Abstract:Independent light propagation through one or multiple modes is commonly considered as a basic demand for mode manipulation in few-mode fiber (FMF)- or multimode fiber (MMF)-based optical systems such as transmission links, optical fiber lasers, or distributed optical fiber sensors. However, the insertion of doped-fiber amplifiers always kills the entire effort by inducing significant modal crosstalk. In this paper, we propose the design of doped-fiber amplifiers in FMF-based systems adopting identical multiple-ring-core (MRC) index profiles for both passive and doped fibers to achieve low modal crosstalk. We develop the direct-glass-transition (DGT) modified chemical vapor deposition (MCVD) processing for precise fabrication of few-mode erbium-doped fibers (FM-EDFs) with MRC profiles of both refractive index and erbium-ion doping distribution. Then, a few-mode erbium-doped-fiber amplifier (FM-EDFA) with a maximum gain of 26.08 dB and differential modal gain (DMG) of 2.3 dB is realized based on fabricated FM-EDF matched with a transmission FMF supporting four linearly polarized (LP) modes. With the insertion of the FM-EDFA, 60 + 60 km simultaneous LP01/LP11/LP21/LP02 01 / LP 11 / LP 21 / LP 02 transmission without inter-modal multiple-input multiple-output digital signal processing (MIMO-DSP) is successfully demonstrated. The proposed design of low-modal-crosstalk doped-fiber amplifiers provides, to our knowledge, new insights into mode manipulation methods in various applications. (c) 2024 Chinese Laser Press

Investigation of the confined-doped fiber on single-mode operating and power scaling in all-fiber single-frequency amplifiers

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

435 W single-frequency all-fiber amplifier at 1064 nm based on cascaded hybrid active fibers

Study of mode propagation with 632.8-nm laser in tapered fiber

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Theoretical and experimental investigation on the gain filtering effect in the high-power fiber oscillator using confined-doped fiber

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

Low-modal-crosstalk Doped-Fiber Amplifiers in Few-Mode Fiber-Based Systems

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

kW-class high power fiber laser enabled by active long tapered fiber

3 Kw Narrow-Linewidth All-Fiber Amplifier with Near Diffraction Limited Beam Quality