Abstract:A numerical investigation is performed into the mixing characteristics of electrokinetically-driven non-Newtonian fluids in microchannels containing patterned blocks. In performing the simulations, the rheological behavior of the fluid is described using a power-law model. Two different types of patterned blocks are considered, namely rectangular and wavy. The effects of the geometry parameters of the patterned blocks and the flow behavior index in the power-law model on the mixing efficiency within the microchannel are systematically explored. The results show that the rectangular patterned blocks yield a better mixing performance than the wavy patterned blocks. However, for both types of block, the mixing efficiency can be improved by increasing the width and length of the blocks and extending the total length of the block region. In addition, the results show that the flow behavior index in the power-low model has a significant effect on the mixing performance. Specifically, the volumetric flow rate increases with a decreasing flow behavior index, and therefore results in a poorer mixing performance. It is shown that a heterogeneous patterning of the zeta potential on the upper surfaces of the rectangular and wavy blocks prompts the formation of local flow recirculations, and therefore improves the mixing efficiency. In addition, it is shown that the mixing performance improves with an increasing magnitude of the heterogeneous surface zeta potential. Overall, the results show that the mixing efficiency of non-Newtonian fluids with a low flow behavior index can be improved by utilizing blocks with an appropriate geometry, applying a heterogeneous distribution of the surface zeta potential, and increasing the magnitude of the zeta potential.

A combined active/passive scheme for enhancing the mixing efficiency of microfluidic devices

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Mixing in T-shaped Micro-Channel Network

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Electrokinetically-driven flow mixing in microchannels with wavy surface

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channel

Mixing in microfluidic devices and enhancement methods

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Enhancement of the mixing efficiency of double T-shaped micromixers using a combined passive scheme

An Enhanced One-Layer Passive Microfluidic Mixer with an Optimized Lateral Structure with the Dean Effect

Mixing Enhancement of a Passive Micromixer with Submerged Structures

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Passive Mixing and the Flow Characteristic of a H-Type Microchannel

Enhancement of passive mixing via arc microchannel with sharp corner structure

Passive and Active Mixing in Microfluidic Devices

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Mixing enhancement of electrokinetically-driven non-Newtonian fluids in microchannel with patterned blocks

Study on the mixing of fluid in curved microchannels with heterogeneous surface potentials

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel