Abstract:Developing structure optimization methods is critical for the design of more effective convective heat transfer channels. This paper proposes a new structure optimization method that can directly design the optimal rib structure under optimization targets and constraints. This method sets up the gradients between the objective functions and optimization variables by numerical differentiation, uses the Brinkman penalty method to generate the solid in the fluid domain, and obtains the optimal solution by the gradient descent method. When optimizing the rib structure, this method only considers the growth of the rib structure on the fluid-solid boundary and simplifies the 3D rib structure optimization into 2D rib height distribution, significantly reducing the computational load. The advantage of this method lies in its high flexibility and applicability to different objective functions and constraint conditions. It is first applied to the rib structure optimization of unilateral-heated channels under a periodic flow with the minimum average temperature of the heated surface as the optimization target. Optimization examples on the optimal average temperature of three solid materials, TC4, SS, and Al demonstrate decreases of 26.9%, 26.9%, and 27.3%, respectively, compared with the initial average temperature. Then, in the optimization with the target of minimum maximum temperature on the heated surface under a periodic flow, the obtained optimal rib structure reduces the maximum temperature from 400.4 K to 329.6 K, a 17.7% decrease. Given the comprehensive heat transfer coefficient (PEC) as the optimization target and constraining the mass flow, the optimized PEC can reach 2.4 at Re = 700. This method can be extended to optimal rib heat transfer structure design with different constraints, such as total rib volume, flow rate, pump power, etc., and with different optimization targets, such as Nusselt number, flow resistance, minimum maximum temperature, minimum temperature difference, etc.

Multi-objective optimization of a bidirectional-ribbed microchannel based on CFD and NSGA-II genetic algorithm

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Heat Transfer Enhancement in Microchannel Heat Sink with Bidirectional Rib

Multi-Objective Optimization of a Microchannel Heat Sink Combining Cavities and Longitudinal Vortex Generators Based on Cfd and Nsga-Ii Genetic Algorithm

Multi objective optimization of a micro-channel heat sink through genetic algorithm

Multi-Objective Optimization on the Geometrical Parameters of a Nanofluid-Cooled Rectangular Microchannel Heat Sink

Swarm-based multi-objective optimization of double-layered microchannel heat sink with hybrid solid-porous ribs

Multi-objective optimization of thermal-hydraulic performance in a microchannel heat sink with offset ribs using the fuzzy grey approach

Multi-objective hydrothermal performance optimization of a microchannel heat sink equipped with delta winglet vortex generators using NSGA-II genetic algorithm

Mathematical modeling and multi-objective optimization on the rectangular micro-channel heat sink

Multi-objective optimization of a hybrid microchannel heat sink combining manifold concept with secondary channels

Numerical analysis on thermal-hydraulic performance of optimized microchannel heat sink with slant ribs and quatrefoil rib-elliptical groove complex structures

Numerical Optimization of Design Parameters for a Modified Double-Layer Microchannel Heat Sink

Multi-objective Parameter Optimization Design of Tapered-Type Manifold/variable Cross-Section Microchannel Heat Sink

Multi-parameters Optimization for Microchannel Heat Sink Using Inverse Problem Method

Machine Learning Assisted Microchannel Geometric Optimization—A Case Study of Channel Designs

Structure optimization method on heat convection enhancement of unilateral-heated channel using gradient descent

Experimental and Numerical Investigation of a Microchannel Heat Sink (MCHS) with Micro-Scale Ribs and Grooves for Chip Cooling

Multi-Objective Optimization Design of a Cobweb-Like Channel Heat Sink Using Particle Swarm Algorithm

Shape optimization of inlet header of microchannel heat sink using surrogate model combined with genetic algorithm

Improvement of flow and heat transfer performance of microchannels with different ribs using topology optimization