Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Optimization of Fenton process on removing antibiotic resistance genes from excess sludge by single-factor experiment and response surface methodology

More Effective Removal of Antibiotic Resistance Genes from Excess Sludge by Microwave Integrated Fenton Treatment

Simultaneous removal of antibiotic resistance genes and improved dewatering ability of waste activated sludge by Fe(II)-activated persulfate oxidation

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Aerobic SMBR/reverse Osmosis System Enhanced by Fenton Oxidation for Advanced Treatment of Old Municipal Landfill Leachate

Reduction of antibiotic resistance genes in municipal wastewater effluent by advanced oxidation processes.

Simultaneous Elimination of Sulfamethoxazole, Antibiotic-Resistant Bacteria and Resistance Genes by Mgfe2o4/Mgo Modified Biochar Activated Peroxymonosulfate: Performance, Mechanism and Application Potential

Reduction of Typical Antibiotic Resistance Genes and Mobile Gene Elements in Sewage Sludge During Sludge Bioleaching with Acidithiobacillus ferrooxidans

Removal Of Intracellular And Extracellular Antibiotic Resistance Genes From Swine Wastewater By Sequential Electrocoagulation And Electro-Fenton Processes

Efficient reduction of antibiotic resistance genes and mobile genetic elements in organic waste composting via fenton-like treatment

Optimization of biological enzymes combined with Fe2+-activated advanced oxidation process for waste activated sludge conditioning using the response surface method

Elimination of antibiotic resistance genes in waste activated sludge by persulfate treatment during the process of sludge dewatering

Integrated AI-driven optimization of Fenton process for the treatment of antibiotic sulfamethoxazole: Insights into mechanistic approach

Source Prevention of Halogenated Antibiotic Resistance Genes Proliferation: UV/sulfite Advanced Reduction Process Achieved Accurate and Efficient Elimination of Florfenicol Antibacterial Activity

Effects of persulfate treatment on the fates of antibiotic resistance genes in waste activated sludge fermentation process and the underlying mechanism

Influence of cell lysis by Fenton oxidation on cryptic growth in sequencing batch reactor (SBR): Implication of reducing sludge source discharge

Distinct effects of typical sludge pretreatment approaches on the antibiotic resistance genes variations, associated bacterial community dynamics and metabolic activities during anaerobic fermentation process

Removal of veterinary antibiotics from sequencing batch reactor (SBR) pretreated swine wastewater by Fenton's reagent

Optimization of Domestic Waste Leachate Combined Treatment Process with Oxidant and Coagulant by Using Response Surface Methodology

New methods for quantification of Fenton’s reagent addition based on aged sludge indicators to improve filterability

Simultaneous Removal of Antibiotics and Antibiotic Resistance Genes from Pharmaceutical Wastewater Using the Combinations of Up-Flow Anaerobic Sludge Bed, Anoxic-Oxic Tank, and Advanced Oxidation Technologies