Abstract:Solid-state Li metal batteries are considered promising next-generation energy storage systems due to its exceptional advantages in terms of safety and high energy density. The continuous process on the development of solid-state fast ionic electrolytes enables the solid-state battery to operate at room temperature. Among these, sulfide-based solid electrolytes have attracted significant attentions due to their extremely high ionic conductivity, excellent deformability, and mild low-temperature processability. However, the full demonstration of practical batteries remains challenging due to the slow lithium-ion transport kinetics at working solid-solid interfaces. The sluggish interfacial transport kinetics mainly result from the poor solid-solid contacts, resulting in poor battery performance. Especially for solid-state pouch cells, the high local current due to the poor contact is amplified by the high working current, leading to rapid failure. Constructing fast ion transport paths between the Li metal anode and solid electrolyte interface is key for the practical application of solid-state batteries. Here a simple protocol was developed to realize fast ionic transportation by wetting the solid electrolyte/Li metal anode interface with localized high salt concentration liquid electrolyte. First, 3.5 mmol lithium trifluoroalfonylimide (LiTFSI) was added into 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (HFE) and dimethoxyethane (DME) mixed solvent, and stirred to obtain uniformly dispersed localized high-concentration liquid electrolyte, denoted as HFE-DME LiTFSI. The fluidity of liquid electrolyte ensures sufficiently conformal contacts between lithium anode and liquid electrolyte, as well as solid-state electrolyte and liquid electrolyte. Thus, fast ion transportation channels were constructed between the solid electrolyte and Li metal anode by wetting HFE-DME LiTFSI at a concentration of 3.0 mu L.cm(-2). After liquid phase therapy, the interfacial resistance of solid-state Li vertical bar Li4Ti5O12(LTO) pouch cell rapidly reduced from 4366 to 64 4 cm(-2) and even lower than the cell that was pressed at 3 MPa in the assemble process (340 Omega.cm(-2)). This suggests that the ion transport kinetics are significantly improved by liquid phase therapy. Therefore, the solid-state Li metal pouch cell with dimensions of 30 mm x 30 mm showed excellent cycling performances with specific capacities of 107 and 96 mAh.g(-1) at 0.1C and 0.5C, respectively. Furthermore, the solid-state Li-S pouch cell delivered capacities of 1100 and 932 mAh.g(-1) at 0.01C and 0.02C, respectively. This study demonstrates the effectiveness of the novel liquid phase therapy to construct fast ionic transportation channels, which providing an effective strategy for the practical application of solid-state Li metal pouch cells.

New Lithium Solid-State Batteries with Asymmetrical Polymer Nanocomposite Electrolyte and LiFePO4 Cathode, "Liquid Phase Therapy" Effect

Phase regulation enabling dense polymer-based composite electrolytes for solid-state lithium metal batteries

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Nafion-Based Quasi-Solid-State Polymer Electrolyte for Lithium-Sulfur Batteries

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Pendulum-swing coordination boosting "liquid-like" Li-ion conduction within asymmetric lamellar fillers for solid polymer electrolytes

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Liquid Phase Therapy with Localized High-Concentration Electrolytes for Solid-State Li Metal Pouch Cells

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Liberating Lithium Ions from Polymer Matrix via Harnessing Ion‐Dipole Interaction Toward Stable Solid‐State Lithium Metal Batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

A Locally Solvent-Tethered Polymer Electrolyte for Long-Life Lithium Metal Batteries

Regulation of Lithium‐Ion Flux by Nanotopology Lithiophilic Boron‐Oxygen Dipole in Solid Polymer Electrolytes for Lithium‐Metal Batteries

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

First-order goniospectrophotometric spectral modeling of isotropic and anisotropic colorant mixtures.