CO 2 capture using biochar derived from conditioned sludge via pyrolysis

Chang Liu,Chuan Fu,Tingzhen Li,Panyue Zhang,Yaping Xia,Yan Wu,Qiaojuan Lan,Yurong Li,Yuexin Zhang,Jiacheng Gui

DOI: https://doi.org/10.1016/j.seppur.2023.123624

IF: 8.6

2023-03-29

Separation and Purification Technology

Abstract:To reduce pollution and simultaneously mitigate carbon emission. Biochar samples were prepared via the pyrolysis of sludge after conditioning with K 2 FeO 4 and cationic polyacrylamide (CPAM) or chitosan (CTS), and their CO 2 capture performance was compared. The optimal preparation conditions were 600 °C and 80 mg/g dry solid (DS) for K 2 FeO 4 , 20 mg/L for CPAM, and 1 mg/g DS for CTS. The results showed that the CO 2 capture capacity of the biochar with K 2 FeO 4 (K 2 FeO 4 -B) increased from 75.69 mg/g to 81.68 mg/g compared to RSB, the CO 2 capture capacity of the biochar with PF + CPAM (K 2 FeO 4 -CPAM-B) was 94.81 mg/g, and the CO 2 capture capacity of the biochar with PF + CTS (K 2 FeO 4 -CTS-B) was 86.56 mg/g. The CO 2 capture capacity of the biochar (K 2 FeO 4 -CTS-B) was 86.56 mg/g. The main reason for this improved capacity is that the addition of K 2 FeO 4 and CPAM enhanced chemical properties of the biochar surface (carbon content, N–H content, etc .). Additionally, the biochar conditioned with K 2 FeO 4 and CPAM demonstrated better cyclic adsorption performance and economic efficiency than the other samples. It has the prospect of engineering application. This study provides a reference for the selection of conditioning agents for wastewater treatment plants and a new solution for sludge disposal.

engineering, chemical