Abstract:Digital microfluidics (DMF) is a platform that enables the automated manipulation of individual droplets of sizes ranging from nano- to microliter and can be coupled with numerous techniques, including colorimetry. However, although DMF electrode architecture is highly versatile, its integration with different analytical methods often requires either changes in sample access, top plate design, or the integration of supplementary equipment into the system. As an alternative to overcome these challenges, this study proposes a simple integration between paper-based analytical devices (PADs) and DMF for automated and eco-friendly sample processing aiming at the colorimetric detection of creatinine (an important biomarker for kidney disease) in artificial urine. Optimized and selective Jaffé reaction was performed on the device, and reaction products were delivered to the PAD, which was subsequently analyzed with a bench scanner. The optimal operational parameters on DMF were 45 s reaction time with circular mixing and capture of the image after 5 min. Under optimized conditions, a linear behavior was obtained for creatinine concentrations ranging from 2 to 32 mg dL-1, with limits of detection and quantitation equal to 1.4 mg dL-1 and 3.1 mg dL-1, respectively. For the concentration range tested, the relative standard deviation varied from 2.5 to 11.0%, considering four measurements per concentration. Creatinine-spiked synthetic urine samples were subjected to analysis via DMF-PAD and the spectrophotometric reference method. The concentrations of CR determined using both analytical techniques were close to the theoretical values, with the resultant standard deviations of 2-9% and 1-4% for DMF-PAD and spectrophotometry, respectively. Furthermore, the recovery values were within the acceptable range, with DMF-PAD yielding 96-108% and spectrophotometry producing 95-102%. Finally, the greenness levels of DMF-PAD and spectrophotometric methods were evaluated using the Analytical Greenness Metric software, in which 0.71 and 0.51 scores were obtained, respectively. This indicates that the proposed method presents a higher greenness level, mainly due to its miniaturized characteristic using a smaller volume of reagent and sample and the possibility of automation, thus reducing user exposure to potentially toxic substances. Therefore, the DMF-PADs demonstrated great potential for application in the clinical analysis of creatinine, aiding in routine tests by introducing an automated, simple, and environmentally friendly process.

Additive Manufactured Paper-PMMA Hybrid Microfluidic Chip for Simultaneous Monitoring of artificial urine Creatinine and pH.

Smartphone-based Portable Photoelectrochemical Biosensing System for Point-of-care Detection of Urine Creatinine and Albumin

Multi-Parameter Detection of Urine Based on Electropolymerized PANI: PSS/AuNPs/SPCE

Integration of paper-based analytical devices with digital microfluidics for colorimetric detection of creatinine

A Paper-Based Microfluidic Device for Real-Time Sweat Potassium Monitoring

Microfluidic Paper-based Analytical Devices for Determination of Creatinine in Urine Samples

Quantification of creatinine in whole blood by a paper-based device using an RGB sensor

Paper-based microfluidic devices for analysis of clinically relevant analytes present in urine and saliva

A Disposable Printed Amperometric Biosensor for Clinical Evaluation of Creatinine in Renal Function Detection

Colorimetric detection of serum creatinine on a miniaturized platform using hue-saturation-value space analysis

Development of a Quantitative Digital Urinalysis Tool for Detection of Nitrite, Protein, Creatinine, and pH

A copper oxide-ionic liquid/reduced graphene oxide composite sensor enabled by digital dispensing: Non-enzymatic paper-based microfluidic determination of creatinine in human blood serum

A Multi-Channel Urine Sensing Detection System Based on Creatinine, Uric Acid, and pH

An Automatic Whole Blood Analyzer for Renal Function Analysis with a Centrifugal Microfluidic Device

A Rapid, Maskless 3D Prototyping for Fabrication of Capillary Circuits: Toward Urinary Protein Detection.

A Low-cost Creatinine Biosensor by Differential Optical Signal Readout for the Whole Blood Analysis

A Novel Screen-Printed Microfluidic Paper-Based Electrochemical Device for Detection of Glucose and Uric Acid in Urine

Pretreated Screen-Printed Carbon Electrode and Cu Nanoparticles for Creatinine Detection in Artificial Saliva

Ultrasensitive colorimetric detection of creatinine via its dual binding affinity for silver nanoparticles and silver ions

Urine multi-index intelligent detection based on polymer/paper hybrid microfluidic biochip for hyperuricemia monitoring

Molecularly Imprinted Photonic Crystals for Rapid Onsite Detection of Creatinine