Evolution of structures and internal stress of ZrC-SiC composite under He ion irradiation and post-annealing

Effects of ion irradiation on microstructures and mechanical properties of SiOC nanocomposites

Numerical simulation of microstructural failure of natural fibre–hydrogel composites

Service characteristic evolution of three‐dimensional four‐directional braided C/SiC ceramic matrix composites under space electron radiation erosion environment

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Characterisation of damage evolution in plain weave SiC/SiC composites using in situ X-ray micro-computed tomography

Effect of CVI-induced porosity on elastic properties and mechanical behaviour of 2.5D and 3D Cf/SiC composites with multilayered interphase

A mean field homogenization model for the mechanical response of ceramic matrix composites